360 Degree Rotating Car Holder 360 Degree Rotating Car Holder

Contents

360° Rotating Car Holder Instruction Manual

Model: 360 Degree Rotating Car Holder

1. Introduction

This manual provides instructions for the installation, operation, and maintenance of your 360° Rotating Car Holder. Please read this manual thoroughly before use to ensure proper functionality and safety. This versatile holder is designed to securely mount various devices in your vehicle.

2. Features

  • Unique design and high quality construction.
  • Adjustable neck with 360 degrees rotating holder for optimal viewing angles.
  • Strong suction cup design allows attachment to a wide range of smooth surfaces.
  • Quick release button for easy installation and removal of the holder.
  • Suitable for GPS devices, navigators, tachographs, DC cameras, DVRs, motion DVs, fixed cameras, and directional antennas.

3. Package Contents

The package includes the following components:

  • 1 x Car Holder (consisting of suction cup base, adjustable neck, and device attachment)
Components of the Car Holder: Suction cup base, adjustable neck, and device attachment.
Figure 1: Components of the Car Holder (disassembled view).
Exploded view of the holder components, showing how they fit together.
Figure 2: Exploded view of the holder components.

4. Specifications

Attribute Detail
Material PLASTICS (ABS)
Color Black
Placement Car Console (or other smooth surfaces)
Rotation 360 degrees
Weight (approx.) 0.03 kg

5. Setup Instructions

  1. Unpack Components: Carefully remove all parts from the packaging. You should have the suction cup base, the adjustable neck, and the device attachment.
  2. Assemble Neck to Base: Align the adjustable neck with the opening on the suction cup base. Screw the collar securely to connect these two parts.
  3. Attach Device Mount: Secure the device attachment piece to the adjustable neck. Ensure it is firmly seated and locked into place if applicable.
  4. Final Check: Before mounting, ensure all connections are tight and the holder feels stable.
Assembled Car Holder with a device (HUD/DVR) mounted, showing typical in-car placement.
Figure 3: Assembled Car Holder ready for use.

6. Operating Instructions

6.1 Mounting the Holder

  1. Clean Surface: Choose a clean, smooth, and flat surface in your car (e.g., windshield, dashboard). Ensure it is free of dust, dirt, and grease for optimal suction.
  2. Position Suction Cup: Press the suction cup firmly against the chosen surface.
  3. Secure with Lever: Flip the lever on the side of the suction cup base downwards to create a vacuum seal. This will firmly secure the holder in place.
Underside view of the suction cup base, showing the lever mechanism for secure attachment.
Figure 4: Suction cup base with securing lever.

6.2 Attaching Your Device

  • Gently slide your GPS, DVR, or other compatible device onto the attachment point of the holder until it clicks securely into place. Ensure it is stable before driving.
Front view of the assembled car holder.
Figure 5: Front view of the assembled car holder.

6.3 Adjusting the Viewing Angle

  • The holder features an adjustable neck and a 360-degree rotating joint. Loosen the adjustment knob slightly to position your device to the desired viewing angle.
  • Once the desired angle is achieved, tighten the knob to lock the position.
Diagram illustrating the 360-degree rotation capability of the holder's adjustable neck.
Figure 6: 360-degree rotation capability.
Side view of the assembled holder, highlighting the adjustable angle.
Figure 7: Side view showing adjustable angle.

6.4 Removing Your Device and Holder

  • To Remove Device: Press the quick-release button on your device's attachment (if available) or gently pull the device off the holder.
  • To Remove Holder: Flip the lever on the suction cup base upwards to release the vacuum seal. Carefully lift the suction cup from the surface.

7. Maintenance

  • Cleaning: Regularly clean the suction cup and the mounting surface with a damp, lint-free cloth to ensure optimal adhesion.
  • Avoid Extreme Temperatures: Do not expose the holder to extreme heat or cold for prolonged periods, as this may affect the material and suction performance.
  • Chemicals: Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic material.

8. Troubleshooting

Problem: The holder does not stick firmly to the surface.
Solution: Ensure the mounting surface is completely clean, smooth, and dry. Moisten the suction cup slightly with water before pressing it firmly against the surface and engaging the lever. Avoid textured or porous surfaces.
Problem: The device feels loose or wobbly in the holder.
Solution: Verify that your device is correctly seated and fully engaged with the attachment mechanism. Check that the adjustable neck's knob is tightened sufficiently to prevent movement.

9. User Tips

  • For the strongest and most reliable suction, clean the mounting surface with an alcohol wipe before initial installation.
  • If the holder is left mounted for extended periods, occasionally release and re-engage the suction cup lever to refresh the vacuum seal and ensure continued strong adhesion.
  • When removing the holder, always release the suction lever first to prevent damage to the suction cup or the mounting surface.

10. Warranty and Support

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, support, or to make a claim, please contact your retailer or the point of purchase. Keep your proof of purchase for warranty purposes.

11. Additional Resources

A more detailed user manual, including additional diagrams and information, is available in PDF format. Please refer to the seller's product page or contact customer support for access to this document.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.