1. Introduction
The Canaan Avalon Mini 3 is a compact and efficient Bitcoin ASIC mining machine designed for home use. It combines powerful cryptocurrency mining capabilities with a heating function, making it a versatile device for enthusiasts. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Avalon Mini 3 miner.
Note: This product is sold in used condition but is verified to be of good quality and fully functional.
Video: Overview of the Canaan Avalon Mini 3 miner, showcasing its design and features.
2. Safety Information
- Crucial: Ensure the input voltage is 220V. Incorrect voltage can cause irreversible damage to the miner.
- Do not block the air vents of the miner. Proper ventilation is crucial for performance and safety.
- Keep the device away from water, moisture, and high humidity.
- Do not attempt to open or repair the device yourself. Refer to qualified personnel for service.
- Place the miner on a stable, flat surface.
- The miner can generate significant heat; ensure adequate clearance from flammable materials.
3. Package Contents
Verify that all items are present in your package:
- Canaan Avalon Mini 3 BTC Miner
- Power Cable (specific type not detailed, assume standard for region)
- User Manual (this document, or a printed version)

Image: The retail packaging for the Avalon Mini 3, showing the product illustration on the box.
4. Product Overview
The Avalon Mini 3 features a sleek, horizontal design with integrated controls and display.

Image: Front view of the Canaan Avalon Mini 3 miner, showing the Canaan logo and ventilation grilles.

Image: Side view of the Canaan Avalon Mini 3 miner, highlighting the power button and digital display panel.
Key Components:
- Power Button: To turn the device on/off.
- Digital Display: Shows operational status, temperature, and other information.
- Ventilation Grilles: For air intake and exhaust, crucial for cooling the ASIC chips.
- Power Input Port: For connecting the power cable.
- Network Port (Ethernet): For connecting to your local network.
5. Setup Instructions
5.1. Physical Placement
- Place the Avalon Mini 3 on a flat, stable, and non-flammable surface.
- Ensure there is at least 20 cm (8 inches) of clear space around all sides of the miner for proper airflow.
- Avoid placing the miner in direct sunlight or near heat sources.
- The operating environment temperature should be between -5℃ and 40℃.
5.2. Power Connection
- Connect the power cable to the power input port on the miner.
- Plug the other end of the power cable into a grounded 220V AC outlet.
- Important: Ensure the outlet provides stable 220V power. Incorrect voltage can cause irreversible damage.
5.3. Network Connection
- Connect an Ethernet cable from your router or network switch to the Ethernet port on the miner.
- Ensure your network has DHCP enabled for automatic IP address assignment, or be prepared to configure a static IP.
6. Operating Instructions
6.1. Initial Power On
- After connecting power and network, press the power button on the miner.
- The digital display will light up, showing a boot sequence (e.g.,