1. Introduction
The MCHOSE A7 V2 Pro Ultra is an advanced lightweight tri-mode wireless gaming mouse designed for both gaming and office use. It features a high-performance PAW3950 TI sensor, up to 42000 DPI, 8K polling rate capability, and a durable, ergonomic design.
2. Package Contents
Upon unboxing your MCHOSE A7 V2 Pro Ultra mouse, you should find the following items:
- MCHOSE A7 V2 Ultra+ Wireless Gaming Mouse
- Magnetic Charging Dock with Receiver
- Charging/Data Cable (Type-C)
- Anti-slip Sticker
- Warranty Card
- Function Guide
- (For some models) 8K Dongle (if purchased separately or included with specific versions)
3. Setup and Connection
3.1. Wired Connection
- Connect the provided Type-C charging/data cable to the mouse.
- Plug the other end of the cable into an available USB port on your computer.
- The mouse will function in wired mode and charge simultaneously.
3.2. 2.4GHz Wireless Connection
- Locate the 2.4Ghz USB receiver (often integrated into the magnetic charging dock or a separate dongle).
- Plug the USB receiver into an available USB port on your computer. For optimal performance and to avoid stuttering, it is recommended to use a USB 3.0 port.
- Ensure the mouse's mode switch (usually on the bottom) is set to '2.4G'.
- The indicator light on the mouse will show green when successfully paired. Keep the mouse and receiver within 30cm for best signal.
3.3. Bluetooth Connection
- Ensure the mouse's mode switch is set to 'BT' (Bluetooth).
- On your computer or device, go to Bluetooth settings and search for new devices.
- Select the MCHOSE A7 V2 mouse from the list of available devices to pair.
4. Operation
4.1. DPI Adjustment
The mouse features multiple DPI levels, indicated by the color of the DPI indicator light:
- Red Light: 400 DPI
- Green Light: 800 DPI
- Blue Light: 1600 DPI
- Cyan Light: 3200 DPI
- Yellow Light: 6400 DPI
- Purple Light: 26000 DPI (or 42000 DPI for A7 V2 Ultra+ models)
Press the dedicated DPI button (usually located on the top or bottom of the mouse) to cycle through the DPI settings.
4.2. Indicator Lights
The mouse features an indicator light to show its status:
- Green Light: Indicates 2.4G pairing mode.
- Flashing Red Light: Indicates low battery.
- Solid Red Light: Indicates the mouse is currently charging.
- Solid Green Light: Indicates the mouse is fully charged.
4.3. M HUB Driver Software
The MCHOSE A7 V2 Pro Ultra mouse supports custom driver software (M HUB) for advanced configuration, including:
- Sensor Rotation
- Ripple Control
- Straight Line Correction
- Battery Level Display
- Button remapping and macro settings
You can access the M HUB driver via:
- Web Version: https://www.mchose.com.cn
- Client Version: https://www.maicong.cn/support/hub (Supports Windows 10 and above operating systems only.)
4.4. 8K Polling Rate (Advanced Feature)
To fully utilize the 8K polling rate, ensure your computer meets the following recommended specifications:
| Component | Intel Platform | AMD Platform |
|---|---|---|
| CPU | i7 9700k and above | AMD 3700X and above |
| Video Card | NVIDIA RTX 2060 and above | AMD RX5700 XT and above |
| Memory | 16GB and above | 16GB and above |
| Monitor | Screen refresh rate above 240Hz | |
Note: A7, A7 Pro, A7 Pro V2, and A7 V2 Pro+ models require a separate purchase of an 8K custom receiver to enable 8K polling rate functionality.
5. Charging and Battery
The MCHOSE A7 V2 Pro Ultra mouse is equipped with a 500mAh rechargeable battery and supports magnetic wireless charging via its dedicated dock.
5.1. Charging Instructions
- Connect the magnetic charging dock to your computer via the Type-C cable.
- Place the mouse onto the magnetic charging dock. The indicator light will turn solid red during charging and solid green when fully charged.
- Alternatively, you can charge the mouse directly using the Type-C cable connected to your computer.
5.2. Important Charging Notes
- It is recommended to charge the mouse using your computer's USB port.
- Do not use low-quality or non-standard power adapters for charging.
- Avoid using over-voltage or over-current power adapters.
- Keep the mouse away from commercial equipment during charging.
- If the mouse will not be used for an extended period, turn off its power switch to preserve battery life.
6. Maintenance
- Keep the mouse clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Store the mouse in a dry environment, away from extreme temperatures and direct sunlight.
- Ensure the PTFE feet are clean and free of debris for smooth gliding.
- When not in use, especially for long periods, turn off the mouse to conserve battery and prolong its lifespan.
7. Troubleshooting
- Mouse stuttering or lag: If experiencing stuttering with the 2.4GHz dongle, try plugging it into a USB 3.0 port on your computer. Ensure the mouse and receiver are within close proximity (under 30cm) and away from other wireless interference sources.
- Connection issues: Re-pair the mouse with its receiver or Bluetooth. Ensure the mode switch on the mouse is set correctly (2.4G or BT).
- Charging issues: Verify the charging cable and dock are properly connected. Ensure you are using a suitable power source (computer USB port recommended). Check the indicator light for charging status.
- FCC Interference: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. If interference occurs, try reorienting the receiving antenna, increasing the separation between equipment and receiver, or connecting the equipment into an outlet on a circuit different from that to which the receiver is connected.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | MCHOSE |
| Model Number | Mchose A7/A7 Pro/A7 V2 Pro/A7 V2 Pro+/A7 V2 Ultra+ |
| Type | 2.4Ghz Wireless (Tri-Mode: Type-C Cable / 2.4G Hz / Bluetooth) |
| Operation Mode | Opto-electronic |
| Number of Buttons | 5 |
| Number of Rollers | 1 pcs (TTC Gold Wheel Encoder) |
| Max DPI | 42000 |
| IPS (Tracking Rate) | 750 |
| Acceleration | 50 G |
| Power Type | Rechargeable |
| Battery Capacity | 500mAh (A7 V2 Pro/Ultra), 300mAh (A7/A7 Pro) |
| Battery Included | Yes |
| Interface Type | USB (Type-C) |
| Origin | Mainland China |
| Package | Yes |
| Polling Rate | Wired 1K + Wireless 8K (A7 V2 Pro, A7 V2 Ultra), Wired 8K + Nano Wireless 8K (A7 V2 Ultra) |
| Chipset | Realtek Main Control Chip |
| Micro Switch | Omron Mechanical Switch (100 Million Clicks) |
| Sensor | PAW3950 TI Custom Flagship Sensor |
| Surface Coating | Super Glide Glass Coating (A7 V2 Pro/A7 V2 Ultra), Nano Ice Coating (A7/A7 Pro/A7 Ultra) |
| Transmission Technology | MCHOSE TOPSPEED Wireless Technology |
| Drivers | Dual-Driver Support: M HUB (Client & Web Version) |
| Receiver | 1K Nano Receiver, 8K Nano Receiver |
| Size | Approx. 125.8mm × 63.2mm × 39.8mm |
| Weight | Approx. 56g (A7/A7 Pro/A7 Ultra), Approx. 59g (A7 V2 Pro/A7 V2 Ultra) |
9. User Tips
- For optimal performance and to prevent potential stuttering, always connect the 2.4GHz wireless dongle to a USB 3.0 port on your computer.
- Regularly check for driver updates via the M HUB software to ensure you have the latest features and performance enhancements.
- Experiment with different DPI settings and M HUB customizations to find what best suits your gaming or work style.
10. Warranty and Support
Your MCHOSE A7 V2 Pro Ultra mouse comes with a warranty. Please refer to the included Warranty Card in your package for specific terms and conditions.
For further support, driver downloads, or to view the full user manual in PDF format, please visit the official MCHOSE website: https://www.mchose.com.cn
A PDF version of the user manual is also available for download: MCHOSE A7 Series User Manual (PDF)