User Manual: Tinsol Portable Electric Tire Inflator

Introduction

This manual provides essential information for the safe and efficient operation of your Tinsol Portable Electric Tire Inflator. Please read it thoroughly before first use and keep it for future reference.

This device is a versatile cordless tire inflator designed for various inflation needs, including car, motorcycle, bicycle tires, and sports balls. It features a powerful motor, smart digital display with preset modes, auto-stop function, a high-capacity 4000mAh battery, and multi-functional emergency lighting.

Safety & Warnings

Read all instructions before use to ensure safety and prevent damage.

• Children: Keep the device out of reach of children under 3 years old. Children should be supervised when near the device.
• Storage: Store the device in a dry place, free from moisture. It should also be stored in a well-ventilated area.
• Intended Use: Do not use this product for purposes other than its intended use (inflating tires and balls).
• Inspection: Inspect the product before each use. Do not use if damaged.
• Installation & Operation: Follow installation and operation guidelines to avoid injury.

For more detailed safety information, refer to the official user manual PDF: User Manual (PDF).

Product Overview

The Tinsol Portable Electric Tire Inflator is a compact and powerful device. It includes the main unit, an inflation tube, various nozzle adapters, and a Type-C charging cable.

Components and Controls

1. Emergency lamp
2. Inflatable tube interface
3. Type-C interface (Charging Port)
4. Inflatable mode button
5. Tire pressure display
6. Units Display
7. Power display (Battery Indicator)
8. Lighting button
9. Reduce pressure value (-)
10. Increase pressure value (+)
11. Switch Mode button
12. On/Off button

Specifications

Setup

1. Unpacking and Inspection

1. Unpack the product and remove the main unit, air hose, air nozzle adapters, and Type-C charging cable.
2. Check that the main unit's casing, buttons, and display are in good condition.
3. Ensure the air hose is free from damage or cracks.
4. Verify that all accessories are present.

2. Connecting the Inflation Nozzle

1. Connect one end of the inflation hose to the unit's inflation port (labeled 2 in the diagram).
2. For the other end, select the appropriate nozzle for the item being inflated (e.g., car tire, bicycle tire, ball).
3. Screw the selected nozzle securely onto the tire valve or the item's inflation port.
4. Ensure the connection is secure and free from air leaks.

Operating Instructions

1. Powering On and Setting Parameters

1. Press and hold the On/Off button (labeled 12) to switch on the unit.
2. Use the unit selection button (labeled 6 or part of mode button) to choose the desired pressure unit (Bar, PSI, kPa, or kg/cm²).
3. Press the Switch Mode button (labeled 11) to cycle through the preset inflation modes (Car, Motorcycle, Bicycle, Ball). Alternatively, use the [+] (labeled 10) and [-] (labeled 9) buttons to manually adjust the target pressure.
4. Set the target pressure to match the standard pressure for the item you are inflating.

Preset Modes and Ranges:

• Car Mode: Default 2.5 bar (Adjustable range: 1.8-3.5 bar)
• Motorcycle Mode: Default 2.4 bar (Adjustable range: 1.8-3.0 bar)
• Bicycle Mode: Default 45 psi (Adjustable range: 30-65 psi)
• Ball Mode: Default 8 psi (Adjustable range: 4-16 psi)

2. Start Inflation

1. Once the connections are confirmed and the target pressure is set, press the On/Off button (labeled 12) to start inflation.
2. The device will automatically inflate the item to the target pressure.
3. The inflator will automatically stop when the preset pressure is reached, preventing over-inflation.
4. You may pause the inflation process manually at any time by pressing the On/Off button again.

3. Emergency Lighting

The inflator is equipped with a 3-mode LED work light for various situations:

• Daily Lighting: For general illumination in dark environments.
• SOS Flashing: To signal for help in emergency situations.
• Flash Warning: For visibility and warning others, especially during roadside emergencies.

Press the Lighting button (labeled 8) to cycle through these modes.

Maintenance

1. Finishing and Storage

1. Once inflation is complete, first unscrew the inflation nozzle from the item.
2. Then, disconnect the inflation hose from the main unit.
3. Switch off the power by pressing and holding the On/Off button.
4. Organize all accessories (nozzles, hose, charging cable) and store them with the main unit, preferably in the provided storage bag.

2. Battery Charging

The device is powered by a 4000mAh high-capacity battery and is rechargeable via a Type-C port.

• If the battery is low (indicated by the power display, labeled 7), recharge it promptly using the provided Type-C charging cable and a suitable power adapter.
• Charging duration is approximately 3-4 hours.

3. General Care

• Keep the device clean by wiping it with a soft, dry cloth.
• Avoid exposing the device to extreme temperatures, direct sunlight, or corrosive substances.
• Do not attempt to disassemble or repair the device yourself. Contact customer support if issues arise.

Troubleshooting

If you encounter issues with your Tinsol Portable Electric Tire Inflator, please refer to the following common solutions:

• Device not turning on: Ensure the battery is charged. Connect the device to a power source using the Type-C cable and try again after a few minutes of charging.
• Inflation not starting:
  • Check if the inflation hose is securely connected to both the inflator and the item being inflated.
  • Ensure the selected nozzle is appropriate and properly attached.
  • Verify that a target pressure has been set on the digital display.
• Inaccurate pressure reading: Ensure the nozzle is tightly sealed to the valve stem to prevent air leakage during measurement.
• Device stops prematurely: The device is designed to automatically stop when the preset pressure is reached. If it stops before reaching the target, check for leaks in the connection or if the battery is low.

If problems persist, consult the full user manual PDF or contact customer support.

User Tips

• Pre-set Pressure: Always set your desired pressure before starting inflation to utilize the auto-stop feature and prevent over-inflation.
• Check Connections: A tight seal between the nozzle and valve is crucial for accurate readings and efficient inflation.
• Regular Charging: Keep the battery charged, especially before long trips, to ensure the inflator is ready when needed.
• Emergency Use: Familiarize yourself with the emergency lighting modes (SOS, Flash Warning) for roadside safety.

Warranty & Support

This product is manufactured by Guangzhou dianxiu brand management co., ltd.

Manufacturer Contact Information:

• Address: Room 221, building e, no. 14-8 no. 8, shigang road, haizhu district, guangzhou city, guangdong province
• Email: W32255280@126.com
• Phone: 86-17620135010

For detailed warranty information, service, and additional guides, please refer to the complete user manual available as a PDF: User Manual (PDF).