1. Product Overview
The XMSJ Anti-lose Tracker is a smart tag designed to help you locate your valuable items using Apple's built-in Find My app. This 2-pack device is compatible with iOS devices (iPhone, iPad) and offers features like item left behind alerts, one-click sound search, and device sharing.
2. Setup and Pairing
Follow these steps to set up and pair your XMSJ Anti-lose Tracker with your iPhone or iPad.
2.1. Turn on Pairing Broadcast
- Insert the batteries or remove the insulating sheet from the tracker.
- Listen for two "beep" sounds. The device will automatically power on and activate pairing broadcast.
- The pairing broadcast lasts for 2 minutes. If no pairing is completed within 2 minutes, the broadcast will automatically turn off.
2.2. Pair Device with Apple Find My App
- Open Apple's self-built-in "Find My" App on your iPhone or iPad.
- Bring the XMSJ Anti-lose Tracker close to your iPhone.
- In the "Find My" app, tap the "Items" tab at the bottom of the screen.
- Select the "+" icon and click on "Add Other Item".
- For devices with the words 'Locator Tag', tap 'Connect'.
- Fill in "Name Item" to name your device (e.g., "Keys", "Luggage") and select an emoticon to represent it.
- Agree to register the device with your Apple ID.
- Tap 'Finish' to successfully pair the device.
3. Operating Instructions
3.1. Locating Items (One-Click Call Search)
Once paired, you can easily find your items:
- Open the "Find My" app on your iPhone or iPad.
- Select the item you wish to locate from the "Items" tab.
- Tap "Play Sound" to make the tracker emit a sound, helping you pinpoint its location.
- You can also activate Siri to help you locate your items with one-tap search in the app.
3.2. Item Left Behind Alert
The tracker features an alert system to notify you if you leave an item behind:
- When your item is out of approximately 15 meters range from your phone, a pop-up alert will notify you that it has been left behind.
3.3. Share Device
You can share your device with friends, allowing up to 5 devices to simultaneously search for an item.
3.4. Enable Lost Mode
If an item is truly lost, you can enable Lost Mode:
- Open Apple's "Find My" app, click on "Items" at the bottom of the screen, then click on the item's name.
- Under "Lost Mode", click "Enable".
- Follow the instructions on the screen and click 'Continue' to enter your contact phone or email settings.
- After clicking "Next" to check the information, please click "Enable" again to complete the setting.
4. Maintenance and Troubleshooting
4.1. Removing a Device
To remove a device from your Find My app:
- Open Apple's "Find My" app, click on "Items" at the bottom of the screen, and then click on the item's name.
- Find "Remove Item" at the bottom of the list and tap "Remove" to complete the operation.
4.2. Entering Sleep Mode
If the device does not connect to a paired device within 2 minutes after enabling pairing broadcast, it will automatically enter sleep mode after emitting three beeps ("beep", "beep", "beep").
To exit sleep mode, remove and reinsert the battery. The device will then re-enter pairing broadcast mode.
4.3. Restore Factory Settings
To restore the device to factory settings:
- Remove and reinsert the battery three consecutive times, with an interval of ≤3 seconds between each removal/reinsertion. Exceeding this time limit will invalidate the operation.
- Upon hearing a long "beep" tone, the product has successfully restored to factory settings.
- After restoring factory settings, the product will automatically enter pairing broadcast mode.
5. Specifications
| Feature | Specification |
|---|---|
| Brand Name | XMSJ |
| Origin | Mainland China |
| Certification | CE |
| Waterproof | No |
| Range | Other (approx. 15 meters for 'left behind' alert) |
| High-concerned chemical | None |
| Rated Voltage | 3V |
| Rated Current | 175 mAh |
| Package Length | 15 cm |
| Package Width | 12 cm |
| Package Height | 2 cm |
| Package Weight | 0.059 kg |
6. Safety Information
6.1. General Safety Statement
According to the management method of low-power electric wave radiation motor:
- Article 12: Without permission, any company, firm, or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
- Article 14: The application of low-power frequency electric machinery shall not affect navigation safety nor interfere with legal communication. If interference is found, the service will be suspended until improvement is made and the interference no longer exists.
6.2. Battery Safety
KEEP BATTERIES OUT OF REACH OF CHILDREN
- Keep in original package until ready to use.
- Call a local poison control center for treatment information. (e.g., Australia: 13 11 26, Canada: 1-800-268-9017 (Ontario), 1-800-567-8911 (BC), 1-800-463-5060 (Quebec), US: 800-498-8666). Verify suitable emergency call numbers for your country.
- Do not use if the compartment is not secure.
- Dispose of used button batteries promptly and safely. Flat batteries can still be dangerous.
- Risk of fire and burns.
- Do not recharge, disassemble, heat (-20°C to +70°C), or incinerate.
7. User Tips
- For optimal performance, ensure your iPhone's Bluetooth is always on.
- Regularly check the battery status in the Find My app to avoid unexpected disconnections.
- Attach the tracker securely to items you frequently misplace, such as keys, wallets, or pet collars.
- Utilize the 'Item Left Behind Alert' feature for crucial items to prevent accidental loss.
- Consider using the sharing feature for family members to help locate shared items like car keys or a family pet.
8. Support and Documents
For further assistance or detailed documentation, please refer to the official user manual PDF:
For security and privacy information, please refer to the Security & Privacy information provided by AliExpress.