1. Important Safety Information
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
- Handle with care to avoid cuts or injuries.
Warning: For decorative use only inside the vehicle. Do not obstruct the driver's view or interfere with vehicle operation. This is not a professional audio accessory and is intended solely for ambiance decoration.
2. Product Overview
The KEVANLY D6 Car RGB Pickup Light is a USB-powered rhythm lamp designed to enhance the ambiance of your car interior, home, or office. It features dynamic gradient sound control, allowing the lights to sway and react to music and ambient sounds. With RGB full-color lighting and 250 lamp beads, it offers various modes and effects to create a vibrant atmosphere.
Video: Demonstration of the KEVANLY D6 Car RGB Pickup Light's dynamic lighting effects.
Image: KEVANLY D6 Car RGB Pickup Light in action, showcasing its iridescent sound pickup rhythm ambient light with RGB full color to enhance the atmosphere.
Key Features:
- RGB full-color lighting
- Sound pickup rhythm light
- Atmosphere decoration
- Non-destructive installation
- 250 lamp beads
- USB plug and play
- Intelligent start and stop (senses car vibration for auto-on, auto-sleep after 3 minutes of no vibration)
Image: Diagram illustrating the six major functions of the KEVANLY D6 light, including RGB full-color lighting, sound pickup, atmosphere decoration, non-destructive installation, 250 lamp beads, and USB plug and play.
Image: The KEVANLY D6 light showcasing visible musical rhythms, reacting to sound in a desktop environment.
Image: Visual representation of the multiple dynamic modes available for the KEVANLY D6 light, including Interaction, Flame, Meteor, Night Light, Colorful and Dynamic, Ascension, and Jump Mode.
3. Product Specifications
| Attribute | Value |
|---|---|
| Product Name | Pendulum Rhythm Light Ornament (Vehicle-mounted aromatherapy sound pickup lamp) |
| Model | D6 |
| Brand Name | KEVANLY |
| Item Type | Atmosphere lamp |
| Material | High-quality PC+PP (ABS) |
| Input Power Supply | 5V 2A (10 tube columns, 250 lamp beads) |
| Voltage | 5V |
| Product Weight | Net weight 79g, gross weight 149g (including accessories) |
| Installation Method | Silicone clip/double-sided tape for air outlet or dashboard |
| Installation Location | Cars/home/office, etc. |
| High-concerned chemical | None |
Image: Product dimensions (Length: 17.50cm / 6.89inch, Width: 2.20cm / 0.86inch, Height: 8.80cm / 3.46inch).
Image: Product packaging dimensions (Length: 20.00cm / 7.87inch, Width: 13.00cm / 5.12inch, Height: 3.00cm / 1.18inch) and total weight (149g including accessories).
4. Installation
The KEVANLY D6 offers two primary installation methods: air outlet clamp and double-sided tape adhesive.
Preparation:
- Clean the placement area (desktop/car dashboard), wipe away grease and dust, ensuring it remains dry and level.
- Position the ornament on a stable surface, avoiding obstruction of the driver's view and staying clear of airbags/ventilation outlets.
Installation Methods:
-
Air Vent Installation:
- Attach the provided air outlet clamp to the back of the light unit.
- Clamp the unit securely to a car air vent.
- Connect the USB power cable to the Type-C interface on the bottom of the unit.
Image: Illustration of the two installation methods: air outlet clamp for car vents and double-sided tape for dashboards.
Image: Detail of the upgraded silicone soft clip, designed for flexible adaptation to various vehicle models and stable driving.
Video: Demonstration of installing the light using the air vent clamp.
-
Dashboard Installation:
- Peel off the protective film from the strong adhesive stickers.
- Apply the stickers to the bottom of the light unit.
- Firmly press the light unit onto a smooth, clean dashboard surface.
- Connect the USB power cable to the Type-C interface on the back of the unit.
Video: Demonstration of installing the light using double-sided adhesive tape on the dashboard.
Power Connection:
Connect the USB power cable: plug one end into the ornament's port (either bottom or back Type-C interface) and the other into a 5V USB power source (car charger/power bank/outlet). Powering on automatically activates the device.
Image: Close-up of the Type-C charging interfaces located on the bottom (for air outlet installation) and back (for dashboard installation) of the light unit.
5. Operation
After powering on, the light automatically oscillates to ambient sounds/music rhythms without manual adjustment. The unit features three control buttons for customization:
Image: Diagram detailing the functions of the three control buttons: Power, M (Mode), and C (Color/Brightness).
-
Power Button (Far Left):
- Short press: Turns the light ON and cycles through various animated attraction modes.
- Long press: Turns the light OFF.
-
'M' Button (Middle):
- Short press: Cycles through various preset lighting modes.
- Long press: Cycles through volume sensitivity settings (5 levels).
-
'C' Button (Far Right):
- Short press: Cycles through preset color settings.
- Long press: Adjusts brightness settings (5 levels). Release your hand at the desired brightness.
Video: Demonstration of button functions and various light modes.
Intelligent Start and Stop:
The light features an intelligent micro-motion sensing chip. It automatically turns on when it senses car vibration (auto start on board) and automatically goes to sleep after three minutes of no vibration (auto close after getting off).
Image: Illustration of the intelligent start and stop function, showing the light automatically activating with car vibration and sleeping after inactivity.
6. Maintenance
- Avoid forceful contact or dropping the light to prevent sensor damage.
- Regularly wipe dust from the lamp surface to maintain sensing performance.
- Ensure secure placement in the vehicle to prevent shifting or falling during driving.
- Keep sharp objects away from the ornament's casing to avoid scratches.
- When not in use for extended periods, disconnect the power supply and store in a dry, dust-free location.
7. Troubleshooting
- Light not turning on: Ensure the USB cable is securely connected to a 5V power source. Check if the power button has been long-pressed to turn off the device.
- Lights not reacting to sound: Check the 'M' button settings to ensure the volume sensitivity is set appropriately. Try increasing the sensitivity. Ensure the light is placed close enough to the sound source.
- Inaccurate sound response: Adjust the pickup sensitivity using a long press on the 'M' button. Keep a proper distance from the car speaker for better rhythm effect. Note that the device may be more sensitive to higher frequencies.
- Light flickering or inconsistent behavior: Ensure the power supply is stable and provides a consistent 5V output. Avoid connecting to high-voltage sources to prevent circuit burnout.
- Scratches on tubes: The tubes are plastic and can show scratches easily. Handle with care during installation and cleaning.
8. User Tips
- For optimal sound reaction, experiment with the placement of the light and adjust the microphone sensitivity. Some users find it works best when closer to the sound source.
- The light offers a wide range of imaginative settings and modes. Take time to explore them using the 'M' and 'C' buttons to find your preferred ambiance.
- When installing in a car, connect to the car's USB port and unplug promptly after turning off the ignition to prevent draining the vehicle battery.
- While the tubes are plastic, they are very bright and colorful. Adjust brightness to your comfort level using a long press on the 'C' button.
9. Package Contents
The KEVANLY D6 Car RGB Pickup Light package includes:
- 1 x Car Sound Control Pickup Light (Ambient light)
- 1 x Air Vent Clip
- 1 x Strong Adhesive Sticker (for dashboard installation)
- 1 x USB Power Cable (Type-C charging cable)
Image: Contents of the KEVANLY D6 package, including the light unit, USB cable, air outlet clamp, and double-sided tape.
Image: The KEVANLY D6 product box and its accessories.
10. Compliance Information
This product complies with EU RoHS and REACH environmental directives, meets LVD 2014/35/EU low-voltage electrical regulations and EMC 2014/30/EU electromagnetic compatibility regulations, and is suitable for use in the EU market.
Manufacturer: Guangzhou Kejie Trading Co., Room 302, No. 10, Ou Gang North Street, Ke Mu Long West Road, Tianhe District, Guangzhou City, Guangdong Province, China.
EU Authorized Representative: SUCCESS COURIER SL, Calle de RIO TORMES 13A, oficina 1, Fuenlabrada, Madrid, 28947 Spain.
Image: CE and WEEE (Waste Electrical and Electronic Equipment) symbols, indicating compliance with European standards and proper disposal guidelines.
11. Warranty and Support
For any questions, support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.
A detailed user manual in PDF format is available for download: View User Manual (PDF)