1. Introduction
Thank you for choosing the TAPNM LED Bumper Reflector Lights. This product is designed to enhance the rear visibility and aesthetics of your 2017-2021 Honda Civic Hatchback, Type-R, or SI Sedan. These lights function as tail running lights, brake lights, and dynamic sequential turn signals, providing improved safety and a modern look.
2. Safety Information
- Always disconnect the vehicle's battery before performing any electrical work to prevent short circuits and electrical shock.
- Ensure all wiring connections are secure and properly insulated to prevent moisture ingress and corrosion.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and could lead to malfunction or damage.
- If you are unsure about any installation steps, seek professional assistance from a qualified automotive technician.
- Keep the product away from extreme temperatures and harsh chemicals.
3. Package Contents
The package includes the following items:
- 2 x LED Bumper Reflector Lights (Left and Right)
- Integrated Wiring Harnesses
Image: Contents of the package, showing the two LED bumper reflector lights with their wiring.
4. Specifications
| Feature | Specification |
|---|---|
| Type | LED Rear Bumper Reflector Brake Light |
| Voltage | 12V |
| Light Color | Red |
| Lens Color | Red |
| Lifespan | 50,000+ hours |
| Material | ABS + LED |
| Item Weight | 0.12 kg |
| Package Dimensions (L x W x H) | 20 cm x 10 cm x 9 cm |
| Lighting Functions | Tail Running Light (Dim Red), Brake Light (High Red), Sequential Turn Signal Light |
| Special Features | 3D Red Reflective Lens, Shake-proof, Dustproof, Waterproof, Corrosion Resistant, Built-in Overheating Protection |
Image: Product dimensions, showing a height of 0.78 inches and a length of 7.83 inches.
5. Fitment and Compatibility
These LED Bumper Reflector Lights are specifically designed for the following models:
- 2017-2021 Honda Civic EX Hatchback 4-Door
- 2017-2021 Honda Civic EX-L Hatchback 4-Door
- 2017-2021 Honda Civic LX Hatchback 4-Door
- 2017-2021 Honda Civic Si Sedan 4-Door
- 2017-2021 Honda Civic Sport Hatchback 4-Door
- 2017-2021 Honda Civic Sport Touring Hatchback 4-Door
- 2017-2021 Honda Civic Type R Hatchback 4-Door
- 2017-2021 Honda Civic Type R
IMPORTANT: These lights are NOT compatible with standard coupe or sedan models that are not listed above. Please verify your vehicle's model before installation.
Image: Visual guide for vehicle compatibility, indicating which Honda Civic models are suitable for these lights.
6. Installation and Setup
Follow these steps for proper installation:
- Preparation: Ensure your vehicle is turned off and the battery is disconnected. Gather necessary tools (e.g., screwdrivers, wire strippers, electrical tape/heat shrink tubing).
- Access Rear Bumper: Carefully remove the existing bumper reflectors or access the area where the new lights will be installed. This may involve removing some clips or screws.
- Wiring Connection: Identify the corresponding wires on your vehicle's tail light harness. Refer to the wiring diagram below for correct connections.
- Green wire — Connect to ACC Positive (+) (Driving Light)
- Black wire — Connect to Negative (- / Ground)
- Red wire — Connect to Brake Light Positive (+)
- Yellow wire — Connect to Turn Signal Light Positive (+)
- Secure Connections: After connecting, ensure all wires are securely joined and insulated using electrical tape or heat shrink tubing to prevent short circuits and protect against environmental elements.
- Mounting: Install the new LED bumper reflector lights into their designated slots on the rear bumper. Ensure they are firmly seated and secured.
- Test: Reconnect the vehicle's battery. Test all light functions (tail running, brake, and turn signals) to ensure they are working correctly before fully reassembling the bumper area.
- Final Assembly: Reassemble any removed bumper components.
Image: Detailed wiring diagram showing the function of each numbered wire.
Image: Installation guide illustrating the color-coded wires and their respective connections for driving light, turn signal, brake light, and negative.
7. Operating Instructions
The LED Bumper Reflector Lights offer three distinct lighting functions:
- Tail Running Light (Dim Red): When your vehicle's headlights or parking lights are on, the bumper lights will illuminate in a dim red, providing enhanced rear visibility.
- Brake Light (High Red): When the brake pedal is pressed, the bumper lights will illuminate in a bright red, signaling braking action to following vehicles.
- Sequential Turn Signal Light: When the turn signal is activated, the lights will illuminate in a dynamic, flowing sequence, clearly indicating your intended turn direction.
Image: Visual representation of the lights operating as brake highlight, sequential turn signal, and driving low light.
8. Maintenance
- Cleaning: Clean the surface of the lights regularly with a soft cloth and mild automotive cleaner. Avoid abrasive materials or harsh chemicals that could damage the lens.
- Inspection: Periodically check the lights for any signs of damage, loose connections, or moisture ingress. Ensure the wiring remains secure and protected.
- Functionality Check: Regularly test all lighting functions (tail, brake, turn signal) to ensure they are operating correctly.
9. Troubleshooting
- Lights Not Illuminating:
- Check all wiring connections for proper contact and ensure they are not loose or corroded.
- Verify that the vehicle's fuses related to the tail lights and turn signals are intact.
- Ensure the vehicle's battery is properly connected and charged.
- Incorrect Function (e.g., Brake light stays dim):
- Re-check the wiring connections against the diagram to ensure each wire is connected to its correct corresponding function (e.g., red wire to brake, green to ACC).
- Moisture Inside Lens:
- While the product is waterproof, extreme conditions or improper sealing during installation can lead to condensation. If moisture persists, check the seal around the light and ensure no cracks are present.
10. User Tips
- Pre-Installation Test: Before fully installing the lights into the bumper, connect them to the vehicle's wiring and test all functions to confirm proper operation. This saves time if adjustments are needed.
- Professional Installation: If you are not experienced with automotive electrical systems, consider having the lights installed by a professional to ensure correct wiring and optimal performance.
- Regular Checks: Periodically check the lights for proper function, especially after car washes or heavy rain, to ensure all connections remain secure and waterproof.
11. Warranty and Support
For any issues, defective products, or support inquiries, please contact the seller directly. Customer service typically responds within 24 hours (excluding weekends and holidays).
A detailed user manual in PDF format may also be available for download. Please refer to the product page or contact the seller for the link to the PDF manual: User manual (PDF).