1. Product Overview
The R4 is a compact 4-track Multi-Track Recorder (MTR) designed for musicians to capture musical ideas anytime, anywhere. It features 2 XLR/TS combo inputs, a built-in microphone, and onboard effects. The 32-bit float technology eliminates the need for constant level monitoring during recording, allowing you to focus on creative music production. The bounce function enables layering of more than 4 tracks.
1.1. Achieving High Audio Quality
With dual A/D converter circuits and support for 32-bit float WAV files, the R4 maintains the highest audio quality from recording to editing in a DAW or other software.
Recording
Dual A/D converter circuits allow recording sounds from quiet to loud without manual gain adjustments.
Editing in DAWs and other software
Using the 32-bit float WAV file format ensures that the original audio quality is retained during post-production editing.
1.2. Dual A/D Converter Circuit Overview
For each input circuit, the R4 utilizes two A/D converters with different input gains. This design ensures high-quality audio recording without the need for gain adjustments, a crucial step in traditional recording setups.
Providing Amazing Dynamic Range
The combination of two A/D converters achieves a wide dynamic range that is not possible with a single A/D converter.

Switching between two A/D converters
The R4 continuously monitors data from both A/D converters and automatically selects the one that yields the best recording results.
1.3. 32-bit Float WAV File Overview
32-bit float WAV files offer significant advantages over conventional 16/24-bit WAV files, preserving sound quality during recording and subsequent editing.
Resolution Advantage
32-bit float WAV files maintain high resolution even for quiet sounds. This allows quiet sections to be amplified during editing without degrading quality.
Clipping Advantage
If a waveform appears clipped during output from the R4 or in a DAW, it can be edited to lower its volume and restore an unclipped waveform. This is because the 32-bit float WAV file itself is not clipped internally.
2. Setup and Connections
2.1. Functions of Parts
Familiarize yourself with the various controls and connectors on your R4 Multi-Track Recorder.

Front Panel Controls:
- Display: Shows various types of information.
- TRACK/FUNCTION buttons: Used to operate icons at the bottom of the display.
- Faders: Adjust track signal levels.
- INPUT button: Opens the INPUT SELECT Screen for track recording selection.
- EFFECT button: Opens the Effect Setting Screen.
- RHYTHM button: Opens the Rhythm Screen for pattern/click settings.
- BOUNCE button: Combines (bounces) 4 recorded tracks into a BOUNCE track and clears tracks 1-4.
- UNDO button: Restores recordings to the state before the previous bounce.
- Search backward button: Moves playback position backward (brief press) or rapidly backward (continuous press).
- Search forward button: Moves playback position forward (brief press) or rapidly forward (continuous press).
- Stop button: Stops recording/playback. Moves playback to file beginning when stopped. Press and hold for Option Menu.
- Play indicator: Lights during playback.
- Play button: Starts file playback.
- Recording indicator: Lights during recording.
- Record button: Starts recording.
Side and Rear Panel Controls:
- INPUT A/MIC (built-in) switch: Selects between INPUT A jack or built-in mic for input.
- Battery cover: Access for installing/removing AA batteries.
- Tripod mounting threads: 1/4 inch diameter for tripod attachment.

Left, Right, and Front Sides:
- USB port (Type-C): Connects to computer/smartphone/tablet for file transfer or as a USB audio interface. Supports USB bus power.
- microSD card slot: Insert microSD card here.
- POWER button: Turns power on/off.
- Headphone/line out jack: Connect headphones with a stereo mini plug.
- VOLUME buttons: Adjust volume output from headphone/line out jack.
- INPUT A jack: Connect mic or instrument (XLR and TS connectors).
- Built-in mic: For recording acoustic instruments and vocals.
- INPUT B jack: Connect mic or instrument (XLR and TS connectors).
Note on XLR/TS Polarity:
- XLR: 1: GND, 2: HOT, 3: COLD
- TS: TIP: HOT, SLEEVE: GND
2.2. Inserting microSD Cards
A microSD card is essential for recording. Ensure the power is off before inserting or removing the card.
- With the power off, open the microSD card slot cover. Insert a microSD card with its connectors facing down until it clicks into place.
- To remove, push the card further in, then release to eject.
- Close the microSD card slot cover.
Important Notes:
- Always ensure the power is off when handling microSD cards to prevent data loss.
- Recording and playback are not possible without a microSD card.
- Always format new microSD cards or cards used with other devices using the R4 for optimal performance.
- Supported media: microSDHC (4 GB - 32 GB), microSDXC (64 GB - 1 TB).
2.3. Supplying Power
The R4 can be powered by AA batteries or via the USB port (AC adapter, USB bus power, or portable battery). USB power takes precedence over batteries.
Installing Batteries
To use AA batteries:
- Turn off the power.
- Remove the bottom cover and install 4 AA batteries (alkaline, NiMH, or lithium).
- Reattach the bottom cover.
Note:
- Use only one type of battery at a time.
- Set the correct battery type in the R4 settings for accurate charge display.
- If batteries lose charge, turn off the power immediately and replace them.
Connecting an AC Adapter
Connect the specified AC adapter (AD-17, 5V/1.0A) to the USB Type-C port, then plug into an outlet.
Using Other Power Supplies
The R4 can be bus-powered from a computer via the USB Type-C port or by a commercially available 5V portable battery.

2.4. Connecting Input Equipment
The R4 supports various input sources for recording.
Connecting Mics and Guitars to INPUT A/B
Mics and guitars can be connected to the INPUT A and INPUT B jacks.
- Connecting Mics: Connect dynamic and condenser mics to the XLR plugs of INPUT A and INPUT B. Phantom power can be supplied to condenser mics.
- Connecting Guitars and Basses: Connect guitars and basses to the TS plugs of INPUT A and INPUT B. The R4 supports Hi-Z input, allowing direct connection of guitars.
Note:
- Connect to the INPUT A jack to utilize the R4's built-in effects during recording.
Connecting Synthesizers and Other Stereo Output Devices
For stereo output devices, connect the L output to INPUT A and the R output to INPUT B. Two adjacent tracks can be stereo-linked to be treated as a single stereo pair.

Connection Examples:
- Overdubbing Electric Guitar, Bass, Vocals: Play along with a pre-loaded rhythm track or the R4's built-in rhythm sounds while recording.
- Recording Acoustic Guitar and Vocals with Two People: Layer recordings for small-scale music production.

2.5. Turning the Power On/Off
Turning the Power On
Press the POWER button until the recording and playback indicators light up. The Home Screen will appear. For first-time use or after a factory reset, you will be prompted to set the date and time.
Turning the Power Off
Press and hold the POWER button. The display will go blank, and the unit will power off. Do not disconnect power while "Saving data..." is displayed.
2.6. Initial Setup (First Use)
When powering on for the first time or after a factory reset, configure the following settings:
Setting the Date and Time
The date and time are included in recording files. Use the TRACK/FUNCTION buttons to navigate and ENTER to confirm. Repeat for year, month, day, hour, and minute.
Setting the Type of Batteries Used
Select the correct battery type (Alkaline, Ni-MH, Lithium) to ensure accurate display of remaining battery charge. Navigate to System > Battery Type and select the appropriate option.
3. Operation Guide
3.1. Navigating Menu Screens
The R4 features a user-friendly interface with a Home Screen, Option Menu, and Settings Screen.
Home Screen
This is the default screen for playback and recording.
Option Menu Screen
Press and hold the OPTION button from the Home Screen to access functions like NEW PRJ, FILE, TUNER, and SETTING.
Settings Screen
From the Option Menu, press the TRACK/FUNCTION button beneath SETTING to open the Settings menu. Use the TRACK/FUNCTION buttons to navigate and ENTER to confirm selections.
Returning to Previous/Home Screen
Press the TRACK/FUNCTION button beneath BACK to return to the previous screen. Press INPUT, EFFECT, or RHYTHM to return to the Home Screen.
3.2. Recording Process Overview
The R4 recording process generally follows these steps:
- Load microSD card and power on.
- Perform initial setup (if necessary).
- Create a new project.
- Connect input equipment (guitar, mic).
- Select tracks for recording.
- Connect headphones and adjust monitoring volume.
- Apply effects and play rhythm patterns (optional).
- Start recording.
- Stop recording and play back to check.
- Adjust levels and apply echo/reverb/EQ (optional).
- Perform punch-in recording (optional).
- Combine tracks in BOUNCE track (optional).
- Export project as audio file.
- Playback and check exported audio file.
3.3. Using the Tuner
The R4 includes a tuner function for guitars and other instruments.
- From the Home Screen, press and hold OPTION, then press the TRACK/FUNCTION button beneath TUNER.
- Use the TYPE, FLAT, and CALIB buttons to set tuner options.
- Play the open string you wish to tune. The display will show the pitch detuning.
Tuner Type Options:
| Display | Explanation |
|---|---|
| Chromatic | Shows nearest note and detuning. |
| Guitar | Standard guitar tuning (7th string). |
| Bass | Standard bass guitar tuning (5th string). |
| Open A, D, E, G | Open string tunings for chords. |
| DADGAD | Alternate tuning for tapping and other techniques. |
3.4. Setting the Rhythm (Pattern/Click)
Use rhythm patterns or a click track as a guideline for timing during recording or playback.
- From the Home Screen, press RHYTHM.
- Select items like Rhythm (on/off), Pattern, Tempo, Volume, and Pre Count using the TRACK/FUNCTION buttons and ENTER.
- Adjust values using the +/- buttons and confirm.
- Press RHYTHM again to return to the Home Screen.
Note:
- If rhythm playback or Pre Count is active, the Home Screen's playback position will show bars and beats.
The R4 offers a wide variety of rhythm pattern types, including various time signatures and genres such as rock, pop, jazz, funk, and more.
3.5. Recording
Opening Projects
Projects manage recording and playback data. Up to 1000 projects can be stored on a single card.
- Creating New Projects: From the Home Screen, press and hold OPTION, then press NEW PRJ.
- Opening Existing Projects: From the Home Screen, press and hold OPTION, then navigate to Settings > Project > Project List. Select a project and choose "Open".
Making Input Settings
Assign input sources to tracks.
- Connect your equipment to INPUT A or INPUT B.
- Set the INPUT A/MIC switch to INPUT A or MIC as needed.
- From the Home Screen, press INPUT.
- Select the input to assign to each track. Phantom power is supplied if INPUT A or INPUT B is selected.
Monitoring Input/Playback Sounds
Connect headphones to the headphone/line out jack. Adjust the volume using the VOLUME buttons. The volume level is shown on the display.
Enabling Stereo Linking
Two adjacent tracks (1/2 or 3/4) can be stereo-linked. This treats them as a single stereo pair, with odd-numbered tracks assigned to L and even-numbered to R. The odd-numbered track's fader controls volume, and PAN is disabled.
To stereo-link: From the Home Screen, simultaneously press the TRACK/FUNCTION buttons beneath the two tracks to be linked. The stereo-linking icon will appear. Repeat to disable.
Making Track Settings
Equalizer, left-right balance, and effects can be set per track. These settings apply during playback and bouncing.
- From the Home Screen, press the TRACK/FUNCTION button beneath the desired track.
- Adjust High, Middle, Low frequency EQ, Pan (left-right balance), Echo, and Reverb levels.
- Use +/- buttons to change values and BACK to return.
Starting and Stopping Recording
- Press the RECORD button. The recording indicator will light.
- Press the STOP button to stop recording.
Note:
- Bouncing/exporting is not possible if a track exceeds 93 minutes.
Partially Re-recording (Punch-in Recording)
Punch-in/out allows re-recording specific parts of existing tracks.
- Determine the track to be re-recorded and make input settings.
- Move the playback position to just before the desired re-recording start point.
- Press PLAY to start playback.
- Press RECORD at the desired start position.
- Press RECORD again at the desired stop position. Playback will continue.
- Press STOP to end playback.
- Press PLAY to review the recorded part.
Combining Recorded Tracks in a Bounce Track (Bouncing)
Bouncing mixes multiple tracks into a single "bounce track".
- Press STOP.
- Press BOUNCE from the Home Screen.
- Select "Quick Bounce" (fast, no adjustments) or "Real Time Bounce" (allows fader adjustments during bounce).
- The Bounce Screen will open. After bouncing, tracks 1-4 will be empty.
- Press PLAY to listen to the bounce track. Use UNDO to revert if not satisfied.
Note:
- Maximum 99 bounces.
- Rhythm patterns will be mixed into the bounce track if enabled.
3.6. Using Effects
The R4 includes various effects similar to ZOOM multi-effects products.
Insert Effects
Applied to INPUT A or the built-in mic during recording. Two effects can be chosen and their parameters adjusted. Settings are saved with each project.
- Press EFFECT from the Home Screen.
- Select an effect type and adjust its parameters using the navigation and +/- buttons.
- Press EFFECT again to return to the Home Screen.
Send Effects (Echo/Reverb)
These effects are applied to tracks and do not affect recorded files directly.
- Adjust Echo or Reverb levels in the Track Settings (see "Making Track Settings").
- To adjust Echo/Reverb parameters: From the Home Screen, press and hold OPTION, then navigate to Settings > Echo/Reverb.
- Select and adjust parameters like Echo Time, Echo Repeat, and Reverb Decay.

3.7. Playing Recordings
To play back recorded files:
- Press the PLAY button. Press again to stop.
- Press the STOP button to stop playback and return to the file beginning.
Other Playback Operations:
- Search backward/forward: Brief press moves position slightly; continuous press moves rapidly.
3.8. Managing Projects
Projects are saved on the microSD card and can be managed (renamed, copied, deleted).
Folder and File Structure
Files are organized in a `R4_Project` folder on the microSD card. Each project has its own folder (e.g., `yyyymmdd_001`) containing audio files (`TRACKx_yy.WAV`) and a project file (`R4PRJDATA.r4prj`). Exported audio files are saved in the Root folder.
Changing Project Names
- Open the Project Menu (Settings > Project > Project List).
- Select the project, then choose "Rename".
- Input the new name (up to 13 characters) using the character input screen.
Duplicating Projects
- Open the Project Menu.
- Select the project, then choose "Copy".
- Input a new name for the duplicated project.
Deleting Projects
- Open the Project Menu.
- Select the project, then choose "Delete".
- Confirm deletion.
3.9. Assigning Files to Tracks
You can assign existing audio files (WAV, MP3) to tracks within a project.
- Open the project.
- From the Home Screen, press and hold OPTION, then press FILE.
- Select the target track for assignment.
- Choose "Project" (to load from an existing project), "SD Card" (to load a file from the microSD card), or "Clear Track" (to remove an assigned file).
3.10. Exporting Projects as Audio Files
Projects can be exported as WAV or MP3 audio files. Exported files are saved in the root directory of the microSD card.
- Open the Project Menu (Settings > Project > Export).
- Select file format (WAV, MP3).
- Select bit depth (16-bit, 24-bit, 32-bit float; MP3 is fixed at 128 kbps).
- Choose "Normalize" (On/Off) to adjust the loudest volume.
- Select "Execute" to start exporting.
3.11. Using as an Audio Interface
The R4 can send input signals to a computer/smartphone/tablet and output signals from these devices.
For Windows
A dedicated driver is required. Download the latest R4 Driver from zoomcorp.com and follow the installation instructions.
Connecting to Computers, Smartphones, and Tablets
- From the Home Screen, press and hold OPTION, then navigate to Settings > USB.
- Select "Audio Interface" or "File Transfer".
- Select the device type (PC/Mac or Mobile Device).
- Connect the R4 to your device using a USB Type-C cable. (A Lightning to USB 3 Camera Adapter is needed for iOS/iPadOS devices).
Making Mix Settings for Input Audio
On the Audio Interface Screen, press MONO MIX to toggle between:
- Off: INPUT A to channel 1, INPUT B to channel 2 (separate mono files).
- On: INPUT A and B mixed to mono, sent as two channels (e.g., for streaming).
Setting Direct Monitoring
Direct monitoring outputs the sound input to the R4 before sending it to the connected device, eliminating latency. On the Audio Interface Screen, press MONITOR to toggle On/Off.
Setting the Bit Depth
When used as an audio interface, the bit depth can be set to 24-bit or 32-bit float. On the Audio Interface Screen, press FORMAT to switch bit depth.
Precautions for 32-bit float format:
- Confirm your app/device supports 32-bit float.
- Minimize R4 headphone volume before connecting external devices.
- Windows requires a dedicated driver for 32-bit float.
Transferring Files to Computers and Other Devices
When connected via USB, files on the microSD card can be accessed and moved.
- From the Home Screen, press and hold OPTION, then navigate to Settings > USB > File Transfer.
- Select the device type (PC/Mac or Mobile Device).
- Connect the R4 via USB Type-C.
- Use your computer/device to manage files.
Disconnecting from Computers, Smartphones, and Tablets
- On the R4, from the File Transfer or Audio Interface screen, select "Exit" and confirm.
- Perform safe ejection procedures on your computer/device (e.g., "Safely Remove Hardware" on Windows, drag to Trash on macOS).
- Disconnect the USB cable.
3.12. Managing microSD Cards
Checking microSD Card Information
You can check the remaining space on your microSD card. From the Home Screen, press and hold OPTION, then navigate to Settings > SD Card > Remaining.
Formatting microSD Cards
Formatting maximizes card performance and deletes all data. From the Home Screen, press and hold OPTION, then navigate to Settings > SD Card > Format. Select "Execute" and confirm.
Note:
- All data will be deleted upon formatting.
- The formatting screen can also be accessed by pressing RECORD while turning the power on.
Testing microSD Cards
Test the writing speed of your microSD card to ensure performance. From the Home Screen, press and hold OPTION, then navigate to Settings > SD Card > Performance Test.
- Quick Test: A simple, fast test.
- Full Test: A more thorough test.
Select "Execute" to start the test. Even if the test result is "OK", it does not guarantee against all writing errors.
3.13. Making Various Settings
Setting Display Power Saving
To conserve battery, the display backlight can dim after a period of inactivity. From the Home Screen, press and hold OPTION, then navigate to Settings > System > Power Saving. Select "On (30sec)" or "Off".
Setting the Display Brightness
Adjust the display brightness. From the Home Screen, press and hold OPTION, then navigate to Settings > System > LCD Brightness. Select Low, Medium, or High.
Setting the Function that Automatically Turns the Power Off
The R4 can automatically power off after a period of inactivity. From the Home Screen, press and hold OPTION, then navigate to Settings > System > Auto Power Off. Select "On" (auto-off after 10 hours) or "Off" (stays on).
Note:
- Auto power off is disabled during recording, playback, audio interface use, file transfer, or card testing.
Restoring Factory Default Settings
To reset all settings to their factory defaults: From the Home Screen, press and hold OPTION, then navigate to Settings > System > Factory Reset. Select "Execute" and confirm. The R4 will power off after resetting.
3.14. Managing the Firmware
Checking the Firmware Versions
To check the current firmware versions: From the Home Screen, press and hold OPTION, then navigate to Settings > System > Firmware.
Updating the Firmware
Firmware updates can be downloaded from zoomcorp.com. Follow the instructions in the "R4 Firmware Update Guide" on the download page.
Checking the Latest Information about the R4
A 2D code for help and information is available. From the Home Screen, press and hold OPTION, then navigate to Settings > System > Help. Use a smartphone or tablet to scan the displayed QR code.
4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the unit. Do not use abrasive cleaners or solvents.
- Storage: Store the R4 in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods.
- Battery Care: Always use fresh batteries or fully charged rechargeable batteries. Dispose of used batteries responsibly.
- MicroSD Card Care: Regularly back up your data. Format the card periodically using the R4 to maintain performance.
5. Troubleshooting
If you encounter issues with your R4, refer to the following common problems and solutions:
5.1. Recording/Playback Issues
No sound or output is very quiet:
- Check mic orientation and connected equipment volume settings.
- Verify headphone connection and volume.
- Ensure channel faders are not too low.
- Check R4 input source settings and phantom power settings.
- Confirm INPUT A/MIC switch is set correctly.
- Ensure level meters are rising appropriately.
Built-in mic sound is distorted:
- The input sound level might be too high. Move the R4 further from the sound source.
INPUT A/B sound is distorted:
- Adjust the volume of the connected device and confirm R4 input source settings.
Recording is not possible:
- Confirm INPUT A/MIC switch is set correctly.
- Ensure connected device is properly connected.
- Check recording track settings.
- Verify sufficient free space on the microSD card.
- Ensure microSD card is properly inserted and functional.
The recorded sound breaks up:
- Format the microSD card using the R4.
- Confirm the microSD card is functioning correctly.
Recorded sound cannot be heard or is very quiet:
- Confirm that the track faders are not too low.
Cannot use tuner:
- Confirm that the INPUT A/MIC (built-in) switch is set as intended.
5.2. Other Issues
Recorder not recognized by computer/smartphone/tablet via USB:
- Use a USB cable that supports data transfer.
- Ensure the R4's operation mode is set correctly (Audio Interface or File Transfer).
- If using 32-bit float, confirm device/app compatibility.
- Windows requires a dedicated driver for 32-bit float.
Battery operation time is short:
- Correctly set the battery type in settings.
- Turn off unused inputs and phantom power.
- Set display to dim with power saving.
- Reduce display brightness.
- Consider using high-capacity NiMH or lithium batteries for longer use.
Date and time are frequently reset:
- If power is not supplied for a while (no AC adapter or batteries), date/time settings will reset. Re-enter them as needed.
6. User Tips
- Optimize Battery Life: Always set the correct battery type in the system settings and utilize the display power saving and auto power off features to maximize recording time on the go.
- MicroSD Card Best Practices: For reliable performance, always format new microSD cards directly on the R4. Regularly back up your projects to a computer to prevent data loss.
- Seamless Overdubbing: When performing punch-in recording, try to match your mic distance and instrument volume as closely as possible to the original recording for a smooth transition.
- Leverage 32-bit Float: Don't worry about clipping during recording with 32-bit float. You can adjust levels and recover clipped waveforms in post-production, offering immense flexibility.
- Creative Bouncing: Use the "Real Time Bounce" feature to creatively mix your tracks by adjusting faders during the bouncing process, adding a dynamic element to your final mix.
7. Specifications
| Category | Item | Specification |
|---|---|---|
| Input and output channels | Inputs | Built-in mic (mono) x 1, XLR/TS inputs (mono) x 2 |
| Output | Headphones x 1 | |
| Inputs | XLR/TS inputs Connectors | 2 XLR/TS combo jacks (Balanced, XLR: 2 HOT) |
| Input gain | No adjustment required (dual A/D converter circuit used) | |
| Input impedance | XLR: 2.3 kΩ, TS: 1 MΩ | |
| Maximum input level | XLR: +4 dBu, TS: +10 dBu | |
| Phantom power | +48 V (switchable separately for INPUTS A and B) | |
| Equivalent input noise | XLR: -120 dBu or less (IHF-A), TS: -107 dBu or less (IHF-A) | |
| Frequency response | XLR: -0.5/+0.0 dB, 20 Hz - 20 kHz, TS: -0.2/+0.0 dB, 20 Hz - 20 kHz | |
| Built-in mic input Directionality | Omnidirectional | |
| Output | Headphones Connector | 1 stereo 3.5mm mini jack |
| Output impedance | 10 Ω | |
| Maximum output level | 20 mW + 20 mW (into 32Ω load) | |
| Recorder | Maximum simultaneous recording tracks | 2 |
| Recording format | WAV: 48kHz, 32-bit float, mono | |
| Recording media | microSDHC (4 GB - 32 GB), microSDXC (64 GB - 1 TB) | |
| Display | 2" full-color LCD (240 x 320) | |
| USB | Connector | USB Type-C |
| Audio interface Class | USB 2.0 High Speed | |
| Audio interface Sampling frequency | 48 kHz | |
| Audio interface Bit Rate | 24-bit or 32-bit float | |
| Power supply | 4 AA batteries (alkaline, lithium, or rechargeable NiMH), AC adapter (ZOOM AD-17, 5V/1.0A), USB bus power | |
| Estimated continuous operation time using batteries | Recording 1 track, playing 1 track, phantom power off, headphones into 32Ω load, power saving on | Alkaline: ~7 hours, NiMH (1900 mAh): ~6 hours, Lithium: ~14 hours (approximate values) |
| Power consumption | 5 W | |
| External dimensions | 74 mm (W) x 138 mm (D) x 36 mm (H) | |
| Weight (including batteries) | 287 g |
Note: 0 dBu = 0.775 Vrms
8. Warranty and Support
For product support, warranty information, and the latest firmware updates, please visit the official ZOOM Corporation website.
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 JapanWebsite: zoomcorp.com
Please retain your proof of purchase for warranty claims.