AULA SC680 Wireless Gaming Mouse User Manual

Introduction

The AULA SC680 is a high-performance tri-mode wireless gaming mouse designed for versatility and precision. It offers three connection methods: 2.4G wireless, Bluetooth 5.2, and USB-C wired, allowing seamless switching between various devices such as PCs, laptops, and Macs. Featuring a PAW3395 sensor, it delivers up to 26000 DPI, 650 IPS, and 50G acceleration for ultra-precise tracking. The mouse is equipped with durable Huanuo Pink Dot microswitches rated for 80 million clicks and a 500mAh rechargeable battery for extended use. Its lightweight and ergonomic design ensures comfort during long gaming sessions or work.

AULA SC680 Professional E-Sports Mouse promotional video, showcasing its features and design.

Package Contents

• AULA SC680 Wireless Gaming Mouse
• USB-C Charging Cable
• 2.4G Wireless Receiver
• Anti-slip Stickers
• Extra Feet Pads
• User Manual (PDF available online)

Physical Overview

Diagram of the mouse with labels for Left Button, Right Button, Scroll Wheel, Forward, Backward, Type-C Interface, DPI Button, 2.4G/OFF/BT switch, and 2.4G Receiver.

1. Left button
2. Right button
3. Scroll wheel
4. Forward button
5. Back button
6. Indicator
7. Receiver storage
8. Type-C interface
9. DPI Button (Short press: Switch DPI; Long press: Pairing button)
10. 2.4G mode switch
11. OFF switch
12. BT1/BT2 switch

Setup

Charging the Mouse

Before first use, it is recommended to fully charge the mouse. Connect the USB-C charging cable to the mouse's Type-C interface (8) and the other end to a computer's USB port or a standard USB charger.

• Charging Indicator: The indicator light (6) will show a red breathing effect while charging. It will turn off when fully charged.
• Low Voltage Alarm: The mouse indicator will flash red to remind you to charge.

Bottom of the mouse with the 2.4G/OFF/BT switch, DPI button, and Type-C port, indicating tri-mode connectivity and a 500mAh lithium battery.

Connection Methods

2.4G Wireless Mode

1. Locate the 2.4G wireless receiver.
2. Slide the switch on the bottom of the mouse (10) to the "2.4G" position.
3. Plug the USB receiver into an available USB port on your computer. The mouse should be ready for use immediately (plug-and-play).
4. Pairing (if needed): If the mouse does not connect automatically, long press the DPI button (9) for 5 seconds to enter pairing mode. The mouse's purple light will flash. Then, insert the receiver, and its purple light will stay on to indicate successful pairing. The effective pairing distance is within 50cm.

Close-up of the 8K receiver connected to a USB port, highlighting 8x faster polling rate, better accuracy, and lower latency.

Bluetooth (BT) Mode

1. Slide the switch on the bottom of the mouse (12) to the "BT1" or "BT2" position.
2. Pairing: Long press the DPI button (9) for 5 seconds to enter broadcasting state. The scroll wheel's blue light will flash.
3. On your computer or device, search for Bluetooth devices and select "AULA-SC680-1" (for BT1) or "AULA-SC680-2" (for BT2).
4. Once paired, the blue light will remain steadily on. The effective pairing distance is within 50cm.
5. Switching BT Channels: To switch to BT2, long press buttons (3) + (5) for 5 seconds. To switch back to BT1, long press buttons (3) + (4) for 5 seconds.
6. Re-pairing: If the BT device is deleted from your computer, you will need to re-pair the mouse following these steps.

USB-C Wired Mode

Connect the USB-C charging cable to the mouse's Type-C interface (8) and the other end to your computer. The mouse will automatically switch to wired mode.

Operating Instructions

Combined Key Functions

• Switch Lighting Mode: Short press the button combination (2) + (4) + (5) to cycle through lighting modes. Available modes include: Off, Always Bright, Breathing, Neon, Cycle Breathing, Always Bright DPI (default), and other light effects.
• Customize Lighting: Use the mouse driver software to customize color, speed, and brightness of the lighting effects.
• Restore Default Settings: Press the button combination (1) + (2) + (5) to restore the mouse to its factory default settings. This action does not require re-coding after connecting 2.4G or BT devices.

DPI Adjustment

The mouse supports five levels of DPI adjustment, with a maximum of 26000 DPI configurable via the driver. Short press the DPI button (9) to cycle through preset DPI levels.

Image showing five-speed DPI free switching with a bottom DPI button for one-touch switching, supporting up to 26000 DPI.

Sleep Mode

To conserve power, the mouse enters various sleep states:

• If inactive for 30 seconds, the lighting will turn off automatically.
• After 30 seconds of inactivity, it enters 1-level hibernation.
• After 10 minutes of inactivity, it enters deep hibernation.
• To wake the mouse from hibernation, press any button or move the mouse.
• Unplugging the receiver or turning off the computer will also cause the mouse to enter deep sleep quickly.

Maintenance

Cleaning

To clean the mouse, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the surface or internal components.

Battery Care

• It is recommended to charge the mouse using a computer's USB port.
• Do not use fast-charging mobile phone chargers.
• Avoid using inferior or non-standard power adapters.
• Do not use over-voltage or over-current power adapters.
• Keep the mouse away from high-temperature equipment while charging.
• Turn off the power switch when the mouse is not in use for an extended period to prolong battery life.

Troubleshooting

Mouse Not Responding

• Ensure the mouse is charged. Check the charging indicator.
• Verify the connection mode (2.4G, BT, or Wired) is correctly selected on the bottom switch.
• For 2.4G/BT modes, try re-pairing the mouse with your device as described in the Setup section.
• For wired mode, ensure the USB-C cable is securely connected to both the mouse and the computer.

Lighting Issues

• Check the current lighting mode using the (2) + (4) + (5) button combination.
• Ensure the mouse is not in sleep mode, which turns off the lights.
• If using the driver, verify that lighting settings are configured correctly.

DPI Adjustment Not Working

• Ensure you are pressing the correct DPI button (9).
• If using custom DPI settings, verify they are correctly configured in the driver software.

Specifications

Detailed product parameters for the AULA SC680 mouse.

User Tips

• 8K Receiver Size: Be aware that the included 8K receiver is larger than the internal storage compartment within the mouse. The internal compartment is designed for a smaller 1K receiver (not included). This means the 8K receiver needs to be carried separately, which may affect portability if you rely on the internal storage.
• Driver Customization: For full customization of DPI, button functions, macro settings, and polling rate, install the official driver software. This is typically compatible with Windows systems.

Warranty and Support

For warranty information, technical support, or further inquiries, please refer to the official AULA website or contact the manufacturer directly.

• Manufacturer: Dongguan Suoai Electronics CO.,LTD
• Website: www.aulastar.com
• Address: SOAI Industry Park, Huayu Street Changlong Village, Huangjiang Town, Dongguan City, Guangdong Province, Mainland China

A comprehensive user manual in PDF format is available for download from the product page or manufacturer's website for more detailed instructions and information.