LAUSEVENFJ HD300

Contents

LAUSEVENFJ HD300 Smart Watch User Manual

Explore the Stronger, Challenge New Horizons

Introduction

This manual provides detailed instructions for the LAUSEVENFJ HD300 Smart Watch. Please read it carefully to ensure proper use and to fully utilize all features of your device. The measurement results from this product are for reference only and should not be used for medical purposes or as a basis for self-diagnosis or treatment. Always follow your doctor's instructions.

LAUSEVENFJ HD300 Smart Watch with various features highlighted

Image: LAUSEVENFJ HD300 Smart Watch showcasing AMOLED display, LED flashlight, 3ATM waterproof, 24/7 health monitoring, barometer, and GPT function.

Package Contents

Please check the box for the following items:

  • Watch host (including strap) x1
  • Wireless charger x1
  • Instruction manual x1

Setup Guide

Initial Setup

  1. Open the strap box and follow the steps to connect the strap to the Watch.
  2. Wear the watch and press and hold the switch button to turn it on.
  3. Pair with your phone by scanning the QR code. Follow the steps on the screen to set it up.
  4. For charging, attach the charger to the back of the case magnetically.
Diagram showing watch features like health monitoring, AMOLED screen, 3ATM, robust core, multiple movement modes, barometric altitude, 400mAh battery, and Bluetooth call.

Image: Key features and specifications of the HD300 Smart Watch.

App Download and Connection

To fully utilize your smart watch, you need to download and connect it to the companion app.

1. Download the "FitCloudPro" APP

You can download the "FitCloudPro" APP on your mobile phone and install it by:

  • Scanning the QR code provided in this manual.
  • Scanning the QR code displayed on your watch.
  • Directly searching for "FitCloudPro" in your mobile phone's APP store.
QR code for quick connection to the FitCloudPro app.

Image: QR code to quickly download the FitCloudPro app.

Note: After receiving the watch, if it does not turn on, please charge it for more than 10 minutes before performing the watch activation.

2. Connect the Smart Watch

Ensure Bluetooth is enabled on your phone and location services are active if the app requires it.

  • Scan Code Binding: Enter the "FitCloudPro" APP, click on "Device" -> "Add Device" -> "Scan Code Binding" (scan the QR code on the watch).
  • Manual Connection: Enter the "FitCloudPro" APP, click on "Device" -> "Add Device" -> "Search Devices". After finding the watch, slide down to "Settings" -> "System" -> "System Information" in the Control Center to find the corresponding Bluetooth name and MAC address, then click "Connect".

3. Call Bluetooth Setup

The call Bluetooth function is divided into "call audio" and "media audio" switches.

  • Call Audio: This is the Bluetooth connection switch for making calls from the watch.
  • Media Audio: This switch allows the watch to play media audio (off by default).

Important Notes for Media Audio:

  • Media audio can only be turned on when call audio has been enabled.
  • If "Media Audio" is turned on and you then turn off "Call Audio", the "Media Audio" switch will also turn off synchronously.
  • If "Call Audio" is turned on, the "Media Audio" switch will be opened simultaneously.

Operating Instructions

General Watch Operation

  • Alipay Interface: Double-click the screen on the dial page to enter the Alipay interface.
  • Dial Page: Long press the screen to enter the dial selection page. Swipe left or right to switch between dials. Confirm your selection by tapping. The system presets 14 dial pages, with the last one being "customized" which changes with the APP dial market and customized dial download settings.
  • Menu Page: Press the side knob from the dial page to enter the menu page. After entering, press the side knob twice consecutively to enter menu switching. A single press returns to the main dial page.
  • Function Page: Tap an application icon on the menu page to access its function. Swipe right to return, and a single press of the side knob returns to the main dial page.
Image showing the watch displaying a flashlight function, illuminating a dark area.

Image: The watch's flashlight function in use.

Specific Functions

  • Alarm Clock: Set single-mode alarms, cycle alarms, or up to 5 alarms after connecting to the APP.
  • Stopwatch: Click start to begin timing, pause to stop, and reset to clear. Up to 99 data records can be saved.
  • Breathing Training: Choose between 1 or 2-minute sessions. Follow on-screen icons to inhale (zoom in) and exhale (zoom out).
  • Voice Assistant: Provides intelligent help for quick software access and information queries.
  • Women's Health: After connecting to the APP, enable the women's health reminder in the app to view relevant information on the watch.
  • Weather: Displays real-time weather temperature and conditions when connected to the APP.
  • Sports Modes: Includes walking, running, cycling, mountaineering, swimming, yoga, elliptical machine, basketball, and more. Tap an icon to start an exercise session.
  • Calculator: Supports numerical input up to 7 digits and results up to 8 digits. "------" is displayed if the result exceeds the limit.
  • Do Not Disturb (DND): Enable to silence notifications during rest periods.
  • Frequent Contacts: Add up to 10 frequently used contacts in the app for automatic synchronization to the watch.
  • Calendar: Displays the current year, month, and day.
  • Messages: Receive and save up to 15 recent message pushes from the APP.
  • Settings: Includes screen display options (dial switching, brightness, screen time, wrist-to-wake), language, vibration intensity, menu style, battery, QR code, and system information.
  • Music Control: Control mobile music playback (pause, start, volume, skip songs) when connected to the APP.
  • Sedentary Reminder: Enable in the APP to set start/end times and DND periods for reminders to move.
  • Sleep Monitoring: Displays daily sleep status. Data updates daily and syncs with the APP.
  • Watch Dial Switching: Long press the main interface for 2 seconds, then swipe left/right to choose a dial.
  • Sports Data: View steps, distance, and calories recorded. Set daily targets in the APP.
  • Drinking Water Reminder: Enable in the APP to set start/end times and reminder intervals.
  • Find Mobile Phone: Tap this function on the watch to make your connected phone ring. If not connected, the watch will indicate so.
  • Control Center: Quick access to functions like DND, wrist-to-wake, brightness, settings, find phone, power saving mode, and system info.
  • Altitude: Real-time measurement of the current environment's altitude.
Image showing the watch's smart assistant features including Bluetooth call, information push, and SOS emergency function.

Image: Smart assistant features: Bluetooth call, information push, and SOS emergency.

Image showing a person running outdoors with the watch, illustrating multiple movement modes.

Image: Multiple movement modes for various sports activities.

Features and Specifications

Diagram showing product dimensions and parameters, including screen size, type, Bluetooth, chip, battery, charging, memory, compatibility, waterproof grade, and packing list.

Image: Product dimensions and detailed parameters.

Technical Specifications
FeatureSpecification
ModelHD21 (HD300)
Brand NameLAUSEVENFJ
CPU ModelAB5691
Screen TypeAMOLED
Display Size1.43 inch
Resolution466x466
Touch ScreenYes
Bluetooth Version5.4
RAM128 MB
ROM128 MB
Battery Capacity400mAh
Battery Life7 days (typical use), 15 days (standby)
Charging MethodWireless charging
Waterproof Grade3ATM (recreational diving, not for hot water)
CompatibilityAndroid 5.0 and above, iOS 10.0 and above
App NameFitCloudPro
Metrics MeasuredHeart Rate Monitor, Women's Health Monitoring, Blood Oxygen Monitor, Sleep Monitor, Blood Pressure Monitor
Activity TrackedSteps Tracker, Distance Tracker, Calorie Tracker, Activity Tracker
GPSNo built-in GPS (may use connected phone's GPS)
Voice AssistantYes (AI GPT function)
Weight27g
Wristband Size260mm
LanguagesEnglish, Russian, Spanish, Polish, Portuguese, Turkish, Italian, French, German, Korean, Japanese, Ukrainian, Hebrew, Dutch, Arabic, Indonesian, Greek
Image showing battery life details: 15 days standby, 7 days endurance, 400mAh capacity, and wireless charging.

Image: Battery performance and charging method.

Care and Maintenance

  • Charging Environment: Do not charge the watch in a humid or watery environment.
  • Cleaning: Regularly clean the back of the watch and the surface of the wireless charger with a clean flannel cloth. This ensures full contact between the watch and the charger for normal charging.
  • Power Adapter: This product does not include a power adapter. For safety, use a computer USB interface or a power adapter with an output of no more than 5V 1A when charging. Purchase power adapters from reputable channels to avoid using low-quality or fake adapters.
  • Water Resistance: The watch has a 3ATM waterproof rating, suitable for recreational diving. However, it should not be used for deep diving or prolonged immersion in water. It is also not protected against hot water, as water vapor can affect the watch's functionality.

Troubleshooting (Frequently Asked Questions)

  • The watch cannot be turned on: Please press and hold the power button for more than 3 seconds. If it still doesn't turn on, the battery may be low and needs to be charged immediately.
  • Bluetooth is not connected or cannot be connected:
    1. Please try to restart the watch and reconnect.
    2. Please try to restart your phone's Bluetooth and reconnect.
    3. Do not connect your phone to other Bluetooth devices at the same time.
  • Inaccurate manual measurement of heart rate/blood pressure/blood oxygen:
    1. Ensure the watch sensor is in correct contact with your skin during measurement.
    2. For individuals with darker skin or more arm hair, enable "Enhanced measurement" in the App (Device -> Enhanced measurement).
  • Sleep data is not accurate enough:
    1. Sleep monitoring simulates self-recognized sleep and wake times; ensure the device is worn correctly.
    2. Wearing it too late or falling asleep while wearing it may lead to errors.
    3. Sleep data is not monitored during the day. The default sleep monitoring period is from 9:30 PM to 12:00 PM the next day.
  • GPS Functionality: Please note that this watch does not have built-in GPS, despite some marketing materials or function lists potentially mentioning it. Any GPS-related features rely on the connected smartphone's GPS.

User Tips

  • Language Support: The watch supports a wide range of languages, including English, Russian, Spanish, Polish, Portuguese, Turkish, Italian, French, German, Korean, Japanese, Ukrainian, Hebrew, Dutch, Arabic, Indonesian, and Greek. The app also supports many languages.
  • iOS Compatibility: The watch works well with iOS devices running iOS 10.0 and above.
  • Sturdiness: Users have noted the watch feels detailed and sturdy.
  • App Installation: Ensure the "FitCloudPro" app is installed and granted necessary permissions for full functionality.

Warranty and Support

The company reserves the right to revise the content of this manual without prior notice. Some functions may differ in the corresponding software version, which is considered normal.

For further assistance or detailed FAQs, please refer to the "My" -> "FAQ" section within the FitCloudPro application.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.