arikasen HT03

Contents

Arikasen HT03 Open Ear Bluetooth Headset User Manual

Model: HT03 | Brand: arikasen

Introduction

The Arikasen HT03 Open Ear Bluetooth Headset is designed for comfort and clear communication, featuring an open-ear design, a noise-cancelling boom microphone, and Bluetooth 5.4 connectivity. This manual provides detailed instructions for setting up, operating, and maintaining your headset.

Video: Arikasen HT03 Product Overview. This video demonstrates the headset's key features including the rotatable microphone, noise-cancelling capabilities, sound quality, open-ear design, Bluetooth 5.4, 12-hour battery life, and lightweight construction.

Package Contents

Please check the box for the following items:

  • Arikasen HT03 Open Ear Headphones x 1
  • USB-C Charging Cable x 1
  • User Manual x 1
Arikasen HT03 Open Ear Bluetooth Headset

Image: The Arikasen HT03 Open Ear Bluetooth Headset in black, featuring the main unit and boom microphone.

Specifications

Feature Description
Model No.HT03
Bluetooth ChipsetMost Advanced Bluetooth 5.4 DSP Chip
Bluetooth Version5.4
Operation RangeUp to 10-15 Meters Without Obstacles
Bluetooth ProtocolsHSP/HFP/A2DP/AVRCP
Audio CodecAAC/SBC
Battery Capacity150mAh/3.7V
Charging Time1.5-2 Hours
Stand-by Time200 Hours
Working TimeAbout 15 Hours (at 70% Volume)
Speaker Size15mm
MaterialABS, Plastic, Silica Gel
Frequency Response Range20 - 20000 Hz
Resistance32 Ω
Impedance Rangeup to 32 Ω
WaterproofYes
With MicrophoneYes (Boom Microphone with ENC Noise Cancelling)
Voice Assistant Built-inYes
Control ButtonYes
Volume ControlYes
Dual ConnectionSupport Multipoint Connect
Active Noise-CancellationNo (Features ENC Noise Cancelling for Microphone)
Support APPNo
CertificationCE, FCC
Arikasen HT03 features

Image: Visual representation of key features including Bluetooth 5.4, USB-C charging, 12-hour battery time, and noise-canceling microphone.

Setup

1. Charging the Device

Before first use, fully charge the headset. When the device is low on power or cannot be switched on, it can be charged by inputting DC 5V through the USB-C cable.

  • Connect the provided USB-C charging cable to the headset's charging port and a DC 5V power adapter (not included).
  • The red light will be on during charging.
  • The blue light will be on when the battery is full.

Note:

  • The headset will automatically switch off when the charging cable is plugged in during the power-on state.
  • Do not use the headset while charging.
USB-C Charging Port

Image: Close-up view of the USB-C charging port on the headset with a charging cable connected.

2. Switching On/Off

  • To Switch On: Press and hold the multi-function button for approximately 2 seconds. The indicator light will flash red and blue alternately, indicating it is in pairing mode.
  • To Switch Off: Press and hold the multi-function button for approximately 3 seconds. The red light will be on for 2 seconds, and then the Bluetooth device will automatically power off.

3. Pairing with a Mobile Phone

For first-time use, the headset needs to be paired with a mobile phone connection.

  1. In the off state, press and hold the multi-function button for about 2 seconds to turn on the headset. The indicator light will flash red and blue alternately.
  2. Open the Bluetooth function on your mobile phone, search for the Bluetooth device name "HT03", select it, and connect.
  3. If necessary, you can enter the password "0000".
  4. After successful connection, the blue light will flash slowly intermittently (flash once every 5 seconds).

Note:

  • After successful connection, the next time you turn on the HT03, the headset will automatically connect back to the last connected phone.

4. Connecting Two Devices Simultaneously (Multipoint Connection)

The HT03 headset supports connecting to two devices at the same time, such as a cell phone and a computer, to improve work efficiency.

  1. Pair the Bluetooth receiver to the first phone. After successful pairing, turn off the Bluetooth function of the first phone. The receiver will enter pairing mode again.
  2. Pair the Bluetooth receiver to the second phone.
  3. After successful pairing with the second phone, turn on the Bluetooth function of the first phone. Select "HT03" and click "connect".
  4. Both phones will now be connected to the Bluetooth receiver at the same time.

Note:

  • You cannot answer calls or enjoy music on both devices simultaneously. You can seamlessly switch between the two connected devices.
Connect 2 Devices at the Same Time

Image: The headset connected to both a laptop and a smartphone, illustrating its dual device connection capability.

Operating Instructions

1. Key Interface Definition

Headset Control Buttons Diagram

Image: Diagram illustrating the location and function of the headset's control buttons.

  1. Volume+ / Next Song: Short press for Volume+, Long press for Next Song.
  2. Volume- / Previous Song: Short press for Volume-, Long press for Previous Song.
  3. USB-C Charging Port: For charging the device.
  4. Mute / Unmute: Toggle switch for microphone mute function.
  5. Multi-function Button:
    • Power ON/OFF
    • Play/Pause
    • Answer/Hang up calls
    • Activate Voice Assistant

2. Music Playback

  • Pause/Play: Short press the multi-function button.
  • Next Song: Long press the 'Volume+' button for 1 second.
  • Previous Song: Long press the 'Volume-' button for 1 second.
  • Volume Up: Short press the 'Volume+' button.
  • Volume Down: Short press the 'Volume-' button.

3. Bluetooth Calls

  • Answering an Incoming Call: Short press the multi-function button.
  • Hang Up: Short press the multi-function button.
  • Reject a Call: Long press the multi-function button for 1 second.
  • Call Switching (between phone and device): While on a call, press and hold the multi-function button for 1 second.
  • Incoming Calls While on a Call:
    • Short press the multi-function button to answer a new call and hang up the current call.
    • Long press the multi-function button for 1 second to answer a new call and keep the current call.
  • Call Volume Up: Short press the 'Volume+' button.
  • Call Volume Down: Short press the 'Volume-' button.

Note:

  • Turn the microphone to the front end when talking and set the microphone mute switch to the non-mute mark position to avoid affecting the call effect.

4. Voice Assistant

When connected to a mobile phone, double-click the multi-function button to turn on or off the mobile phone voice assistant function.

5. Mute the Microphone

When talking, turn the microphone mute switch to the mute mark position so that the other party cannot hear your own voice.

Microphone Mute Switch

Image: Close-up view of the microphone arm, highlighting the mute switch.

6. Wearing Diagram

The headset is designed to fit comfortably around your ears. The microphone boom is rotatable, allowing you to position it for optimal voice capture or move it out of the way when not needed.

Headset Wearing Diagram

Image: Diagram showing how to properly wear the headset and adjust the microphone boom for use or storage.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headset. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headset regularly even if not in use for extended periods.

Troubleshooting

1. Clearing the Bluetooth Pairing List

If you experience issues with pairing or connecting, you can clear the headset's pairing list:

  • When there is no connection, press and hold the multi-function button for about 5 seconds until the red and blue lights are on for 2 seconds at the same time. The headset will automatically clear the Bluetooth pairing list and re-enter pairing mode.

2. Low-Power Alert/Auto-Power Off

  • When the red indicator blinks and the voice prompts "LOW BATTERY" every 5 minutes, the headset will power off automatically. Please charge it as soon as possible.
  • The HT03 will be powered off automatically to save battery life if not connected or disconnected with any devices over 10 minutes.
  • If the battery is lower than 3.1V, the item will power off automatically.

3. PC Connection Settings

If you encounter issues connecting to a PC or using the microphone with meeting applications, follow these steps:

PC Connection Settings Diagram

Image: Diagram showing the steps to connect the HT03 headset to a PC via Bluetooth and configure sound settings for applications like Skype.

  • For PC Connection: Go to PC Settings > Devices > Bluetooth & other devices. Search and click 'HT03'. Then go back to System > Sound and set 'HT03' as Input & Output device.
  • For Skype & Other Meeting Apps: In the app's Audio & Video settings, ensure 'HT03' is selected as the Mic and Speakers.
  • Notice: Please update your Bluetooth driver or use a Bluetooth adapter on your PC to pair the headset if the connection doesn't work.

User Tips

  • Microphone Placement: The boom microphone is rotatable by 270 degrees, allowing you to position it on either the left or right side for optimal voice capture. Adjust it closer to your mouth for clearer audio during calls.
  • Comfort for Extended Use: The headset is very lightweight (approx. 29g) and designed for all-day comfort. Its flexible, skin-friendly silicone material and ergonomic fit minimize ear fatigue.
  • Call Quality: The ENC noise-cancelling microphone provides excellent clarity for calls and online meetings, even in noisy environments.
  • Battery Life: The headset offers up to 12-15 hours of music and call time, making it suitable for long workdays or travel.
  • Awareness: The open-ear design allows you to hear your surroundings while enjoying audio, enhancing safety during activities like cycling or driving.

Warranty and Support

For detailed warranty information and customer support, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format is available for download:

View User Manual (PDF)

Safety Warnings

  • Listening to music for an excessively long time may cause discomfort. Use a medium volume instead of a high one.
  • Regardless of the volume, do not let the audio prevent you from hearing your surroundings. Exercise caution when using the headphones.
  • Do not throw, press, or immerse the headphones in water.
  • Keep the headphones away from fire, water, and high-voltage devices.
  • Use only the specified Type-C USB cable and a DC 5V adapter for charging to avoid abnormal operation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.