LINGKUN MH-T3000

Contents

LINGKUN MH-T3000 Red Light Therapy Panel

Instruction Manual

Model: MH-T3000 | Brand: LINGKUN

Introduction

The LINGKUN MH-T3000 is a 3000W Dual-Chip Red/Near-Infrared (NIR) Light Therapy Panel designed for home use. It utilizes 660nm Red light and 850nm Near-Infrared light to support various wellness and beauty applications, including anti-aging, skin care, and pain relief. This manual provides essential information for the safe and effective operation of your device.

Video: LINGKUN MH-T3000 Product Overview and Demonstration.

Safety Information

  • This device is intended for indoor use only.
  • Do not use the LED Red Light near water or in wet environments.
  • Always unplug the device when not in use.
  • Do not use or store the device next to a heat source.
  • The device emits visible red light and invisible infrared light. While infrared light is generally beneficial to the eyes, the red light can be bright. Closing your eyes is usually sufficient when treating the face directly. Safety goggles are not typically necessary for infrared light.

Specifications

Feature Specification
ModelMH-T3000
LED Type5W LED
LED Quantity600 pcs
LED Power3000W
Draw Power800W ±5%
Beam Angle60° (can be customized)
Input Voltage85-265V 50/60HZ
Timer Control5/10/15/20/25/30---60 Mins
Working Temperature-20°C to 40°C
Pulse FunctionRemote pulse function 0-9999HZ
Product Size1500*395*65mm (approx. 20*70*16cm in another source, please verify)
Wavelength670nm/850nm (Standard), Spectrum can be customized
Red/NIR Ratio1:1
Power Factor≥0.95
LED Lifespan50,000 hours
MaterialABS
Control MethodTouch Panel + Remote Control
CertificationCE, UL, RoHS, pse, PSB, KC, GS, FCC, ETL, CCC

Note: Product size may vary slightly based on configuration. Please refer to the specific product packaging for exact dimensions.

Setup

The LINGKUN MH-T3000 panel is designed for versatile placement. Ensure the device is unplugged before assembly or repositioning.

  1. Unpacking: Carefully remove all components from the packaging. Verify all parts are present according to the packing list.
  2. Assembly: The device typically comes with a base and wheels for mobility. Attach the panel securely to the base. The base allows for agile movement with silent casters, making it suitable for various rooms.
    LINGKUN MH-T3000 Red Light Therapy Panel on a rolling base

    Image: LINGKUN MH-T3000 Red Light Therapy Panel on its rolling base.

  3. Placement Options: The panel can be used in various orientations:
    • Vertical Suspension: For full-body coverage while standing.
    • Level Suspension: For targeted treatment while lying down.
    • Support Frame: For stable, upright use, or positioned for specific body areas like the face, waist, or abdomen.
    User relaxing with the red light therapy panel

    Image: User relaxing with the LINGKUN MH-T3000 panel, demonstrating typical usage.

  4. Power Connection: Connect the power cable to the device and then to a suitable power outlet (85-265V 50/60HZ). Ensure the voltage matches your local power supply. The device supports various plug types (EU, AU, UK, US); ensure you have the correct one for your region.

Operating Instructions

1. Basic Operation (Control Panel & Remote)

  1. Power On/Off: Once plugged in, the LED digital tube indicators on the control panel will light up for a self-check, then enter standby mode. Touch the "ON/OFF" button on the panel or press the "OFF" button on the remote control to turn the light on or off.
    Side view of the red light therapy panel showing the control panel

    Image: Side control panel with power and setting buttons.

  2. Setting the Timer: Use the "+" or "-" time buttons on the control panel or remote to set the desired session duration (5, 10, 15, 20, 25, 30, or 60 minutes). If the timer is set to 0, the device will remain on continuously. The panel will display the countdown time when active.
  3. Selecting Wavelengths:
    • Press the "RED" button on the control panel or remote to activate/deactivate the 660nm Red light. The "RED" indicator will light up in red.
    • Press the "NIR" button on the control panel or remote to activate/deactivate the 850nm Near-Infrared light. The "NIR" indicator will light up in yellow.
    • You can use Red light, NIR light, or both simultaneously.
  4. Pulse Function: The device features a remote pulse function with an adjustable frequency range of 0-9999Hz. When the pulse function is activated, the corresponding indicator light and LED digital tube will flash intermittently. The pulse function can be turned on even when only one light group (Red or NIR) is active.

2. Multiple Device Connection

The MH-T3000 supports connecting up to four devices, allowing one panel to control the others. This is useful for larger coverage areas.

  1. Connection: With all devices in the OFF state, long-press the designated button on the primary device. The LED screen will show a specific indicator (e.g., '0000'). Press the button again to confirm. This device will now control up to three other connected panels.
  2. Disconnection: To disconnect, long-press the designated button on the primary device again. The LED screen will show a different indicator (e.g., '0001'). Press the button again to confirm. The devices can then be used separately.

3. Usage Guidelines

  • Distance: Apply the light from 0-60 cm (0-24 inches) from the body for optimal penetration.
    Close-up of skin receiving red light therapy

    Image: Close-up of skin during red light therapy session.

  • Session Time: Expose each target area for 5-30 minutes per session, depending on the distance and desired intensity. Repeat on other areas as needed.
  • Frequency: Use the device 2 to 14 times per week until desired results are felt or observed. Consistency is key for best outcomes.

Maintenance

  • Cleaning: Ensure the device is unplugged before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is unplugged when not in use for extended periods.
  • Regular Use: Continue using the device several times a week to maintain benefits.

Troubleshooting

  • Device Not Turning On:
    • Check if the power cable is securely plugged into both the device and the wall outlet.
    • Ensure the power outlet is functional.
    • Press the power button on the control panel or remote firmly.
  • Lights Not Emitting:
    • Verify that the Red and/or NIR buttons have been pressed to activate the desired wavelengths.
    • If using multiple devices, ensure the primary device is correctly connected and powered.
  • Remote Control Not Responding:
    • Check the remote control's battery.
    • Ensure you are within the effective range (0-8 meters straight, 5 meters at a 45° angle) and there are no obstructions.
  • Unusual Noise or Smell: Immediately unplug the device and contact customer support.

User Tips

  • For full-body coverage, consider the overall dimensions of the panel (approximately 1500mm x 395mm x 65mm) to ensure it meets your needs.
  • Experiment with different distances (0-60cm) and session times (5-30 minutes) to find what works best for your specific goals and comfort level.
  • Consistency is key for optimal results. Integrate red light therapy into your routine regularly.

Warranty & Support

The LINGKUN MH-T3000 comes with a 1-year warranty for the main unit and a 3-month warranty for accessories. We provide lifetime technical support and 24/7 online after-sales service.

For detailed instructions and documents, you may refer to the User Manual (PDF).

If you encounter any issues or have questions, please contact our customer support team. We are committed to resolving any concerns to your satisfaction.

Contact Information: What's App: +86 17324319570

All our machines are CE certified, ensuring strict quality control and adherence to international safety standards.

© 2024 LINGKUN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.