Introduction
Thank you for choosing the Thermalright PEERLESS VISION 360 ARGB BLACK AIO CPU Liquid Cooler. This all-in-one liquid cooling system is designed to provide efficient cooling for your CPU while offering customizable ARGB lighting and a functional display screen. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your product.
Safety Information
CAUTION:
- All liquid coolers carry a potential risk of leakage. Perform all operations carefully.
- Thoroughly inspect the water cooling unit for any signs of damage before installation.
- If any damage is found, do not proceed with installation. Contact customer service immediately.
- Ensure all cables are connected correctly to avoid electrical damage.
Package Contents
Please verify that all components are present before beginning installation:
- PEERLESS VISION 360 ARGB Liquid Cooler (Radiator, Pump/Waterblock with Display, and Fans pre-installed)
- Mounting Brackets for Intel and AMD Sockets
- Backplates for Intel Sockets
- Screws and Standoffs for various CPU sockets
- Thermalright TL-M12Q Fans (3x)
- Standard TF7 Thermal Grease
- Water Pipe Buckles
- USB Data Cable
- User Manual (this document)
- Product Warranty Card
Specifications
| Component | Specification |
|---|---|
| Model Number | PV360 ARGB BLACK |
| Type | CPU All In One Liquid Cooler |
| Radiator Size | 360mm |
| Radiator Dimensions | 397mm x 120mm x 27mm |
| Heatsink Material | Copper & Aluminum |
| Water Block Dimensions | 81mm x 79mm x 67.6mm |
| Pump Interface | 4-pin PWM |
| Pump Speed | 3000 RPM ±10% (MAX) |
| Screen Size | 3.95 inches |
| Screen Resolution | 480x480 |
| Fan Model | TL-M12Q |
| Fan Dimensions | 124mm x 120mm x 25mm |
| Fan Speed | 2000 RPM ±10% (MAX) |
| Fan Static Pressure | 2.21 mmH₂O (MAX) |
| Fan Airflow | 74.19 CFM (MAX) |
| Operating Noise | ≤28.2 dB(A) |
| Fan Interface | 4-pin PWM |
| Fan Bearing | S-FDB Bearing |
| Lighting Interface | +5V 3-pin ARGB |
| Thermal Grease | Standard TF7, Thermal Conductivity: 12.8 W/mK |
| Supported CPU Sockets | Intel: LGA 1851, 1700, 1150, 1151, 1155, 1156, 1200, 2011-3, 2066 AMD: AM4, AM5 |
| RGB Support | A-RGB |
| Certification | CE |
Installation Guide
Follow these steps carefully to install your Thermalright PEERLESS VISION 360 ARGB liquid cooler.
1. Prepare the Waterblock
- Carefully remove the protective cap from the waterblock cold plate before mounting.
2. Install the Backplate (Intel Sockets)
For Intel LGA 115X/1700/1851 sockets, adjust the Intel backplate according to your specific socket type. Refer to the diagrams below for correct positioning.
3. Waterblock Mounting
Follow the specific instructions for your CPU socket type:
- Intel LGA115X/1200 Installation: Position the waterblock over the CPU and secure it with the appropriate screws and standoffs.
- Intel LGA1700/1851 Installation: Use the designated mounting hardware for LGA1700/1851 sockets.
- Intel LGA20XX Installation: Follow the specific steps for LGA20XX mounting.
- AMD AM4/AM5 Installation: Utilize the provided AMD mounting brackets and hardware.
4. Fan & Radiator Mounting
Mount the radiator and fans in your PC case. Ensure proper airflow direction for optimal cooling. The fans are designed for wireless splicing, simplifying cable management.
5. Waterblock/Fan Guide & Cable Connections
- Connect the 4-pin PWM pump interface cable to your motherboard's CPU_FAN or AIO_PUMP header.
- Connect the 4-pin PWM fan interface cables from the fans to your motherboard's fan headers or a fan controller.
- Connect the +5V 3-pin ARGB lighting interface cable to your motherboard's ARGB header for synchronized lighting effects.
- Connect the USB data cable from the waterblock to an available USB 2.0 header on your motherboard for display functionality and software control.
Operating Instructions
PEERLESS VISION Display User Guide (Software)
The integrated 3.95-inch IPS display provides real-time system monitoring and customization options. To utilize its full potential, software installation is required.
- Ensure the USB data cable is connected from the waterblock to a motherboard USB interface.
- Download the control software from the official Thermalright support website: https://www.thermalright.com/support/download/
- Unzip the downloaded setup file and run the installer by double-clicking the setup executable.
- After installation is complete, double-click the software shortcut icon to launch the application.
- All functions on the LCD, including real-time data display, customization, and on/off controls, are managed by this software. The software is configured to auto-start with your operating system and run in the background. Please do not manually close the program.
- In case of an unknown error or display malfunction, you can perform a hard restart of the display by unplugging and re-plugging the USB cable connected to the waterblock.
Maintenance
- Dust Cleaning: Regularly clean the radiator fins and fan blades with compressed air to prevent dust buildup, which can impede cooling performance.
- Fan Inspection: Periodically check fan operation to ensure they are spinning freely and quietly. Replace any noisy or malfunctioning fans.
- Tubing and Connections: Inspect the tubing and connections for any signs of leaks, kinks, or damage. Ensure all fittings are secure.
- Thermal Paste: While not frequently required, if you ever remove the waterblock from the CPU, clean off the old thermal paste and apply a fresh layer of high-quality thermal paste before reinstallation.
Troubleshooting
- No Power/No Display:
- Check all power connections (pump, fans, ARGB) to the motherboard.
- Ensure the USB data cable is securely connected to both the waterblock and the motherboard header.
- Try re-plugging the USB cable to reset the display.
- Poor Cooling Performance:
- Verify that the waterblock is making proper contact with the CPU. Re-seat if necessary, ensuring even pressure.
- Check if thermal paste was applied correctly.
- Ensure fans are spinning and oriented correctly for optimal airflow through the radiator.
- Clean any dust buildup from the radiator fins.
- Check pump speed in the software; ensure it's operating at expected RPM.
- ARGB Lighting Not Working/Synchronizing:
- Ensure the +5V 3-pin ARGB cable is correctly connected to the motherboard's ARGB header.
- Check your motherboard's ARGB software or BIOS settings to ensure the header is enabled and configured.
- Verify connections for wireless splicing fans.
- Software Not Detecting Cooler/Display:
- Ensure the USB data cable is properly connected.
- Reinstall the control software from the official website.
- Try a different USB 2.0 header on the motherboard.
User Tips
- Cable Management: Take advantage of the wireless splicing fans to minimize cable clutter for a cleaner build and improved airflow.
- Display Customization: Explore the software's options for personalized DIY themes and dynamic backgrounds to make your system unique.
- Monitoring: Regularly check the display for CPU and GPU temperatures to ensure your system is running within safe operating limits, especially during heavy loads.
- Fan Curves: Adjust fan curves in your motherboard BIOS or the cooler software to balance cooling performance and noise levels according to your preference.
Warranty and Support
Thermalright provides a five-year warranty for this product, which includes compensation for leakage. Please retain your proof of purchase and the product warranty card for any warranty claims.
For technical support, driver downloads, or further assistance, please visit the official Thermalright support website:
https://www.thermalright.com/support/download/
