UGREEN GPS11

Contents

UGREEN Smart Tag User Manual

Model: GPS11 (CM520)

1. Introduction

The UGREEN Smart Tag is a compact and versatile item tracker designed to help you keep track of your belongings. Utilizing Apple's Find My network, it allows you to locate items such as keys, bags, earbuds, and luggage with ease. The Smart Tag features a built-in speaker for audible alerts and an 18-month replaceable battery.

UGREEN Smart Tag 4-Pack, Works with Apple Find My
UGREEN Smart Tag, compatible with Apple Find My network.
Key features of UGREEN Smart Tag: Apple Find My, Privacy, 18-Month Battery, Siri compatibility
Key features include Apple Find My compatibility, built-in privacy, an 18-month replaceable battery, and Siri integration.

2. Setup

2.1 Initial Power On

  1. Remove the insulation film from the Smart Tag. The product will automatically power on with a beep and an indicator light.

2.2 Pairing with Apple Find My App

The Smart Tag works exclusively with Apple devices. Ensure your device meets the system requirements:

  • iOS 14.5 or above
  • iPadOS 14.5 or above
  • macOS 11 or above

A single iPhone/iPad can pair with up to 32 trackers. MacBook can view the tracker location in the Find My App but cannot be used for initial pairing.

  1. Ensure your iOS device's Bluetooth is enabled and your device is connected to the internet.
  2. Bring the Smart Tag close to your iPhone or iPad.
  3. Open the built-in "Find My" app on your Apple device.
  4. In the Find My app, tap on the "Items" tab.
  5. Select "Add Item", then choose "Other Supported Item".
  6. Follow the on-screen instructions in the app to complete the pairing process and name your tag.
Steps for initial pairing of Smart Tag with Find My app
Initial pairing steps: Remove insulation, open Find My app, add item, connect.

2.3 Adding Another Smart Tag

To add additional Smart Tags after the first one:

  1. Open the "Find My" app on your Apple device.
  2. In the "Items" tab, tap the "+" icon, then select "Add Other Item".
  3. Click "Connect" and name the new tag as prompted.
Steps for adding another Smart Tag to Find My app
Steps for adding subsequent Smart Tags to the Find My app.

3. Operating the Smart Tag

3.1 Locating Items

The Smart Tag offers two primary ways to locate your items:

  • Find Nearby: When your item is within Bluetooth range (typically 10-20 meters, depending on the environment), you can use the "Play Sound" feature in the Find My app to make the Smart Tag emit a sound, helping you pinpoint its exact location.
  • Find Nearby feature showing sound alert on phone and tag beeping
    Use "Play Sound" to find nearby items by sound.
  • Find Far Away: If your item is out of Bluetooth range, the Find My network leverages millions of Apple devices worldwide to anonymously detect your Smart Tag's location. You can view its most recent location on a map in the Find My app and get directions to it.
  • Find Far Away feature showing map and directions to a lost item
    View your item's location on a map and get directions when far away.

3.2 Left Behind Alert

Receive instant notifications on your Apple device if you leave your tagged item behind and it disconnects from your device's Bluetooth range. This feature helps prevent loss by alerting you when you're too far from your valuables.

Left Behind Alert notification on a phone screen
Receive alerts when you leave your items behind.

3.3 Anti-tracking Function

The Smart Tag includes an anti-tracking feature. If an unknown Smart Tag is traveling with you, your Apple device will automatically detect it and send you an alert, preventing unwanted tracking.

Anti-tracking notification on a phone screen
The anti-tracking feature alerts you to unknown tags traveling with you.

3.4 Sharing Your Smart Tag

You can share your Smart Tag with up to six other people, allowing friends and family to help track your items. This is useful for shared belongings or family use.

Image showing how to share a Smart Tag with multiple users on a map
Share your Smart Tag's location with up to six people.

3.5 Siri Integration

For hands-free convenience, you can use Siri to locate your items. Simply say, "Hey Siri, find my [item name]" (e.g., "Hey Siri, find my keys").

4. Maintenance

4.1 Battery Replacement

The Smart Tag is powered by a replaceable CR2032 coin battery, offering up to 18 months of battery life. To replace the battery:

  1. Turn the back cover of the Smart Tag counterclockwise to open it.
  2. Remove the old CR2032 battery.
  3. Insert a new CR2032 3V Lithium battery with the positive polarity (+) facing up.
  4. Turn the back cover clockwise to close and secure it.
Diagram showing steps to replace the CR2032 battery in the Smart Tag
Follow these steps to replace the CR2032 battery.

WARNING:

  • Keep batteries out of reach of children and pets. Swallowing a button battery can cause severe injury or death.
  • Do NOT dispose of batteries in household trash or incinerate them. Recycle according to local regulations.
  • Use only CR2032 3V coin batteries for replacement. Using other types may cause damage or injury.
  • Do not force discharge, recharge, or heat batteries.
  • Ensure batteries are installed correctly according to polarity.
  • Do not mix old and new batteries, or different brands/types of batteries.
  • Always completely secure the battery compartment. If it is not secure, stop using the product and keep batteries away from children.

5. Troubleshooting

  • Failed to add tag to Find My app:
    • Ensure your iPhone/iPad meets system requirements (iOS 14.5+, iPadOS 14.5+), Bluetooth is on, and your network is working properly.
    • Factory Reset: While powered on, quickly press the button 5 times. After hearing 3 consecutive beeps, press and hold the button for 6 seconds until 2 beeps are heard. Then open the Find My App and follow the steps to add it again.
  • Tracker not updating its location in a timely manner:
    • The tracker broadcasts a signal to nearby Apple devices, which then upload data to the Find My network. This process does not support real-time updates and depends on the density of nearby Apple devices and Apple's system update frequency. In areas with low Apple device coverage, updates will be slower.
  • UGREEN Smart Tag cannot play sound:
    • The sound alert function works best when close to the iPhone (typically 10-20 meters). Sound cannot be played at long distances, but updated location information is still available via the map.
  • How to rebind an already added tracker to another iPhone:
    • Method 1 (If original iPhone and tracker are nearby): Use the original iPhone's Find My App to select "Remove Item". The tracker can then be paired with the new iPhone.
    • Method 2 (If original iPhone and tracker are far apart): First, use the original iPhone to remove the tracker in the Find My App. Then perform a factory reset on the Smart Tag (quickly press the button 5 times, hear 3 beeps, then press and hold for 6 seconds until you hear 2 beeps). The tracker can now be used with the new iPhone.

6. Specifications

Feature Detail
Model Code CM520
Model Name Smart Tag
Bluetooth® Version 5.2
Bluetooth Protocol BLE
Battery Type CR2032
Battery Life Up to 18 months
System Requirements iOS 14.5+, iPadOS 14.5+, macOS 11+
Compatible Devices iPhone, iPad, Mac
Applications Apple's built-in 'Find My' App
Product Positioning Range Global Positioning (GPS)
Operating Frequency 2.400GHz-2.4835GHz
Frequency Response 20Hz~20KHz
Material Body shell/middle frame: PC+ABS, Bottom Case: Stainless Steel
Waterproof No
Certification FCC, CE
Dimensions 3.19cm (diameter) x 0.85cm (thickness)
Package Retail Box
Table of specifications and dimensions diagram for the Smart Tag
Detailed specifications and dimensions of the UGREEN Smart Tag.

7. Warranty and Support

The UGREEN Smart Tag comes with a 1-year warranty.

For further assistance or detailed information, please refer to the official user manual PDF: View User Manual (PDF).

8. User Tips

  • First Use: Always remember to remove the insulation film from the battery compartment before first use to activate the Smart Tag.
  • Apple Devices Only: The UGREEN Smart Tag is designed exclusively for Apple devices and is not compatible with Android phones or tablets.
  • Location Update Frequency: Location updates are not real-time. The frequency depends on the density of Apple devices in the vicinity and Apple's network update schedule.
  • Sound Range: The audible alert (Play Sound) feature works best within close Bluetooth range (approx. 10-20 meters). For items further away, rely on the map location.
  • Firmware Updates: For the best user experience and to ensure optimal performance, check for and install any available firmware updates for your Smart Tag via the Find My app.

© 2024 UGREEN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.