WenQia 893QP

Contents

RF 433Mhz Wireless Timer Light Switch Instruction Manual

Model: 893QP

1. Introduction

Thank you for choosing the WenQia RF 433Mhz Wireless Timer Light Switch. This product is designed to provide convenient wireless control and timed operation for various electrical appliances. It features 10 distinct countdown modes, allowing you to automate the power-off function for lights, fans, and other devices. This manual will guide you through the installation, setup, and operation of your new timer light switch system.

2. Safety Information

Please read all safety warnings and instructions carefully before installation and use. Failure to do so may result in electric shock, fire, or serious injury.

  • Always ensure the power supply is OFF before performing any wiring or installation.
  • Wiring should only be performed by qualified personnel.
  • The input and output terminals of the receiver cannot be reversed. Incorrect wiring can damage the device or connected appliances.
  • Avoid installing the receiver near metal objects, large electronic devices, strong electromagnetic fields, or other sources of interference to ensure optimal signal reception.
  • For better signal reception, gently stretch the antenna on the receiver.

3. Package Contents

The product is available in various combinations. Please verify the contents against your purchase:

  • Wireless Timer Control Receiver (Mini Relay)
  • Remote Control Transmitter(s) (includes 23A 12V battery)
  • Screws for installation
  • Double-sided tape for mounting

An example of the product components:

WenQia RF 433Mhz Wireless Timer Light Switch components: remote control and mini relay receiver.

Image: Overview of the wireless timer control receiver and remote control.

4. Specifications

Wireless Timer Control Receiver (Mini Relay)

FeatureSpecification
Input VoltageAC 110V-250V
Max Current10A
Max Load2000W (AC110V-250V) / 2500W (AC110V~250V)
Quiescent Current<SMA
RF Frequency433.92MHz
RF Operating ModeASK superheterodyne wireless reception
Working Temperature-30°C to +80°C
Receiving Sensitivity>-97dbm
Wired Connection WayFixed Wiring Pillar (L/N Input, L/N Output)
Dimensions28mm x 47mm x 22mm
MaterialPlastic
ColorWhite (Outside Shell)

Image: Receiver dimensions (28x47x22mm) and power specifications.

Dimensions of the wireless timer control receiver: 28x47x22mm, AC110V~250V, 2500W.

Remote Control Transmitter

FeatureSpecification
RF Frequency433MHz
Support Encoding1527 Leaning code
Remote DistanceUp to 50 meters (theoretical distance)
Battery Type23A 12V (included)
Dimensions110mm x 38.1mm x 15mm

Image: Remote control dimensions (110x38.1x15mm) and battery type (23A 12V).

Dimensions of the remote control transmitter: 110mm x 38.1mm x 15mm, with a 23A 12V battery compartment.

5. Setup

5.1 Wiring Diagram

The receiver requires a Live (L) and Neutral (N) wire for both input and output. Ensure correct polarity and secure connections. The input terminal and output terminal cannot be reversed.

Simple wiring diagram for the RF Light Switch receiver. Input AC100~250V connects to L and N terminals. Output AC100~250V connects to L and N terminals of the light or fan.

Image: Wiring diagram showing Live (L) and Neutral (N) connections for input and output to a light or fan.

5.2 Installation Examples

The compact size of the receiver allows for discreet installation in various locations, such as inside ceiling light fixtures or behind wall switches.

Installation examples showing the mini receiver being installed inside a ceiling light fixture and behind a wall switch, with a temperature range of -20 to 70 degrees Celsius.

Image: Examples of receiver installation in a ceiling light and behind a wall switch.

5.3 Pairing the Remote Control

To establish communication between the remote control and the receiver, follow these steps:

  1. Quickly press the learning button on the receiver 2 times. The indicator light on the receiver will turn on.
  2. Wait for approximately 1 second.
  3. Press the "ON" button on the remote control 1 time. The indicator light on the receiver will flash, indicating successful pairing.

You can pair multiple remote controls to one receiver, or one remote control to multiple receivers.

A video demonstration of the pairing process is available:

Video: Demonstration of signal pairing, timer function, switching channels, and resetting the device.

5.4 Resetting the Receiver

To clear all paired remote controls from the receiver's memory:

  1. Press the learning button on the receiver 8 times.
  2. All previously paired remote controls will be cleared. You will need to re-pair any remote controls you wish to use.

6. Operating Instructions

6.1 Timer Countdown Modes

The remote control features 11 channels (00-10) for various countdown functions:

  • 00: No limited (continuous ON)
  • 01: 5 minutes
  • 02: 10 minutes
  • 03: 15 minutes
  • 04: 30 minutes
  • 05: 45 minutes
  • 06: 60 minutes
  • 07: 90 minutes
  • 08: 120 minutes
  • 09: 240 minutes
  • 10: 480 minutes

To use a countdown mode:

  1. Use the '+01' or '-01' buttons on the remote to select the desired channel (e.g., '04' for 30 minutes). The selected channel number will be displayed on the remote's screen.
  2. Press the 'ON' button to turn on the connected appliance. The appliance will automatically turn off after the set countdown time.
  3. Press the 'OFF' button to manually turn off the appliance at any time.
Diagram showing the 10 countdown timer modes available on the remote control, ranging from 5 minutes to 480 minutes, plus an unlimited mode.

Image: Visual representation of the 10 countdown timer modes.

Example of using the remote control to set a 30-minute auto-off timer for a light. Select channel 04 and press ON.

Image: Example of setting a 30-minute auto-off timer.

6.2 Switching Channels

To change the active channel on the remote control:

  • Press the '+01' button to increase the channel number.
  • Press the '-01' button to decrease the channel number.

The current channel number will be displayed on the remote's screen.

7. Product Application Area

This versatile wireless timer control system can be used in a wide range of environments and for various applications, including:

  • Residential: Homes, apartments, for controlling lights, fans, water heaters, fish tanks, DIY home electrical equipment.
  • Commercial: Offices, supermarkets, factories, farms, laboratories.
  • Specific Devices: Electric curtains, water pumps, LED lights, bulbs, ventilation devices, humidifiers, microwaves, coffee machines.
  • Assistance: Remote control for taking care of the elderly or children.
Diagram showing various applications for the wireless timer control receiver, including water heaters, fans, fish tanks, and lamps.

Image: Examples of appliances and environments where the product can be used.

8. Maintenance

  • Keep the device clean and dry. Wipe with a soft, dry cloth.
  • Do not expose the device to excessive moisture or extreme temperatures.
  • If the remote control's range decreases or it becomes unresponsive, replace the 23A 12V battery.

9. Troubleshooting

  • Device not responding to remote: Ensure the receiver is powered on and correctly wired. Check the remote control battery. Re-pair the remote control with the receiver following the pairing instructions.
  • Poor signal reception: Ensure the receiver's antenna is slightly stretched. Relocate the receiver or remote control away from large metal objects, electronic devices, or sources of strong electromagnetic interference.
  • Appliance not turning off after timer: Verify that the correct countdown channel was selected and the 'ON' button was pressed after selection. If the issue persists, try resetting the receiver and re-pairing.

10. Warranty and Support

This product comes with a 1-year warranty from the date of purchase.

For technical support or inquiries, please contact the manufacturer:

  • Manufacturer: Huizhou Wenqiao Electronic Technology Co., Ltd.
  • Address: Room 03, 12th Floor, Building T19, East Coast Garden, Fangzhilonghuwan, No. 27, Sanhuan South Road, Huicheng District, Huizhou City, Guangdong Province, China 516001
  • WhatsApp: +86 181 3880 5771 / +86 158 7521 8992
  • Email: dieseelectronic@163.com

A detailed user manual is available in PDF format for further reference. You can access it here.

The product is certified with RoHS and CE standards, ensuring quality and safety.

Quality assurance certificates for RoHS and CE standards.

Image: Quality Assurance Certificates (RoHS/CE).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.