YQCHEZI S1

Contents

YQCHEZI Solar Street Light User Manual

Model: S1

1. Introduction

Thank you for choosing the YQCHEZI Solar Street Light. This manual provides essential information for the safe and efficient use of your new solar light. Please read it carefully before installation and operation, and keep it for future reference.

This solar street light features an integrated wide-angle design for optimal illumination with a double-sided multi-array design, offering enhanced brightness. It is equipped with high-brightness and energy-saving LED beads and utilizes polycrystalline A-grade solar panels for efficient charging, even on cloudy days.

An intelligent radar sensor chip enables automatic operation, offering three modes: Dusk to Dawn, Motion Sensor, and Remote Control. It also includes adjustable brightness settings and a countdown timer for versatile usage. Constructed with high-quality ABS and a metal bracket, it boasts an IP65 waterproof rating, ensuring durability in various outdoor environments.

2. Safety Warnings

Please read and adhere to the following safety warnings to prevent injury or damage:

  • It is strictly prohibited to replace or disassemble the batteries without authorization.
  • Do not expose batteries to fire or high-temperature environments.
  • Waste electrical products should not be disposed of with household waste. Please recycle where appropriate facilities exist.

3. Package Contents

Please check the package to ensure all components are present and undamaged:

  • Solar Street Light Unit (with integrated solar panel)
  • Mounting Arm/Bracket
  • Remote Control
  • Installation Screws and Anchors
  • User Manual (this document)

4. Specifications

Feature Specification
Brand Name YQCHEZI
Model ID S1
Output Voltage 3.2V
Protection Level IP65
Battery Capacity 6000mAh (Lithium ion battery 26650)
Power Source SOLAR
Light Source LED bulbs
Dimmable Yes
Body Material ABS
Charging Time 6-8 hours (full sunlight)
Working Time 12+ hours
Style Modern Style
Installation Method Assembly (Wall or Pole Mounted)
Pole Diameter Range 1.5 IN to 2.5 IN (for pole mounting)
Dimensions (approx.)
  • Small Model (e.g., 7000LM): 14.5cm (W) x 26.5cm (H)
  • Medium Model (e.g., 50000LM): 14.8cm (W) x 37cm (H)
  • Large Model (e.g., 200000LM): 21.5cm (W) x 44cm (H)

Note: Dimensions and lumen output may vary slightly between different product configurations.

5. Setup and Installation

The solar street light is designed for easy assembly and can be mounted on a wall or pole. No complex wiring is required.

5.1 Initial Charge and Test

  • Upon receiving the product, due to potential power loss during long-distance transportation, the lamp may not turn on immediately due to insufficient power.
  • Before final installation, connect the lamp correctly and place it under direct sunlight for 6-8 hours to fully charge the battery.
  • Test the lamp in an external area with sufficient lighting to confirm the indicator light is on and the lamp is charging normally.

5.2 Mounting Options

The light offers two primary mounting options:

Diagram showing wall-mounted and pole-mounted installation options for the solar light.
Figure 1: Wall Mounted and Pole Mounted Installation Options

For pole mounting, ensure the pole diameter is between 1.5 inches and 2.5 inches.

5.3 Installation Steps

  1. Connect the lamp unit with the support arm.
  2. Pass the lamp wire through the support arm hole.
  3. Fix the solar panel (if separate) to the bracket using screw 1.
  4. Fix the assembled bracket to the support arm using screw 2.
  5. Mount the entire assembly to your desired location (wall or pole) using the provided installation screws and anchors.

Ensure the solar panel is installed in a sunny area where it can receive optimal direct sunlight. The orientation and tilt angle of the solar panel can be adjusted for maximum efficiency.

6. Operating Instructions

After proper installation and initial charging, the lamps will operate automatically.

6.1 Automatic Operation

  • The light will automatically turn on at dusk.
  • The light will automatically turn off at dawn.

6.2 Remote Control Functions

The included remote control allows for manual operation and mode selection.

Overview of the solar street light with remote control and motion sensor details.
Figure 2: Solar Street Light with Remote Control

Brightness Adjustment

Use the remote to change the brightness from 25% to 100%.

Timing Mode

The lamp has a timer function. After the lamp automatically turns on at night:

  • Press the 3H, 5H, or 8H button on the remote to set the timer for 3, 5, or 8 hours, respectively. The light will automatically turn off after the set duration.
  • To keep the lamp on all night, press the AUTO button.
  • The timer has a memory function, so you do not need to set it again the next day unless you wish to change the setting.

Motion Sensing Modes (Radar Mode)

The intelligent radar sensor chip provides automatic motion detection functionality.

Diagram illustrating motion sensing modes and timing mode for the solar light.
Figure 3: Motion Sensing and Timing Modes
  • Motion Sensor Mode 1: The light maintains 10% brightness when no motion is detected and increases to 100% brightness upon sensing motion.
  • Motion Sensor Mode 2: The light remains off when no motion is detected and turns on to 100% brightness upon sensing motion.
  • Timing Mode with Sensor: You can set the light to stay on steadily for 3 or 4 hours, after which it will switch to Motion Sensor Mode 1.

7. Maintenance

  • To ensure optimal charging efficiency, it is recommended to clean any dust or debris from the solar panel surface every 5 months. Use a soft cloth and mild cleaning solution if necessary.
  • Regularly check the mounting hardware to ensure the light remains securely fastened.

8. Troubleshooting

8.1 Light Does Not Turn On

  • Insufficient Charge: The lamp may have insufficient power due to long-distance transportation or lack of initial charge. Ensure the lamp is connected correctly and placed under direct sunlight for 6-8 hours to fully charge.
  • Solar Panel Placement: Verify that the solar panel is installed in a sunny area and is not obstructed by shadows from buildings, trees, or other objects.
  • Connection Issues: Check all connections, especially the connection line, to ensure they are secure and the indicator light is on, indicating normal charging.

8.2 Light Does Not Stay On All Night

  • Insufficient Charging: Ensure the solar panel receives adequate direct sunlight for 6-8 hours daily. Cloudy weather can reduce charging efficiency.
  • Timer Setting: Check if a timer (3H, 5H, or 8H) is activated. If you want the light to stay on all night, press the AUTO button on the remote control.

8.3 Motion Sensor Not Working Correctly

  • Mode Selection: Ensure the correct motion sensor mode (Mode 1 or Mode 2) is selected via the remote control.
  • Obstructions: Clear any obstructions that might block the sensor's field of view.

9. User Tips

  • Pre-Installation Test: Before permanently mounting the light, perform an initial charge and test its functionality in your desired location to ensure it meets your expectations.
  • Optimal Solar Exposure: Always prioritize installing the solar panel in an area that receives maximum direct sunlight throughout the day for best performance.

10. Warranty and Support

This YQCHEZI Solar Street Light comes with a 2-year warranty from the date of purchase, covering manufacturing defects under normal use.

For further assistance or detailed diagrams, you may refer to the official user manual PDF: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.