1. Introduction
Thank you for purchasing the GGBEE USB LED Tornado Night Light. This unique lamp creates a captivating tornado lighting effect with color-changing capabilities, perfect for enhancing the ambiance of any room. Designed for quiet operation and ease of use, it serves as an ideal decorative piece or a creative gift. Please read this manual thoroughly before use to ensure proper setup and operation.

2. Package Contents
Upon opening your package, please ensure all the following items are present:
- 1 x GGBEE USB LED Tornado Night Light Unit
- 1 x Bag of Decorative Beads (often referred to as 'fish')
- 1 x USB Type-C Power Cable
- 1 x User Manual (this document)

3. Setup Instructions
Follow these steps to set up your Tornado Night Light:
- Unpack: Carefully remove the lamp unit and all accessories from the packaging.
- Open Lid: Gently open the top cover of the lamp.
- Check Propeller: Confirm that the internal propeller is correctly positioned and free from any obstructions.
- Add Decorations: Place the provided decorative beads (or 'fish') into the lamp's cylinder.
- Fill with Water: Fill the cylinder with pure water. Distilled or purified water is recommended to prevent mineral buildup and ensure clear operation. Do not overfill; leave a small gap from the top.
- Close Lid: Securely close the top cover.
- Connect Power: Connect the USB Type-C power cable to the lamp's Type-C interface and plug the other end into a 5V 1A USB power source (e.g., a wall adapter, computer USB port, or power bank). The device will automatically turn on.


4. Operating Instructions
The GGBEE Tornado Night Light is controlled by a single multi-function button located on the base:
- Power On/Off: Long press the multi-function button to turn the lamp on or off.
- Change Static Color: Single click the button to cycle through the 7 static lighting colors.
- Switch Dynamic Mode: Double click the button to switch between the 2 dynamic lighting modes.


5. Maintenance and Care
To ensure the longevity and optimal performance of your Tornado Night Light, please observe the following:
- Water Quality: Always use pure water (distilled or purified) to fill the lamp. Impurities in the water can cause the internal propeller to jam or lead to cloudy water over time.
- Cleaning: When cleaning the lamp, ensure the base unit does not come into contact with water. Water ingress into the base can damage the internal circuitry. Use a soft, damp cloth to wipe the exterior of the cylinder and base.
- Water Replacement: It is recommended to replace the water periodically (e.g., every 1-2 months) to maintain clarity and prevent algae growth.
- Storage: If storing the lamp for an extended period, empty the water, clean the cylinder, and allow it to dry completely before reassembling.
6. Troubleshooting
If you encounter any issues with your Tornado Night Light, please refer to the following common problems and solutions:
- Lamp does not turn on:
- Ensure the USB Type-C cable is securely connected to both the lamp and the power source.
- Verify that the power source (e.g., USB adapter) is functioning correctly and providing 5V 1A output.
- Try a different USB cable or power source.
- Ensure you are performing a 'Long Press' on the multi-function button to power on.
- Tornado effect is weak or not forming:
- Check if the water contains impurities. Impurities can obstruct the propeller. Empty, clean, and refill with pure water.
- Ensure the propeller is correctly positioned and not jammed.
- Verify the water level is appropriate (not too low or too high).
- Lights are not changing color/mode:
- Ensure you are using the correct button press: 'Single Click' for static color change, 'Double Click' for dynamic mode change.
- Unusual noise from the lamp:
- The lamp features a brushless motor for quiet operation. If you hear unusual noise, check for any obstructions or impurities in the water that might be interfering with the propeller.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | SC-015 |
| Brand Name | GGBEE |
| Material | ABS, PC, Acrylic |
| Input Voltage | 5V |
| Input Current | 1A |
| Power Source | DC |
| Interface | Type-C (Plug & Play) |
| Light Source | LED bulbs (Included) |
| Lighting Modes | 7 Static Colors + 2 Dynamic Modes |
| Motor Type | Brushless (Zero Noise) |
| Wattage | 0-5W |
| Luminous Flux | <60 |
| Length | 20cm |
| Dimensions (approx.) | 8cm (Diameter) x 21.5cm (Height) |
| Shape | Round |
| Power Generation | Switch |
| Item Type | Night Lights |
| Certification | CE, EMC, ROHS |
| Batteries Required | No |
| Smart Device | No |


8. User Tips
- For the most vibrant and clear tornado effect, operate the lamp in a dimly lit or dark room.
- Experiment with different water levels (within reasonable limits) to see if it affects the tornado's intensity or appearance.
- Consider adding a tiny drop of dish soap (non-foaming) to the water to reduce surface tension, which can sometimes enhance the tornado effect.
- If the decorative beads clump together, gently shake the lamp to redistribute them.
9. Warranty and Support
For specific warranty information, please refer to the terms provided by your retailer or contact the seller directly. Keep your proof of purchase for any warranty claims.
A digital version of this user manual may be available for download. Please check the product page or contact customer support for the PDF document: User Manual (PDF).