1. Introduction and Overview
The DJI Osmo Nano is a compact and powerful action camera designed to capture high-quality visuals in various scenarios. It features an all-new 1/1.3-inch sensor, capable of recording 4K/60fps video with a 143° wide FOV. The camera supports 10-bit & D-Log M color performance for stunning visuals and offers a lightweight, dual-sided magnetic design for versatile mounting. It boasts quick charging capabilities and extended runtime, along with live view and swift content transfer. The Osmo Nano camera is waterproof up to 10 meters, and its Vision Dock is IPX4-rated for splash resistance.
This manual provides essential information on how to use, maintain, and troubleshoot your DJI Osmo Nano. Please read it thoroughly before operating the device.
2. What's in the Box
The standard combo package for the DJI Osmo Nano includes the following items:
- Osmo Nano Camera × 1
- Osmo Nano Multifunctional Vision Dock × 1
- Osmo Nano Magnetic Hat Clip × 1
- Osmo Nano Magnetic Lanyard × 1
- Osmo Nano Protective Case × 1
- USB-C to USB-C PD Cable (USB 3.1) × 1
- Osmo Nano Dual-Direction Magnetic Ball-Joint Adapter Mount × 1
3. Getting Started
3.1 Activation
Before first use, ensure you activate your camera using the DJI Mimo App.
- When the camera is attached to the vision dock, press and hold the camera button or the vision dock button to power on.
- Scan the QR code on the screen to download the DJI Mimo App.
- Enable Wi-Fi and Bluetooth on your mobile device.
- Launch the DJI Mimo App, tap the camera icon to connect, and follow the on-screen instructions to activate the camera.
3.2 Firmware Update
A prompt will appear in the DJI Mimo App when new firmware is available. Tap the prompt and follow the on-screen instructions to update the firmware.
3.3 Charging
Open the USB-C port cover and use the provided cable to connect the USB-C port to a charger. A USB-C PD charger is recommended for optimal charging.
4. Operating the Product
4.1 Button Features
The DJI Osmo Nano features a Camera Button and a Vision Dock Button. Their functions can be customized via the touchscreen settings.
Camera Button
- When powered off: Press once to power on and start recording (SnapShot). Press again to stop recording. Press and hold to power on.
- When powered on: Press once to take a photo or start/stop recording. Press twice to switch to the custom shooting mode and start shooting. Press and hold to power off.
Vision Dock Button
- Press and hold: Power on/off.
- When powered on: Press once to take a photo or start/stop recording. Press twice to enter the shooting mode quick switch page, then press again to cycle through preset shooting modes.
4.2 Operating the Touchscreen
After the camera powers on, the touchscreen displays the liveview, allowing you to control various settings.
- Storage Capacity/Remaining Recording Time: Indicates available storage.
- Playback: Swipe left from the right edge to return to liveview. Playback is in low resolution when camera and vision dock are separate.
- Shooting Mode: Displays the current shooting mode.
- Camera Battery Level: Tap to view battery levels for both camera and vision dock.
4.3 Setting the Shooting Mode
To change the shooting mode:
- Tap the icon or swipe left/right on the screen to enter the mode switch page.
- Swipe to select a desired shooting mode.
- Tap the selected mode or swipe up from the bottom to return to liveview.
4.4 Setting the Shooting Parameters
Various parameters can be set in different shooting modes. Swipe up from the bottom of the screen to access and adjust parameters for each shooting mode.
Key Features:
- Pre-Rec: When enabled, the camera pre-records footage within a set duration. Pressing the shutter/record button saves the latest pre-recorded footage and continues recording.
- Loop Recording: Records video by overwriting older footage at selected time intervals, saving storage space.
- EIS (Electronic Image Stabilization) modes:
- Off: Records with the largest Field of View (FOV).
- RockSteady: Stabilizes footage while retaining movement dynamics, ideal for sports.
- Horizon Correction: Eliminates image shakes within ±15° for horizontal stability.
- Horizon Balancing: Eliminates image shakes within ±30° for horizontal stability, suitable for first-person perspective.
- D-Log M: Designed for professional color grading, enlarging dynamic range in high-contrast or multi-color scenarios.
- 10-bit color depth: Enables smoother color transition.
4.5 Control Center
Swipe down from the top of the screen to enter the Control Center. Swipe up from the bottom to return to liveview. Here you can adjust image/audio parameters, enable Pro settings, and manage wireless microphone connections.
4.6 Wireless Microphone
The camera can connect to two DJI wireless microphone transmitters simultaneously. Follow the on-screen instructions for linking. Once linked, the transmitter can control recording and capture audio.
In the Control Center, tap the microphone icon and enable "Built-in Mic Audio Backup" to record audio with the camera's built-in microphone as a separate .wav file.
5. Footage Storage and Transfer
5.1 Storage Space
The camera has built-in storage and supports expandable storage via a microSD card in the vision dock. Swipe down from the top of the screen and then swipe left to check storage information. Tap "Storage" to format internal storage or the microSD card.
Important: Formatting will permanently delete all data. Back up all required data before formatting.
5.2 Transferring Files to microSD Card
With the microSD card inserted and the camera attached to the vision dock (lens facing forward), navigate to the storage space page and tap "Export to SD card" to transfer footage from the camera's internal storage to the microSD card.
5.3 Transferring Files to a Mobile Device
Connect the camera to the DJI Mimo App, tap the album icon to preview and download photos and videos. Alternatively, connect the camera (attached to the vision dock, lens forward) to your mobile device using the provided cable. Files can then be viewed and transferred via the device's album or file management.
5.4 Transferring Files to a Computer
Attach the camera to the vision dock (lens facing forward) and connect it to a computer using the provided cable. A pop-up will appear on the touchscreen. Select a file transfer option based on the storage location to download files. The camera cannot take photos or record videos during file transfer.
Note: If the camera cannot automatically recognize the connected device, enter the control center, tap > USB mode, and reconnect the camera. Reconnect the device to the computer if a file transfer is interrupted.
6. Usage Notes
6.1 General Usage
Contacts and slots may become hot during use; avoid prolonged touching. For extended holding, use the illustrated holding method or a protective case. A magnetic lanyard can be used for shooting, but be careful to avoid pinching your fingers.
Important Safety Notes:
- Ensure the camera is fully attached to the magnetic plate to prevent falling.
- Do not attach the vision dock when using the magnetic lanyard.
- Avoid using the magnetic lanyard on thick clothing, as this may weaken the magnetic connection.
- Do not use the magnetic lanyard during intense movements.
- The Dual-Direction Magnetic Ball-Joint Adapter Mount is suitable for short-term static fixed shooting. Do not use in high-impact situations.
- Attach the suction cup to a smooth, clean, and flat surface. Avoid curved, rough, dusty, or dirty surfaces.
6.2 Underwater Usage
The camera can be used underwater at depths of up to 10 meters. The multifunctional vision dock cannot be used underwater; remove it before submerging the camera.
- Ensure the lens protective cover is firmly mounted and its rubber ring is clean for waterproof performance. Do not tamper with the camera's built-in waterproofing holes.
- Check the lens protective cover for damage; replace immediately if found. Ensure the cover and lens are dry and clean.
- Avoid jumping into water at high speed with the camera to prevent water seepage.
- Rinse the camera with tap water after underwater use and allow it to dry naturally.
- DO NOT dry the camera with hot air (e.g., hair dryer) as this can damage internal membranes and compromise waterproofing.
- Ensure the camera is dry before changing the lens protective cover to prevent fogging.
6.3 Cleaning
- DO NOT spill liquids containing alcohol or cleansing solution on the camera.
- If microphone holes, heat dissipation slots, or other parts are blocked by sand or foreign matter, rinse with fresh water while the camera is in a sealed waterproof state.
- DO NOT frequently remove the lens protective cover to avoid dust accumulation.
- Clean the lens with a lens cleaning pen, air blower, or cleaning cloth.
- Ensure quick-release slots are clear of dust and sand when attaching the Quick-Release Adapter Mount.
- Clean wet or dirty contacts with a soft, dry cloth before connection to prevent short circuits or corrosion.
6.4 Battery
- Discharge and charge the battery completely once every three months to maintain good condition.
- Charging the battery will exit low-power state if the voltage is too low.
- DO NOT store the battery for extended periods after full discharge to prevent irreparable damage from over-discharge.
- Discharge the battery to 40-65% if not used for 10 days or more to extend battery life.
7. Troubleshooting
- Firmware Update Failure:
- Restart the camera and DJI Mimo App.
- Enable Wi-Fi and Bluetooth on the mobile device.
- Connect the camera to DJI Mimo App and try the update again.
- DJI Mimo App Connection Issues:
- Ensure both Wi-Fi and Bluetooth are enabled on your mobile device.
- Verify that the DJI Mimo App has the latest firmware version.
- In the liveview, swipe down from the top of the screen and tap > Wireless Connection > Reset Connection. This will reset all connections and Wi-Fi passwords.
- Camera Activates Unexpectedly (SnapShot): The camera's SnapShot feature is designed to power on and immediately start recording with a single press. This is a default setting for quick capture. If you prefer not to record immediately, you can customize button functions in the settings.
8. User Tips
- Upon arrival, check the packaging for any damage, but rest assured the product itself is often well-protected and original.
- Take time to test all features of your new action camera to fully appreciate its impressive image quality and construction.
- The product comes with a complete set of accessories; ensure all items listed in the 'What's in the Box' section are present.
- For optimal performance and to enjoy all features, ensure you update the camera to the latest firmware version via the DJI Mimo App.
9. Specifications
For a comprehensive list of specifications, please visit the official DJI website: https://www.dji.com/nano/specs
Key specifications include:
| Attribute | Value |
|---|---|
| Video Format | MP4 |
| Category | Sports & Action Video Cameras |
| Supporting Language | Ukrainian, Japanese, French, German, Italian, Spanish, Portuguese, Russian, English, Swedish, Polish, Greek, Turkish, Korean, Dutch, Latin American Spanish, Brazilian Portuguese, Simplified Chinese, Traditional Chinese Style |
| Application | For Home, Semi-professional, Extreme Sports, Outdoor Sport Activities, Bicycle, CAR DVR, Diving, Beginner, Professional |
| NFC Support | No |
| Bluetooth Support | Yes |
| Waterproof | Yes |
| WIFI Support | No |
| Remote Control Support | No |
| NightShot Function | Yes |
| Touch Screen | Yes |
| Memory Card Type | MicroSD / TF |
| Package | Yes |
| Image Stabilization | Electronic Image Stabilization |
| Built-in Mic | None |
| Effective MegaPixel | >25MP |
| Image Sensor | GC Series |
| Main Processor (Maximum HD Support) | Ambarella H22 (4K/60FPS) |
| Brand Name | DJI |
| Origin | Mainland China |
| Certification | CE, FCC |
10. Frequently Asked Questions (FAQ)
- Q: Why does the camera activate before I intend to start recording?
A: The DJI Osmo Nano features a 'SnapShot' function, which by default, powers on the camera and immediately begins recording with a single press of the camera button. This is designed for quick capture. You can customize the button's behavior in the camera settings if you prefer a different action. - Q: Is the DJI Osmo Nano waterproof?
A: Yes, the Osmo Nano camera module itself is waterproof up to 10 meters. However, the multifunctional vision dock is not waterproof and must be removed before using the camera underwater. The vision dock is IPX4-rated, meaning it is resistant to splashes.
11. Warranty and Support
This content is subject to change without notice. For the latest version of the user manual and other documents, please download from the official DJI website:
https://www.dji.com/nano/downloads
If you have any questions about this document or require technical support, please contact DJI by sending a message to DocSupport@dji.com.
DJI and OSMO are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.