LINCUKOO Water Leak Detectors and LoRa gateway (3-Pack)

Contents

LINCUKOO Water Leak Detectors and LoRa Gateway User Manual

Model: Water Leak Detectors and LoRa gateway (3-Pack)

Brand: LINCUKOO

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your LINCUKOO Water Leak Detectors and LoRa Gateway (3-Pack). This smart home system is designed to provide early warning of water leaks and drips, protecting your property from potential damage.

The system utilizes LoRa (Long Range) Ultra-Long Distance Low-Latency Transmission Protocol, offering an impressive range of up to 2000ft/600m, allowing coverage even in challenging environments like basements or detached garages. It features a 120dB siren and instant app alerts to ensure you are notified promptly of any detected water.

LINCUKOO Water Leak Detectors and LoRa Gateway (3-Pack) with smartphone app showing an alert

Image: The LINCUKOO LoRa Gateway and three water leak sensors, alongside a smartphone displaying a water leakage alarm notification.

2. Package Contents

Please check the package for the following items:

  • 1x LoRa Gateway
  • 3x Water Leak Sensors
  • 1x Quick Installation Guide
  • 6x AAA Batteries
  • 1x USB Power Cable
Contents of the LINCUKOO Water Leak Detector package, showing one gateway and three sensors

Image: Visual representation of the package contents, including the LoRa gateway and three water leak sensors.

3. Specifications

General Specifications
Feature Detail
Brand Name LINCUKOO
Origin Mainland China
Certification CE, FCC, RoHS
Wireless Protocol LoRa (Long Range)
Wi-Fi Support 2.4 GHz only (5 GHz not supported)
Transmission Distance Up to 2000ft / 600m (open areas, optimal conditions)
Alarm Sound Level 120dB
Waterproof Rating IP66
Detection Speed 0.1 seconds
Minimum Water Detection 0.3 mm
Sensor Dimensions (L x W x H) 84 mm x 36 mm x 26 mm
Battery Type 2x AAA Batteries per sensor
Battery Life Up to 1 year (sensors)
Max Devices Supported Up to 128 devices per gateway
Comparison table of Upgraded Detector vs Basic Detector specifications

Image: A comparison of an upgraded detector (2000ft, IP66, 120dB, 5-year battery life) and a basic detector (200ft, IP65, 90dB, 5-year battery life). Note: Text description states 1-year battery life for sensors.

4. Setup Instructions

4.1. Install Smart Life App

Before starting, download and install the "Smart Life" app on your smartphone. You can find it in the APP Store (iOS) or Google Play Store (Android). Register an account if you don't already have one.

4.2. Connect LoRa Gateway to Router

  1. Power On the Gateway: Connect the LoRa gateway to a power source using the provided USB power cable.
  2. Prepare for Pairing: Ensure your phone is connected to a 2.4 GHz Wi-Fi network. The gateway's indicator light should flash after connecting power. If it does not flash, press and hold the button on the gateway for 5 seconds until the pairing indicator light flashes.
  3. Add Gateway in Smart Life App:
    • Open the "Smart Life" app.
    • Click the "+" icon in the top-right corner to "Add Device".
    • Follow the on-screen instructions to connect the gateway to your network.

Video: Demonstrates connecting the Easebloom LoRa Gateway to power, adding it to the Smart Life app, and then pairing a water leak sensor by removing its battery insulation tab and triggering it with water.

4.3. Pair Water Leak Sensors with Gateway

  1. Open Sensor Cover: Gently open the cover of each water leak sensor.
  2. Remove Insulation Sheet: Locate and remove the insulation sheet from the battery compartment. This activates the batteries.
  3. Initiate Pairing: Press the button on the sensor until its LED blinks.
  4. Add Sensor in Smart Life App:
    • Open the "Smart Life" app and navigate to the LoRa gateway homepage.
    • Click "Search new device" or "Add Devices".
    • Follow the in-app instructions to connect the sensor to your gateway.
Diagram showing the internal components of the water leak sensor, including AAA batteries, horn, and detection points

Image: Internal view of the water leak sensor, highlighting the battery compartment for two AAA batteries, the horn, and the detection points for drips and leaks.

5. Operating Instructions

5.1. Sensor Placement

  • Place the LoRa gateway in a central location within your home, ensuring it is connected to your router and has a stable Wi-Fi connection.
  • Position the water leak sensors in areas prone to water leaks or drips, such as under washing machines, beneath sinks, in pipe gaps, basements, bathrooms, kitchens, or near water heaters.
Diagram showing optimal placement of water leak sensors in various rooms of a house, connected to a central gateway

Image: Illustrates the long transmission distance capability, showing sensors placed in a kitchen, bathroom, and baby room, all connected to the gateway.

Diagram showing the LoRa gateway inside a house and a sensor outside a garage, demonstrating the 2000ft/600m range

Image: Visual representation of the 2000ft/600m long-range transmission, with the gateway inside a house and a sensor detecting a leak outside a garage.

5.2. Leak Detection and Alerts

  • The sensors are equipped with two sensitive probes on the top for detecting dripping water and four on the bottom for detecting leaks.
  • Upon detecting water (as shallow as 0.3 mm) or drips, the sensor will trigger a 120dB local siren and send instant notifications to your smartphone via the Smart Life app.
  • The drainage channels at the bottom of the sensor are designed to speed up the detection process, allowing for alerts in as little as 0.1 seconds.
Images showing water leak sensors detecting water on a countertop and under a sink, with text 'Dripping and Leaking Alert'

Image: Demonstrates the sensor's ability to detect both dripping water (from above) and leaking water (from below), providing an extra-sensitive alert.

Smartphone displaying a 'Flooding Alarm' notification from the water leak sensor

Image: A smartphone showing a "Flooding Alarm" notification from the water leak sensor, indicating instant app alerts.

6. Maintenance

6.1. Battery Replacement

  • Each water leak sensor is powered by two AAA batteries.
  • The Smart Life app will notify you when the battery level is low, prompting you to replace them.
  • To replace batteries:
    1. Gently open the sensor cover.
    2. Remove the old AAA batteries.
    3. Insert new AAA batteries, ensuring correct polarity.
    4. Close the sensor cover securely.
  • The sensors are designed for ultra-low power consumption, providing up to 1 year of battery life.

6.2. Cleaning and Care

  • The sensors have an IP66 waterproof rating, making them resistant to splashes and humidity. However, avoid prolonged submersion.
  • Wipe the sensors and gateway with a soft, dry cloth as needed. Do not use harsh chemicals or abrasive cleaners.
  • Ensure the detection probes on the sensors are kept clean and free from debris to maintain optimal performance.

7. Troubleshooting

7.1. Gateway Cannot Connect to Router

  • Proximity: Ensure your mobile phone and the gateway are close to the router during the connection process.
  • Pairing Mode: The gateway should automatically enter pairing mode upon first installation (indicator light flashing). If not, press and hold the gateway button for 5 seconds until the blue LED blinks.
  • Wi-Fi Frequency: Confirm that your mobile phone is connected to a 2.4 GHz Wi-Fi network. The system does not support 5 GHz Wi-Fi.

7.2. Sensor Cannot Connect to the Gateway

  • Proximity: Ensure the sensor is near the gateway when attempting to pair.
  • Battery Activation: Verify that the insulation sheet has been removed from the sensor's battery compartment.
  • Signal Quality: Check the network signal strength for the sensor within the Smart Life app. Ensure it is in good condition. You can trigger the water immersion sensor alarm to check signal strength.

7.3. Cannot Receive Notifications or Alarm Sound

  • Gateway Connection: Check if the gateway is properly connected to your router and if your router has an active internet connection.
  • App Settings: Review the sensor's settings page in the Smart Life app to ensure that appropriate alarm functions and notifications are enabled.
  • Phone Notifications: Ensure that notifications for the Smart Life app are enabled in your phone's system settings.

8. User Tips

Based on common user experiences, here are some tips for optimal use:

  • When setting up, ensure both the gateway and sensors are within reasonable range of your 2.4GHz Wi-Fi network for initial pairing, even though LoRa provides extended range afterwards.
  • Regularly check the battery status of your sensors via the Smart Life app to avoid unexpected power loss.
  • Test your sensors periodically by placing them in a small amount of water to confirm they are functioning correctly and sending alerts.
  • Consider placing sensors in less obvious areas like behind toilets or under dishwashers, as these are common leak points.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official LINCUKOO website or contact the seller directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.