GGBEE 433Mhz RF Remote Control Switch

Contents

User Manual: GGBEE 433Mhz Wireless Remote Control Switch

Models: YL-DC01A (DC 9-72V), YL-AC02A (AC 75-220V)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your GGBEE 433Mhz Wireless Remote Control Switch. This device allows for convenient remote control of various electrical appliances such as water pumps, lights, and motors, offering enhanced convenience and accessibility.

GGBEE 433Mhz Wireless Remote Control Switch with AC and DC receiver modules and remote controls
Figure 1: Overview of the GGBEE 433Mhz Wireless Remote Control Switch, showing both AC and DC receiver modules and remote controls.

The system utilizes a 433Mhz RF signal for reliable communication and is available in versions compatible with AC 75-220V or DC 9-72V power supplies. The receiver features a 30A relay, suitable for controlling a wide range of devices.

2. Safety Precautions

  • Ensure the operating voltage does not exceed the specified limits for the receiver and remote control.
  • Installation should be performed by a qualified electrician to prevent electrical hazards.
  • Keep the device and remote control out of reach of children.
  • Do not use the remote control in damp environments to prevent damage.
  • Avoid installing the receiver in areas with significant wireless interference, as this may decrease the transmission range.
  • Always disconnect power before performing any wiring or maintenance.

3. Product Components

The GGBEE Wireless Remote Control Switch system typically includes:

  • Receiver Module (AC 75-220V or DC 9-72V version)
  • Remote Control Transmitter(s)
Internal view of the receiver module showing components like antenna, learning button, and indicator light
Figure 2: Internal components of the receiver module, highlighting the antenna, learning button, and indicator light. Rated current: 30A, Working Frequency: 433Mhz, Coding method: learning code 1527.
Close-up of the remote control unit with ON and OFF buttons
Figure 3: The remote control unit, featuring ON and OFF buttons.

4. Specifications

4.1 Receiver Module (Models: YL-DC01A, YL-AC02A)

Feature Specification (DC 9-72V) Specification (AC 75-220V)
Working Voltage DC 9-72V AC 75-220V
Rated Current 30A 30A
Max Power 2100W (DC01A) 3600W (AC02A)
Receiving Frequency 433MHz 433MHz
Receive Sensitivity -105DB / -110dBm -105DB / -110dBm
Modulation Method ASK (Amplitude Modulation) ASK (Amplitude Modulation)
Coding Method Learning Code 1527 Learning Code 1527
Stand-by Current ≤20mA ≤20mA
Dimensions 66*44*29mm (approx. 2.6*1.7*1.1 inches) 65*58*30mm (approx. 2.6*2.3*1.2 inches)
Weight 50g/70g (White shell) 50g/70g (White shell)
Material Plastic
Certification CE
Dimensions and parameters for the DC 9-72V receiver module
Figure 4: Detailed parameters and dimensions for the DC 9-72V receiver module.
Dimensions and parameters for the AC 75-220V receiver module
Figure 5: Detailed parameters and dimensions for the AC 75-220V receiver module.

4.2 Remote Control Transmitter

Feature Specification
Operating Voltage DC 12V (23A/12V battery x1) / DC 3V (CR2032 button cell)
Transmitting Frequency 433MHz / 315 MHz / 433.92 MHz
Encoding Type Fixed code / EV1527
Static Current 0.1uA
Launch Current 11mA
Transmit Power 6-8dBm
Transmission Distance 100M (Open field) / 100-300M (Depends on remote control)
Operating Temperature -20-70°C
Dimensions 55*28*10mm / 61*28.5*12mm
Net Weight 26g (including housing and keyring)
Housing Material ABS + metal housing, silicone buttons

5. Setup and Installation

5.1 Wiring the Receiver Module

Ensure all power is disconnected before proceeding with wiring. Connect the receiver module according to the appropriate diagram for your voltage type (AC or DC).

Wiring diagram for AC 75-220V receiver, showing connections for input, output, and an optional contactor for high-power loads.
Figure 6: AC 75-220V Wiring Diagram. Connect 220V input to L and N terminals. Connect your load (e.g., motor) to the output terminals. For loads greater than 600W, an AC contactor is required.
Wiring diagram for DC 9-72V receiver, showing connections for input, output, and an optional contactor for high-power loads.
Figure 7: DC 9-72V Wiring Diagram. Connect DC 9-72V input to the appropriate terminals. Connect your load (e.g., motor) to the output terminals. For loads greater than 600W, an AC contactor is required.

Important Note:

If the power of the pump motor or other load is greater than 600W, it is necessary to add an AC contactor. This is because the current and voltage can fluctuate significantly when a high-power motor starts, which could damage the relay.

5.2 Pairing the Remote Control (Learning Method)

The receiver and remote control need to be paired for proper operation. Follow these steps:

  1. Ensure the receiver is powered on.
  2. Press the learning button on the receiver a specific number of times depending on the desired operating mode (see Section 6.1). The indicator light will flash.
  3. While the indicator light is flashing, press the desired button on your remote control.
  4. The indicator light on the receiver will flash a few times and then turn off, indicating successful pairing.
Visual guide for pairing the remote control with the receiver module
Figure 8: Visual guide for the pairing process. Power on the receiver, press the learning button, then press the remote button to pair.

6. Operating Modes and Learning Methods

The receiver supports several operating modes, each configured by pressing the learning button a specific number of times:

6.1 Learning Operating Modes

  • Momentary Mode:

    Press the learning button 1 time. The LED indicator will flash once. Then, press the transmitter button. The LED indicator will flash 3 times, indicating successful learning. In this mode, the relay is active only while the remote button is pressed.

  • Toggle (Self-lock) Mode:

    Press the learning button 2 times. The LED indicator will flash twice. Then, press the transmitter button. The LED indicator will flash 3 times, indicating successful learning. In this mode, one press of the remote button turns the relay ON, and another press turns it OFF.

  • Latched (Interlock) Mode:

    Press the learning button 3 times. The LED indicator will flash 3 times. Then, press the "A" button on the transmitter, wait for the indicator light to flash 3 times, then press the "B" button. The indicator will flash 3 times and go off, indicating successful learning. In this mode, pressing one button turns the relay ON, and pressing another button turns it OFF (typically used with multi-button remotes where one button is ON and another is OFF).

  • Delay Time (5S) Mode:

    Press the learning button 4 times. The LED indicator will flash 4 times. Then, press the transmitter button. The LED indicator will flash 3 times, indicating successful learning. In this mode, the relay will turn ON and stay ON for 5 seconds after the remote button is pressed, then turn OFF automatically.

  • Delay Time (10S) Mode:

    Press the learning button 5 times. The LED indicator will flash 5 times. Then, press the transmitter button. The LED indicator will flash 3 times, indicating successful learning. The relay will turn ON and stay ON for 10 seconds, then turn OFF automatically.

  • Delay Time (15S) Mode:

    Press the learning button 6 times. The LED indicator will flash 6 times. Then, press the transmitter button. The LED indicator will flash 3 times, indicating successful learning. The relay will turn ON and stay ON for 15 seconds, then turn OFF automatically.

  • Delay Time (20S) Mode:

    Press the learning button 7 times. The LED indicator will flash 7 times. Then, press the transmitter button. The LED indicator will flash 3 times, indicating successful learning. The relay will turn ON and stay ON for 20 seconds, then turn OFF automatically.

6.2 Clearing Paired Remote Controls

To clear all paired remote controls from the receiver's memory:

  • Press and hold the learning button for approximately 8 seconds. The receiver's LED indicator will flash 3 times and then turn OFF. This indicates that all previously paired remote controls have been cleared.

7. Product Application Areas

This versatile remote control switch is suitable for a wide range of applications, enhancing convenience and control in various settings:

  • Home Automation: Control lighting (ceiling lights, incandescent, fluorescent), electric fans, aquariums, and other household appliances.
  • Industrial & Commercial: Ideal for controlling water pumps, motors, garage doors, electronic rolling gates, and retractable doors.
  • Agricultural Use: Can be used for agricultural irrigation systems.
Examples of product application areas including water pumps, ceiling lights, electric fans, and agricultural irrigation
Figure 9: Various application areas for the remote control switch.
Examples of industrial applications such as garage doors, electronic rolling gates, and retractable doors
Figure 10: Industrial and commercial applications of the remote control switch.

8. Maintenance

8.1 Remote Control Battery Replacement

The remote control uses a DC 12V (23A/12V) battery or a CR2032 button cell, depending on the specific remote model. If the remote's range decreases or it stops responding, replace the battery with a new one of the same type.

8.2 General Care

  • Keep both the receiver and remote control clean and dry.
  • Avoid exposing the devices to extreme temperatures or direct sunlight.
  • Do not attempt to open or repair the devices yourself, as this may void any potential warranty and poses a safety risk.

9. Troubleshooting

Problem Possible Cause Solution
Remote control not working / No response Low or dead battery in remote.
Remote not paired with receiver.
Out of range.
Replace remote battery.
Re-pair the remote control (see Section 5.2).
Move closer to the receiver.
Reduced transmission range Wireless interference.
Obstructions between remote and receiver.
Relocate receiver away from other wireless devices.
Ensure clear line of sight or reduce obstructions.
Receiver indicator light not turning on No power to the receiver.
Incorrect wiring.
Check power supply to the receiver.
Verify wiring connections according to diagrams (Section 5.1).
Load (e.g., motor) not turning on/off reliably Load power exceeds relay capacity.
Incorrect operating mode selected.
Install an AC contactor for loads over 600W.
Re-learn the remote control in the desired operating mode (Section 6.1).

10. User Tips

  • For optimal performance, ensure the receiver's antenna is not obstructed or bent.
  • Consider the "Delay Time" modes for applications like automatic fan shut-off or temporary lighting.
  • If controlling multiple devices, consider purchasing additional remote controls and pairing them to different receivers or different modes on the same receiver.
  • The system is designed for ease of use, making it suitable for individuals with reduced mobility, pregnant women, and children for simple ON/OFF control of lights and appliances.
The remote control switch is suitable for various users including elderly, pregnant women, and children
Figure 11: The product's design caters to a wide range of users for convenient control.

11. Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact their customer service directly. Keep your purchase receipt as proof of purchase.

A PDF version of the user manual may be available for download from the product page or seller's website for future reference. (Reference: User manual (PDF))

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.