XIAOMI Xiaomi T1

Contents

Xiaomi Mijia Sweeping Robot Vacuum Cleaner 1T S-cross 3D User Manual

Model: Xiaomi T1 | Brand: XIAOMI

Introduction

The Xiaomi Mijia Sweeping Robot Vacuum Cleaner 1T S-cross 3D is an advanced robotic vacuum cleaner designed for efficient sweeping and mopping. It features 3D precise obstacle avoidance, 3D vSLAM visual navigation, and powerful 3000Pa suction. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your robot vacuum cleaner.

Xiaomi Mijia Robot Vacuum Cleaner 1T with app interface

Figure 1: Xiaomi Mijia Robot Vacuum Cleaner 1T with its companion app interface.

Package Contents

Ensure all the following items are present in your package:

  • Host (Robot Vacuum Cleaner) x1
  • Charging stand x1
  • Main brush cleaning tool x1
  • Power cord x1
  • Water tank x1
  • Mop x1
  • Side brush x1
Diagram of all items included in the package

Figure 2: Diagram illustrating the components included in the product package.

Safety Information

Before using the robot vacuum cleaner, please read and understand all safety instructions. Keep this manual for future reference.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Ensure the power cord is not damaged and is properly connected to the charging stand.
  • Do not use the robot in wet environments or near water.
  • Remove any loose cables, small objects, or fragile items from the cleaning area to prevent entanglement or damage.
  • Do not use the robot to pick up burning or smoking materials, such as cigarettes, matches, or hot ashes.
  • Do not block the robot's suction port or sensors.

Setup

1. Charging Stand Placement

Place the charging stand against a wall in an open area, ensuring there are no obstacles within 0.5 meters to either side and 1.5 meters in front. Connect the power cord to the charging stand and plug it into a power outlet.

2. Initial Charge

Place the robot vacuum cleaner on the charging stand. Ensure the charging contacts on the robot align with those on the stand. The robot will automatically begin charging. For first-time use, fully charge the robot before operation (approximately 4-5 hours).

Robot vacuum automatically recharging and resuming scan

Figure 3: The robot vacuum automatically returns to its charging dock and resumes scanning after charging.

3. App Connection (MIJIA APP)

Download the MIJIA APP from your app store. Follow the in-app instructions to add your Xiaomi Mijia 1T robot vacuum cleaner. You will need to set the APP region to China for proper functionality, as this is a Chinese version product. The robot can be set to speak English.

Hand holding phone with Mijia app showing cleaning map

Figure 4: Controlling the robot vacuum and viewing cleaning maps via the Mijia app.

Operating Instructions

1. Starting a Cleaning Cycle

Press the power button on the robot or use the MIJIA APP to start a cleaning cycle. The robot will begin sweeping and mopping according to its intelligent navigation system.

Robot vacuum in motion, illustrating speed and efficiency

Figure 5: The robot vacuum cleaner in operation, demonstrating its efficient movement.

2. Intelligent Navigation and Obstacle Avoidance

The robot utilizes S-cross TM 3D obstacle avoidance and 3D vSLAM visual navigation. It can intelligently perceive its environment, avoid obstacles, and map your home with high accuracy. The ToF 3D ranging technology helps prevent collisions and getting trapped in low spaces.

Robot vacuum projecting a 3D map of a room

Figure 6: The robot vacuum creating a 3D map of its surroundings for efficient navigation.

Robot vacuum avoiding obstacles

Figure 7: The robot vacuum's obstacle avoidance system in action.

3. Sweeping and Mopping Functions

The robot integrates both sweeping and mopping capabilities. It features a powerful 3000Pa suction for dust and debris, and an intelligent electric control water tank for even mopping. The water tank has 3 adjustable gears for water flow, suitable for different floor types.

Robot vacuum with detachable water tank

Figure 8: The robot vacuum with its detachable water tank for mopping functionality.

Robot vacuum mopping with even water distribution

Figure 9: The robot vacuum ensuring even water distribution during mopping.

4. Smart Map Management

After its initial cleaning tasks, the robot automatically generates a partition map of your home. You can edit these maps within the MIJIA APP to define specific cleaning zones, no-go zones, or schedule cleaning for particular areas.

App interface showing room partitioning

Figure 10: The Mijia app displaying a mapped area with room partitions.

Maintenance

1. Cleaning the Dust Box

Regularly empty the 550ML large capacity dust box. Press the release button, remove the dust box, and discard the collected debris. Clean the filter as needed.

2. Cleaning Brushes

Use the provided main brush cleaning tool to remove hair and debris from the main brush and side brush. Periodically check for any tangled hair and cut it with the cleaning tool if necessary.

Underside view of the robot vacuum showing brushes and wheels

Figure 11: Underside view of the robot, showing the main brush and side brush for cleaning.

3. Water Tank and Mop Maintenance

After mopping, remove the water tank and empty any remaining water. Clean the mop pad thoroughly and allow it to air dry before reattaching. Replace mop pads when they show signs of wear.

4. Sensor Cleaning

Wipe the robot's sensors (including cliff sensors, ToF sensor, and charging contacts) with a soft, dry cloth to ensure optimal performance and navigation accuracy.

Close-up of the robot's ToF sensor

Figure 12: Close-up of the robot's ToF sensor, which should be kept clean.

Troubleshooting

Problem Possible Cause Solution
Robot does not start or respond. Low battery; Power button not pressed; Robot stuck. Charge the robot; Press and hold the power button; Clear any obstructions.
Poor cleaning performance. Full dust box; Clogged filter; Tangled brushes. Empty dust box; Clean/replace filter; Clean main and side brushes.
Robot gets stuck frequently. Obstacles in path; Dirty sensors; Low clearance areas. Clear floor of clutter; Clean sensors; Use no-go zones for low clearance areas.
Mopping function not working. Empty water tank; Clogged water outlet; Mop pad not attached correctly. Fill water tank; Clean water tank outlet; Reattach mop pad.
App connection issues. Incorrect Wi-Fi password; Robot out of range; App region setting. Verify Wi-Fi credentials; Move robot closer to router; Ensure MIJIA APP region is set to China.

Specifications

Feature Detail
Model Xiaomi T1
Dimensions (mm) 353 x 350 x 81.5
Power (W) <500W (Product net weight: 40W)
Voltage 100-240V
Battery 5200mAh
Suction Strength 3000Pa
Dust Box Capacity 0.5 L (550ML)
Water Tank Capacity 250ML
Filter Type HEPA
Cleaning Route Planned Type (3D vSLAM visual navigation)
Obstacle Avoidance S-cross TM 3D (ToF 3D ranging)
Max Cleaning Area 240 square meters (sweeping)
Max Mopping Area 160 square meters (mopping)
Endurance Up to 180 minutes
Connectivity MIJIA APP remote control
Certification CB, CE
Robot vacuum with dimensions 353x350x81.5mm

Figure 13: Dimensions of the Xiaomi Mijia Robot Vacuum Cleaner 1T.

User Tips

  • App Region Setting: Remember to set your Xiaomi MIJIA APP region to China for full functionality, as this is a Chinese version product. The robot supports English voice prompts.
  • Pre-Cleaning Prep: Before starting a cleaning cycle, clear the floor of small objects, cables, and fragile items to prevent the robot from getting stuck or damaging items.
  • Regular Maintenance: Consistent cleaning of the dustbin, filters, and brushes will significantly extend the robot's lifespan and maintain optimal cleaning performance.
  • Firmware Updates: Check the MIJIA APP regularly for firmware updates (OTA online upgrade) to ensure your robot has the latest features and improvements.
  • Water Tank Usage: For best mopping results, use purified water in the water tank and clean the mop pad after each use.
Phone screen showing an OTA update progress for the robot

Figure 14: Example of an OTA online upgrade for the robot vacuum via the app.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Xiaomi support channels or contact your retailer. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. This document provides comprehensive instructions and diagrams for all aspects of your robot vacuum cleaner. You can typically find this on the product support page of the official Xiaomi website or the retailer's website where you purchased the product.

For further assistance, you may also refer to the official user manual PDF: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.