1. Introduction
Thank you for choosing the Twin Earphone Open In-ear Type HIFI Bass 2in1 Headset. This manual provides essential information for setting up, operating, and maintaining your new headset. Please read it thoroughly before use to ensure optimal performance and longevity of your device.
This headset offers a unique 2-in-1 design, providing both open-ear clip-on headphones and miniature in-ear sleep headphones. It features HIFI bass, low-latency for gaming, HD call quality with ENC noise cancellation, and a digital display for electric quantity.
2. Package Contents
Please check the package for the following items:
- User Manual
- Charging case
- Charging Cable
- Open-ear clip-on earbuds (1 pair)
- In-ear sleep earbuds (1 pair)
3. Specifications
| Feature | Specification |
|---|---|
| Model Name | B47 |
| Bluetooth Version | 6.0 |
| Support Protocols | HFP V1.7; HSP V1.2; A2DP V1.3; AVRCP V1.6 |
| Earbuds Charging Current | DC5V-25mA |
| Charging Case Current | DC5V-1A |
| Earbuds Charging Time | 1 hour |
| Charging Case Charging Time | 2 hours |
| Music Playback Time | Approx. 3-4 hours (single listening), 4-5 hours (60% volume) |
| Total Endurance (with charging case) | Up to 32 hours |
| Transmit Distance | > 10m (accessible) |
| Earbuds Battery Capacity | 30mAh/3.7V |
| Charging Case Battery Capacity | 400mAh/3.7V |
| Frequency Response Range | 20Hz-20KHz |
| Earphone Rated Consumption Current | 10mA |
| Weight (Earbuds) | Approx. 2.5g (Sleep model), 4g (Earclip) |
| Net Weight (Electric Cabin) | Approx. 38.5g |
| Material | Metal, PC, PVC, ABS |
| Driver Diameter | 10mm |
| Total Harmonic Distortion | 0.1% |
| Impedance Range | Up to 32 Ω |
| Sensitivity | 98dB |
| Active Noise-Cancellation | Yes |
| Voice Assistant Built-in | Yes |
| Waterproof | Yes |
| With Microphone | Yes |
| Control Button | Yes |
| Volume Control | Yes |
| Charging Method | Charging case (Type-C) |
4. Setup
4.1 Initial Charging
Upon receiving your headset, it is recommended to fully charge the earbuds and the charging case. Connect the charging cable to the Type-C port on the case and a suitable power source. The digital display on the case will indicate the charging status.
Key point: Plug in the data cable to charge the Bluetooth earphones as soon as you receive them, and use them again after they are fully charged, which can prolong the lifespan of the Bluetooth earphones. Do not use super fast charging with a current of 2A or above to avoid damaging the circuit chip due to excessive current. Need to use the supporting data cable for charging, can not use the fast charger.
4.2 Pairing Instructions
The first time using Bluetooth earphones, you need to pair the left and right ears first. Follow these steps:
- Open the upper cover of the charging compartment.
- Take out both the left and right earbuds. Both earbuds will flash the power on light once.
- Wait for 8-10 seconds for the earbuds to automatically pair with each other.
- On your mobile phone, open the Bluetooth settings.
- Search for available devices and find the corresponding Bluetooth name (e.g., "OWS" or "TWS").
- Click on the device name to connect.
- If one side cannot be connected, or if there are two main ears, you need to cancel the pairing connection of the connected earphones and phones. Put both the left and right ears into the charging compartment and switch the phone on and off again. Follow the pairing method to pair and then connect with your phone.
5. Basic Function Operation
The headset features touch controls for various functions:
- Power on: Automatically turn on the phone when the earphone is removed from the charging case.
- Shut down: Enter the charging compartment and close the lid to shut down.
- Voice assistant: Press 3 times multifunction key on any side length.
- Pause/Play: Click the multifunction key on any side.
- Next song: Press the secondary ear 2 times.
- Previous song: Press the main ear 2 times.
- Volume up: Press the secondary ear 2 times.
- Reduce volume: Press the main ear 2 times.
- Answering phone calls: In the incoming call state, click the multifunction key on any side.
- Hanging up the phone: In the call state, click the multifunction key on either side.
- Reject call: In the incoming call state, press the multifunction key on any side of the phone.
- Call status: During a Bluetooth call, the main and auxiliary phones are off. Hang up the call: Press any earphone once during a call.
- Reject: Long press any earphone during incoming call status.
- Low battery warning tone: Report low battery warning when the battery voltage is lower than 3.4V (report once every 60 seconds).
- Shutdown voltage: The battery voltage is lower than 3.2V to shut down immediately.
6. Maintenance
6.1 Charging
- Ensure the charging case is regularly charged to maintain the earbuds' battery life.
- Charging completed: 4.2V fully charged, automatically shut down after full charge.
- Use the provided Type-C charging cable. Avoid using fast chargers with current 2A or above to prevent damage.
6.2 Cleaning and Storage
- Wipe the earbuds and charging case with a soft, dry cloth.
- Avoid exposing the device to extreme temperatures, humidity, or corrosive substances.
- Store the headset in its charging case when not in use to protect it and conserve battery.
6.3 Battery Life Management
- The charging case can charge the earbuds approximately 3 times.
- The total endurance with the charging case is up to 32 hours.
- If one earbud runs out of power, you can place it back in the charging case and use the other earbud, effectively extending listening time.
7. Troubleshooting
- Earbuds not connecting/pairing: If the earbuds fail to pair or connect, ensure they are fully charged. Place both earbuds back into the charging case, close the lid, then reopen and try the pairing process again. Ensure your phone's Bluetooth is on and clear any previous connections to 'OWS' or 'TWS'.
- One earbud not charging to 100%: Check for any debris in the charging contacts on both the earbud and the case. Ensure the earbud is seated correctly in the charging slot.
- Earbuds randomly pausing/disconnecting: This could be due to low battery. Ensure both earbuds are sufficiently charged. Also, try re-pairing the earbuds with your device.
- Inconsistent sound (shifting left to right): Try resetting the earbuds by placing them back in the case and then re-pairing. Ensure there are no obstructions between the earbuds and your device.
- Sleep state: If there is no connection after pairing, the earbuds will automatically shut down in 3 minutes.
8. User Tips
- Removing Earbuds: Some users find it difficult to pull the earbuds out of the case. Be gentle and find a comfortable grip.
- Comfort for Side Sleepers: The in-ear sleep buds might be felt when lying on your side. Adjust their position for maximum comfort.
- Battery Life Variation: Actual battery life can vary based on usage (e.g., volume level). While rated for 3-4 hours of single listening, intensive use might reduce this.
- Sound Quality Differences: The sound quality, particularly bass, may differ between the in-ear and clip-on earbud types. The in-ear type generally offers better sound isolation and bass.
- Dual-Device Connection: The headset can connect to two devices simultaneously, but it typically works with one active audio stream at a time.
9. Warranty and Support
This product is covered by a standard manufacturer's warranty. For detailed warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.
For technical support or inquiries, please contact the seller or manufacturer through the provided contact channels.