Hustly Panamera 2010-2016 Digital Instrument Panel

Contents

Hustly 12.3-inch Digital Instrument Panel User Manual

For Porsche Panamera (2010-2016)

1. Product Overview

This 12.3-inch digital instrument panel is designed for Porsche Panamera models from 2010 to 2016. It features a full LCD display, integrating all gauge functions and providing a modern, high-definition interface for your vehicle's driving information.

12.3 inch HD LCD Screen with high brightness and adaptive adjustment
Figure 1: 12.3-inch HD LCD Screen with adaptive brightness.

Utilizing MIPI display signal drive technology, the panel delivers enhanced transparency and high-resolution pixel clarity through its RGB full-view-angle LCD screen. The clean, intuitive UI interface meets functional requirements while facilitating easy viewing of vehicle driving information.

The system runs on a Linux operating system, ensuring a fast boot-up time of approximately 2 seconds for a smooth operation experience. It supports almost all original vehicle functions, including total mileage, RPM, speed, tire pressure, gas tank level, water temperature, door opening reminders, safety belt reminders, warning lights, and various theme settings.

Hustly LCD instrument panel for Porsche Panamera 2010-2016
Figure 2: Hustly LCD Instrument Panel for Porsche Panamera (2010-2016).
LCD Digital Dashboard preserving original vehicle functions
Figure 3: LCD Digital Dashboard preserving original vehicle functions.

2. Setup and Installation

The installation of this digital instrument panel is designed to be non-destructive and plug-and-play, maintaining the original curvature and requiring no modification to the vehicle's existing wiring. Only two cables need to be connected.

Before and After installation comparison showing original car molding and full lamination
Figure 4: Before and After installation comparison, highlighting the seamless integration.
Features: No-destructive installation, 12.3 inches, 1920*720P, IPS, Plug & Play
Figure 5: Key installation features: Non-destructive, Plug & Play.

For detailed installation instructions, please refer to the comprehensive user manual PDF available at: User manual (PDF).

3. Operating Instructions

3.1. UI Interface Display

The instrument panel offers a variety of user interface styles and customization options. There are 5 UI style interfaces available, and each can be color-coded to your preference, allowing separate color customization for pointers and gauges.

Multiple UI Interface themes and colors available
Figure 6: Examples of various UI themes and color options.
Multiple User Interfaces showing different layouts and color schemes
Figure 7: More examples of multiple user interfaces.

The display features a Blue Anti-Glare LCD Screen, providing a high-definition screen with delicate image quality, good color display effect, and wide viewing angles for a cinematic experience, compared to ordinary screens with low image quality and narrow viewing angles.

Comparison of Blue Anti-Glare LCD Screen and Ordinary Screen
Figure 8: Blue Anti-Glare LCD Screen vs. Ordinary Screen.

3.2. Navigating Settings

The instrument panel settings can be accessed and configured through the steering wheel controls. The main settings menu includes options for Phone mirror, Meter, Time/date, and Interior lighting.

Video 1: Demonstration of UI navigation and settings adjustments.

3.2.1. Language Settings

The system supports multiple languages, including Chinese, English, Traditional Chinese, Korean, Russian, French, German, and Turkish. The language can be set to automatically match or selected manually. To change the language, navigate to Settings → Instrument Panel → Language and use the steering wheel button to confirm your selection.

3.2.2. Theme and Color Customization

You can switch between different themes (e.g., Theme 1, Theme 2) and customize their colors. Navigate to Settings → Dashboard → Theme to select a theme. For color customization, go to Settings → Dashboard → Theme Colors. The bezel color can match the theme color (On) or be customized independently (Off) via Settings → Instrument Panel → Bezel Color. Similarly, pointer styles can follow the theme color or be customized via Settings → Dashboard → Pointer Style.

3.2.3. Display and Brightness

Adjust the screen brightness according to your needs by going to Settings → Instrument Panel → Brightness Adjustment. The brightness range is 2-16, with separate settings for daytime and nighttime.

3.2.4. Vehicle Model Selection

During installation, select your specific vehicle model year (e.g., Panamera_14, Cayenne_11) under Settings → Instrument Panel → Model Selection. After selection, turn off the ignition, lock the vehicle, and wait 5 minutes for the settings to complete.

3.2.5. Connectivity and Advanced Settings

  • Physical Lights: Configure Off/Left/Right/Left-Mid-Right physical lights (Settings → Instrument Panel → Physical Lights).
  • Bluetooth: Manage Bluetooth connections (Settings → Dashboard → My Bluetooth).
  • Mobile Hotspot: Set up Wi-Fi hotspot (Settings → Tools → Configure your mobile hotspot Wi-Fi).
  • Engineering Mode: Enable or disable engineering mode (Settings → Instrumentation → Engineering Mode).
  • HDMI Display: Configure full-screen, non-full-screen, or no display for HDMI (Settings → Instrument Panel → HDMI Display).
  • Mobile Screen Mirroring Display: Configure full-screen, non-full-screen, or no display for mobile screen mirroring (Settings → Dashboard → Mobile Screen Mirroring Display).
  • WALN Country Code: Select your country code (Settings → Instrument → WALN Country Code).
  • Cab Orientation: Set to left or right (Settings → Instrument Panel → Cab Orientation).

3.2.6. Time and Date Settings

Set the time and date, and manage GPS/Daylight Saving Time options. Ensure the vehicle's central control clock is set to "On" for proper synchronization. (Settings → Time/Date)

3.2.7. Interior Lighting Settings

Configure interior light off duration, left/right turn signal light settings, ambient light brightness, exterior light off duration, daytime running lights, and lighting malfunction settings. (Settings → Interior Lighting)

3.2.8. Vehicle Settings

These settings are configured to original factory specifications and can be adjusted based on your preferences:

  • Rain Sensor: Adjust sensitivity (Sensitive, Normal, Slow) (Settings → Vehicle → Rain Sensor).
  • Auto Vehicle Locking: Enable or disable automatic vehicle locking (Settings → Vehicle → Auto Vehicle Locking).
  • Lowering Rearview Mirror: Open or close (Note: functionality may vary by vehicle) (Settings → Vehicle → Lower Rearview Mirror Settings).
  • Climate Control Mode: Set to Normal, Strong, or Soft (Settings → Vehicle → Climate Control Mode).
  • Air Conditioning Central Cooler: On/Off (Settings → Vehicle → Lower Rearview Mirror Settings).
  • Air Conditioning Ventilation Zone: On/Off (Settings → Vehicle → Air Conditioning Ventilation Zone).
  • Automatic Air Recirculation: On/Off (Settings → Vehicle → Automatic Air Recirculation).
  • Door Unlock Settings: Configure for driver's side door or all doors (Settings → Vehicle → Door Unlock Settings).
  • Door Lock Settings: Configure behavior after starting, turning on ignition, or turning off (Settings → Vehicle → Door Lock Settings).
  • Comfort Entry Function: On/Off (Settings → Vehicle → Air Conditioning Ventilation Zone).
  • Radio Settings: Configure station list and preset stations (Settings → Vehicle → Radio Settings).
  • Speed Limit: Set to Off, 50 km/h, or 150 km/h (Settings → Vehicle → Speed Limit).
  • Gear Shift Request: Enable or disable (Settings → Vehicle → Gear Shift Request).
  • Rearview Mirror Folding: Enable or disable (Settings → Vehicle → Rearview Mirror Folding).
  • Rear Wiper: Set to Auto or Manual (Settings → Vehicle → Rear Wiper).
  • Route Deviation Alert Time: Set to Middle, Early, or Delay (Settings → Vehicle → Route Deviation Alert Time).
  • Four-wheel drive malfunction: Set to Off/On (Settings → Vehicle → Four-wheel drive malfunction).

3.2.9. Steering Wheel Operation Settings

These settings allow customization of various functions accessible via the steering wheel:

  • PCM Function: Customize audio source switching, repeat commands, radio tracks, and map settings (Settings → Steering Wheel Controls → PCM Function).
  • Cluster Functions: Configure vehicle menu and trip menu settings (Settings → Steering Wheel Controls → Cluster Functions).
  • Horn: Set to Off/On (Settings → Steering Wheel Controls → Horn).
  • Lane Departure Warning: Turn off/on (Settings → Steering Wheel Controls → Lane Departure Warning).
  • Auto Start/Stop: Set to Off/On (Settings → Steering Wheel Controls → Auto Start/Stop).
  • Reset: Restore the instrument cluster to factory settings (Yes/No) (Settings → Steering Wheel Controls → Reset).

3.2.10. Unit Settings

You can set the units for various measurements:

  • Vehicle Speed: km/h or mph (Settings → Units → Vehicle Speed).
  • Temperature: Celsius (°C) or Fahrenheit (°F) (Settings → Units → Temperature).
  • Air Pressure: bar or psi (Settings → Units → Air Pressure).
  • Fuel Consumption: 1/100km, km/l, mpg (US), or mpg (UK) (Settings → Units → Fuel Consumption).

4. Maintenance

The digital instrument panel provides information and settings related to vehicle maintenance:

  • Maintenance Reminders: Displays sequences for engine oil maintenance, next maintenance, and interim maintenance, showing remaining kilometers and days.
  • Engine Oil Level: Displays the vehicle's original engine oil level based on data transmitted by the vehicle's system.
  • Fault Information: Displays the original vehicle's fault codes sequentially.
  • Tire Pressure: Tire pressure information will update after driving a certain distance. You can access tire settings via the tire pressure interface to compare tire size with original vehicle settings.
After installation comparison showing multiple themes, HD display, full screen digital display
Figure 9: Digital display showing various vehicle information and settings.

5. Troubleshooting

If you encounter any issues with your digital instrument panel, please consider the following general troubleshooting steps:

  • Check Connections: Ensure all cables are securely connected as per the installation guide.
  • System Reset: If the display is unresponsive or behaving unexpectedly, try performing a system reset through the settings menu (Settings → Steering Wheel Controls → Reset).
  • Software Version: Verify the current software version under Settings → Dashboard → Version Information. Ensure it is up-to-date.
  • Refer to PDF Manual: The detailed user manual (PDF) contains specific troubleshooting sections and diagrams that may help resolve complex issues.
  • Contact Support: If problems persist, please contact customer service for further assistance.

6. Specifications

FeatureSpecification
Product NameDigital Instrument Panel
CompatibilityPorsche Panamera 2010-2016
Operating SystemLinux System
Screen Size12.3 inches
Resolution1920*720
Screen TypeBlue light anti-glare screen, IPS
Special Features12.3 inch LCD digital display, supports original vehicle functions
Language SupportEnglish, Chinese, Japanese, Russian, Korean, Arabic, Ukrainian, Turkish, etc.
Item Weight2.3 kg
Placement on VehicleInstrument panel
Package Dimensions (L x W x H)40 cm x 25 cm x 20 cm
Package Weight3.0 kg
Product information table showing specifications
Figure 10: Product Information Summary.

7. Warranty and Support

The product comes with a 365-day replacement warranty. This warranty does not cover damage caused by human factors, misuse, abuse, or unauthorized modification of the product. If you encounter a product problem within one year of receiving the product, a free warranty will be provided, covering the cost of parts replacement. Please contact customer service first to address any after-sales issues.

For further assistance, please refer to the detailed user manual (PDF) or contact our support team.

8. User Tips

  • Navigation System Compatibility: The unit supports map settings via the PCM function. If you are in the UK or another region, ensure your vehicle's original navigation system is compatible or check the settings for regional map support.
  • Initial Setup: After installation and selecting your vehicle model, remember to turn off the ignition, lock the vehicle, and wait for 5 minutes to allow the settings to fully apply.
  • Customization: Explore the various UI themes and color customization options for both the bezel and pointers to personalize your driving experience.
  • Brightness Adjustment: Utilize the separate daytime and nighttime brightness settings for optimal visibility in all conditions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.