1. Product Overview
The Mijia Smart Sterilization Humidifier 2 is designed to provide a clean and comfortable indoor environment through efficient humidification and powerful UV-C sterilization. It features smart technology for constant humidity control, a large water tank, and quiet operation.

This diagram illustrates the internal and external components of the Mijia Smart Sterilization Humidifier 2, including the Inner Mist Outlet, Outer Mist Outlet, Water Tank Cover, Water Level Window, Water Tank, UV-C Light Cover, Essential Oil Compartment, Mode Indicator, Mode Button, Power Button, Wi-Fi Indicator, Base, Bottom Cover, Power Cord, Filter (with filter sponge inside), Floating Board, Vaporizer, Water Conduits, and Floater.
2. Setup
2.1 Unpacking and Placement
- Carefully remove the humidifier and all accessories from the packaging.
- Place the humidifier on a flat, stable surface, away from direct sunlight, heat sources, and electronic devices. Ensure there is enough space around the unit for optimal mist dispersion.
2.2 Filling the Water Tank
The humidifier features an easy-to-refill design, allowing you to add water without lifting the entire lid or removing the water tank.

Left: Lift the lid to add water without removing the water tank. Right: Lift the entire tank for cleaning or adding large amounts of water.
- Lift the top lid of the humidifier.
- Pour clean, cool tap water directly into the water tank. Do not exceed the maximum water level indicated by the transparent water level window.
- Alternatively, you can lift the entire water tank from the base to fill it, especially for initial setup or thorough cleaning.
- The transparent water level indicator allows you to monitor the remaining water level without lifting the lid.

The water tank features a transparent water level indicator to keep track of the remaining water.
2.3 Power Connection
- Connect the power cord to the humidifier's power input port (located at the bottom/rear of the base).
- Plug the other end of the power cord into a suitable 5V USB power outlet.
2.4 Initial Setup and Mi Home App Pairing
For smart control and advanced features, connect your humidifier to the Mi Home app.
- Download the Mi Home app from your device's app store.
- Open the app and follow the on-screen instructions to add a new device.
- Ensure your humidifier is powered on and the Wi-Fi indicator is blinking, indicating it's ready for pairing.
- Once connected, you can control the humidifier remotely and access its full range of functions.

Connect to the Mi Home app to access the full range of functions, including the timer and mist output.
2.5 Aromatherapy Setup
The humidifier includes an aromatherapy diffuser to create a soothing atmosphere.
- Locate the Essential Oil Compartment (refer to Figure 1).
- Add a few drops of your preferred essential oil to the designated compartment.
- Important: Aromatherapy oils must be purchased separately. To avoid damaging the device, do not place aromatherapy oils directly into the water tank or base.

The humidifier can infuse the air with essential oils to create a soothing atmosphere.
3. Operating Instructions
3.1 Power On/Off
- Press the Power Button (refer to Figure 1) to turn the humidifier on or off.
3.2 Mode Selection and Mist Output Adjustment
- Press the Mode Button (refer to Figure 1) to cycle through different operating modes or mist levels.
- The humidifier features a dual mist outlet that can be manually adjusted 360° to direct mist for whole-room coverage.
- It releases up to 350 mL of ultra-fine water droplets per hour.

The humidifier features a cutting-edge rotating mist dispenser, which rotates 360° to provide whole-room coverage without the need for constant repositioning.
3.3 Smart Humidity Control
The humidifier is equipped with smart technology to maintain optimal humidity levels.
- One-Touch Humidity Control: The humidity is automatically kept at 60% for optimal comfort.
- Adjustable Humidity Settings: Humidity settings can be adjusted via the Mi Home app.
- Automatic Mode: The mist output is automatically adjusted to keep humidity at optimal levels and prevent wet furniture. If the humidifier is operating at mist level 2 or 3 and the relative humidity reaches 85%, it will automatically switch back to mist level 1. If the relative humidity rises above 85% for more than 30 minutes, the humidifier will switch off automatically.

The humidifier quickly responds to changes in humidity to maintain a comfortable environment.
4. Maintenance
4.1 Cleaning the Water Tank
Regular cleaning is essential to prevent mineral buildup and maintain hygiene.
- Unplug the humidifier before cleaning.
- Lift the water tank from the base. The large diameter water tank is designed for easy cleaning.
- Rinse the tank with clean water. For stubborn mineral deposits, use a soft brush and a mild descaling agent (e.g., white vinegar solution).
- Wipe the inside of the tank and the base with a soft, damp cloth. Do not immerse the base in water.
4.2 Filter Maintenance
The humidifier includes a filter with a filter sponge inside (refer to Figure 1).
- Periodically check the filter for any debris or discoloration.
- Clean the filter sponge as needed by rinsing it under running water.
- Replace the filter if it shows signs of wear or if humidification performance decreases.
4.3 UV-C Sterilization
The built-in UV-C lamp automatically sterilizes the water, reducing the need for frequent manual sterilization of the water itself.

The UV-C ultraviolet sterilization technology eliminates up to 99.9% of bacteria before the water is released into the stream of mist.
5. Troubleshooting
- No Mist Output: Check if the water tank is empty. The humidifier has water-shortage power-off protection and a dual protection mechanism that automatically switches off when the tank is empty or removed from the base. Refill the tank or ensure it is correctly seated.
- Excessive Humidity/Wet Surfaces: Ensure the automatic mode is enabled or adjust the humidity settings via the Mi Home app. The device is designed to prevent excessive humidity by adjusting mist output or switching off.
- Unusual Noise: The humidifier operates at a whisper-quiet 32 dB. If you notice unusual noise, ensure the unit is on a flat surface and the water tank is properly installed. Check for any foreign objects in the water tank or mist outlet.
- App Connectivity Issues: Ensure your Wi-Fi network is stable and the humidifier is within range. Restart the humidifier and your router if necessary, then attempt to re-pair with the Mi Home app.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XIAOMI |
| Model Number | MJJSQ05DY |
| Type | Ultrasonic Humidifier |
| Humidification Method | Mist Discharge |
| Humidifying Capacity | 300ml/h |
| Mist Output (gallon / day) | 350ml/h |
| Capacity | 4.5L (for up to 32 hours continuous operation) |
| Mist Outlet Quantity | Two (360° adjustable) |
| Operation Method | Remote Control / Touch Type |
| Humidity Control | Touch Type / Smart Control via App |
| Coverage Area | 31-40㎡ |
| Power (W) | 25W |
| Voltage | 5V |
| Power Type | USB |
| Noise | 32 dB (Whisper-quiet operation) |
| Function | Aromatherapy, UV-C Sterilization |
| Water-shortage Power-off Protection | Yes |
| Timing Function | No (but app control may offer scheduling) |
| Certification | CE |
| Product Dimensions (approx.) | Height: 23cm, Width: 24cm, Length: 40cm |
| Product Weight (approx.) | 2.004 kg |
7. User Tips
- For best results, use distilled or demineralized water to minimize mineral buildup and extend the life of the humidifier.
- Regularly check the water level, especially during continuous operation, to ensure uninterrupted humidification.
- Experiment with different essential oils in the aromatherapy compartment to find your preferred scent and create a relaxing atmosphere.
- Utilize the Mi Home app for advanced scheduling and fine-tuning of humidity levels to suit your personal comfort.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact your local authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.