1. Introduction
Thank you for purchasing the JYX T39-T Multifunctional Bluetooth Speaker. This manual provides important information regarding the setup, operation, and maintenance of your speaker. Please read it thoroughly before using the product to ensure proper and safe operation. Keep this manual for future reference.
The JYX T39-T is a versatile outdoor speaker featuring RGB lighting and two microphones, perfect for parties and karaoke.
2. Package Contents
Please check the box for the following items:
- JYX T39-T Multifunctional Speaker
- Microphone (x2)
- Remote Control
- Audio Cable
- Charging Cable (Type-C)
Ensure all components are present in the package.
3. Controls Overview
3.1. Control Panel Functions
- Power button: Long press to turn on/off.
- Mode: Short press to switch between BT, TF card, USB, and AUX-IN modes. In BT mode, long press to disconnect Bluetooth.
- Next: In BT/USB/TF card modes, short press to play the next track; in USB/TF card modes, long press to fast forward.
- Play/Pause: In BT/USB/TF card modes, short press to pause/resume playback. In USB and TF card modes, long press to set single-track repeat or all-track repeat. In AUX mode, short press to mute/unmute the track. In BT mode, long press Play/Pause to enter/exit TWS function.
- Prev: In BT/USB/TF card modes, short press to play the previous track; in USB/TF card modes, long press to fast back.
- A/E: Short press to turn on/off the vocal cancel function. Accompany Mode can reduce or partially eliminate the vocals in the song. (Note: Vocal cancellation is effective only on audio tracks that contain vocals, and not available in AUX/TWS mode.)
- MIC PRIORITY: Short press to turn it on or off. When Mic Priority is on, the music volume lowers automatically and amplifies vocals.
- Mic Mode: Short press to switch between original sound mode and singer mode. The auto-tune function in this mode automatically adjusts the pitch of the audio signal to correct pitch problems in singing.
- LED MODE: Short press to switch the LED lights. Long press to turn the LED light on or off.
- REC: Long press to enter the recording mode; short press this button to play the recorded file. (Note: Insert a USB disk or TF card and connect a microphone before recording. Only microphone audio can be recorded; background music is not supported.)
- MIC-VOL: Microphone volume adjustment. Turn right to increase, left to decrease.
- ECHO: Microphone reverb effect adjustment. Turn right to increase, left to decrease.
- Bass: Adjusts the music bass. Turn right to increase, left to decrease.
- Treble: Adjusts the music treble. Turn right to increase, left to decrease.
- Vol: Controls the main music volume. Turn right to increase, left to decrease.
- CHARGING PORT: Plug one end of a Type-C charging cable into this port, and the other end into a standard 5V/2A USB-A power adapter or power bank. Please keep the device powered off while charging.
- TF CARD PORT: Insert a TF card with music files in MP3/AAC/WAV/FLAC/APE/WMA format, then it will automatically play the songs from the TF.
- USB PORT: Insert a USB card with music files in MP3/AAC/WAV/FLAC/APE/WMA format, then it will automatically play the songs from the USB.
- AUX: Connect with other audio devices through the AUX cable (3.5mm jack).
- MIC: Insert a 6.35mm wired microphone or the microphone with a 6.35mm receiver.
3.2. Remote Control Key Functions
- Mute: Short press to mute/unmute.
- Mode: Short press to switch different modes: USB mode, TF card mode, AUX mode, BT mode.
- BT Mode: Press to instantly enter BT mode from any operating state.
- Play/Pause: Press to switch between play and pause track.
- Next Track: Press to switch to the next track.
- Record: Short press to enter the recording mode, short press this key to stop and play the current recording. (Note: Insert a USB disk or TF card and connect a microphone before recording. Only microphone audio can be recorded; background music is not supported.)
- Number Keys (0-9): Use the number keys to quickly select a track. To play track 3, press "3"; the display will show "0003," and the track will start playing after 3 seconds. To play track 12, press "1" then "2" (the track must exist in the folder), and track 12 will play. Other tracks can be selected in the same way.
- Repeat: Press to switch between single track repeat and all tracks repeat. The default mode at startup is all tracks repeat.
- Volume +: Press to gradually increase the volume.
- Previous Track: Press to switch to the previous track.
- Volume -: Press to gradually decrease the volume.
- Record Playback: Press to automatically play recorded files from the TF card or USB drive. (This button only works if recorded files are available on the device.)
4. Setup
4.1. Charging the Speaker
Connect one end of the provided Type-C charging cable to the speaker's CHARGING PORT and the other end to a standard 5V/2A USB-A power adapter or power bank. Ensure the device is powered off during charging. The power delivered by the charger must be between minimum 2.5 Watts and maximum 15 Watts to achieve optimal charging speed.
CAUTION: Using fast-charging adapters (e.g., for smartphones) may damage the internal circuit and is not supported.
4.2. Bluetooth Pairing (BT Playback)
- Turn on the power switch of the speaker or repeatedly press the MODE button to enter BT mode.
- On your phone or Bluetooth-enabled device, open Bluetooth settings, search for "T39", and select it to connect.
- Once connected, open your music app on the phone and start playback.
Note: Ensure your phone's volume is turned on and set to an appropriate level.
4.3. TWS Pairing Method (True Wireless Stereo - for two T39-T speakers only)
To use TWS mode, you need two JYX T39-T speakers.
- Connect one of the speakers to your device via Bluetooth.
- Long press the MODE button on the *other* speaker. After hearing a prompt sound, that speaker will enter TWS mode. Both speakers will then play music simultaneously.
- To exit TWS mode, long press the MODE button on either speaker again.
5. Operation
5.1. Mode Switching
The speaker supports multiple input modes:
- TF Card Mode: Insert a TF card into the TF CARD PORT. The speaker will automatically switch to TF mode and play music files (MP3/AAC/WAV/FLAC/APE/WMA format).
- USB Mode: Insert a USB drive into the USB PORT. The speaker will automatically switch to USB mode and play music files (MP3/AAC/WAV/FLAC/APE/WMA format).
- AUX-IN Mode: Connect an audio cable (3.5mm jack) from your external device to the speaker's AUX port. Press the MODE button repeatedly until AUX-IN mode is selected.
- Bluetooth Mode: Refer to section 4.2 for pairing instructions.
In all modes (BT, USB, TF, AUX), you can short press the "Play/Pause" button to play/pause playback, and short press the "Prev" / "Next" buttons to switch between songs.
5.2. Microphone Usage and Karaoke Functions
The high-fidelity microphone offers clear sound pickup and noise reduction.
- Connecting Microphones: Insert a 6.35mm wired microphone or use the provided wireless microphones (which connect automatically).
- MIC-VOL: Adjust the microphone volume using the dedicated knob on the control panel.
- ECHO: Adjust the microphone reverb effect using the dedicated knob.
- MIC PRIORITY: Activate this function to automatically lower music volume and amplify vocals when speaking into the microphone.
- Mic Mode: Switch between original sound mode and singer mode. Singer mode includes an auto-tune function to correct vocal pitch.
- A/E (Vocal Cancel): Use this function to reduce or partially eliminate vocals from a song, making it suitable for karaoke. (Note: Only effective on audio tracks with vocals, not available in AUX/TWS mode).
Enjoy mobile KTV and karaoke at home with the JYX T39-T speaker.
5.3. Recording Function (REC)
This function is available in USB mode and TF mode.
- Before recording, insert a TF card or USB drive, and connect a wired or wireless microphone.
- Long press the REC button on the control panel to start recording.
- Short press the REC button to play the recorded file.
- After recording, turn off the microphone before exiting recording mode.
NOTE: Only microphone audio can be recorded; background music is not supported.
5.4. Lighting Function
Large area LED ambient lights add atmosphere to gatherings.
- Short press the LED button on the control panel to switch between different lighting modes.
- Long press the LED button to turn the LED lights on or off.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | JYX |
| Model | T39-T |
| Speaker Type | Portable |
| Communication | Bluetooth |
| Power Source | Battery |
| Battery | Yes |
| Input Power(W) | <25 W |
| Voltage Range | USB (5-20V DC) |
| Input/Output | AUX |
| Sound Mode | Stereo Sound Mode, Standard Mode |
| Audio Crossover | Full-Range |
| Number of Loudspeaker Enclosure | 1 |
| Channels | 2 (2.0) |
| Cabinet Material | Plastic |
| Operating Frequency Band | 2402-2480MHz |
| Maximum Radio-Frequency Power | 6 dBm |
| Package Dimensions (L x W x H) | 55cm x 29cm x 25cm |
| Package Weight | 5.65 kg |
| Waterproof | No |
| Voice Control | No |
| Support APP | No |
| Intelligent Personal Assistant | NONE |
| Origin | Mainland China |
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use for extended periods.
- Water Resistance: This speaker is NOT waterproof. Avoid exposure to water or high humidity.
8. Troubleshooting
- No Power: Ensure the speaker is fully charged. Check the charging cable and adapter connection.
- No Sound: Check the volume levels on both the speaker and your connected device. Ensure the correct input mode (BT, USB, TF, AUX) is selected.
- Bluetooth Disconnection: If Bluetooth disconnects, try re-pairing the device. Ensure there are no obstructions between the speaker and the Bluetooth device, and they are within range.
- Microphone Not Working: Ensure the microphone is properly connected and turned on. Check microphone volume (MIC-VOL) and echo settings.
- Recording Issues: Ensure a USB disk or TF card is inserted and has sufficient storage space. Remember that only microphone audio is recorded.
- TWS Pairing Failure: Ensure both speakers are in BT mode and only one is paired to a device before attempting TWS pairing.
9. User Tips
- For optimal sound quality, ensure the speaker is placed on a stable surface and not obstructed.
- Experiment with the various LED lighting modes to enhance the atmosphere for different occasions.
- When using the microphone, adjust the ECHO and MIC-VOL settings to find your preferred vocal effect.
10. Warranty and Support
For detailed warranty information and further support, please refer to the official user manual PDF available for download. This document contains comprehensive details regarding product guarantees and service.
You can access the user manual (PDF) at: JYX T39-T User Manual (PDF)
11. Safety Warnings and FCC Compliance
11.1. FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
11.2. Charging Safety
CAUTION: Using fast-charging adapters (e.g., for smartphones) may damage the internal circuit and is not supported. The power delivered by the charger must be between minimum 2.5 Watts and maximum 15 Watts to achieve the maximum charging speed.