XMSJ Portable Locator

Contents

XMSJ Portable Locator for iOS Find My App

User Instruction Manual

1. Introduction

The XMSJ Portable Locator is a smart anti-loss device designed to help you keep track of your valuable items. It seamlessly integrates with the Apple Find My network, allowing you to locate your belongings using your iPhone or iPad. This device is ideal for tracking keys, bags, luggage, and even pets.

XMSJ Portable Locator with two protective covers and two locators, showing compatibility with iOS Find My app on an iPhone and iPad.
The XMSJ Portable Locator works with the iOS Find My app. It includes two protective covers and two locators. Note: Only for iPhone system, Not for Android!!!

2. Safety Information

Please read and understand the following safety guidelines before using the device:

  • Battery Safety: Keep batteries out of reach of children. Store in original packaging until ready to use. Dispose of used button batteries promptly and safely, as flat batteries can still be dangerous.
  • Risk of Fire and Burns: Do not recharge, disassemble, heat (beyond -20°C to +70°C), or incinerate the device or its battery.
  • Compartment Security: Do not use the device if the battery compartment is not secure.

Regulatory Compliance:

  • Article 12: Without permission, no company, firm, or user shall alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
  • Article 14: The application of low-power frequency electric machinery shall not affect navigation safety or interfere with legal communication. If interference is found, the service will be suspended until improvement is made and the interference no longer exists.

3. Setup

3.1. Turn on Pairing Broadcast

  1. Insert the battery or remove the insulating sheet.
  2. After hearing two "beep" sounds, the device will automatically power on and activate pairing broadcast.

*Pairing broadcast lasts for 2 minutes. If no pairing is completed within 2 minutes, the broadcast will automatically turn off.

3.2. Pair Device with iOS Find My App

  1. Open Apple's built-in "Find My" App on your iPhone or iPad.
  2. Bring the XMSJ Portable Locator close to your iPhone.
  3. Tap the "Items" tab at the bottom of the screen.
  4. Select "+" and then click on "Add Other Item".
  5. For devices with the words 'Locator Tag', tap 'Connect'.
  6. Fill in "Name Item" to name your device and select an emoticon.
  7. Agree to register the device with your Apple ID.
  8. Tap 'Finish' to pair successfully.
Video demonstrating the pairing process and how to use the Find My app to locate the device and make it ring.

4. Operating Instructions

4.1. Item Left Behind Alert

The device can notify you if you leave an item behind. When your item is out of approximately 15 meters range from your phone, a pop-up alert will appear on your device.

iPhone screen showing a 'Time Sensitive' notification: 'Your water bottle has been left behind. The item has been detected as not being with you. Last recorded near Jefferson Square.'
Visual representation of the 'Item Left Behind' alert on an iPhone.

4.2. One-Click Call Search (Play Sound)

If you misplace your item nearby, you can make the locator play a sound to help you find it. The hook design allows for direct attachment to keychains, making it easy to track a single key.

  1. Open the "Find My" app.
  2. Select the item you wish to locate.
  3. Tap "Play Sound" to make the locator emit a sound.

You can also activate Siri with a one-tap search in the app to help locate your items.

Image showing a hand tapping 'Play Sound' in the Find My app on an iPhone, with a keychain locator emitting 'di di di' sounds.
Using the 'Play Sound' feature in the Find My app to locate a missing key.

4.3. Enable Lost Mode

If your item is lost, you can enable Lost Mode to get notified when it's found by another Apple device in the Find My network.

  1. Open Apple's built-in "Find My" app.
  2. Click on "Items" at the bottom of the screen, then click on the item's name.
  3. Under "Lost Mode", click "Enable".
  4. Follow the instructions on the screen and click 'Continue' to enter your contact phone or email settings.
  5. After clicking "Next" to check the information, click "Enable" again to complete the setting.

4.4. Share Device

The XMSJ Portable Locator supports sharing with friends. Up to 5 devices can simultaneously search for an item.

Diagram showing a central locator tag with keys, connected to five different iPhones, illustrating the device sharing feature. Note: Only for iPhone system, Not for Android!!!
Share your locator with up to 5 friends for collaborative item tracking. Note: Only for iPhone system, Not for Android!!!

5. Maintenance

5.1. Entering Sleep Mode

If the device does not connect to a paired device within 2 minutes after enabling pairing broadcast, it will automatically enter sleep mode after emitting three beeps ("beep", "beep", "beep").

To exit sleep mode, remove and reinsert the battery. The device will then re-enter pairing broadcast mode.

5.2. Restore Factory Settings

To restore the device to factory settings:

  1. Remove and reinsert the battery three consecutive times (with an interval of ≤3 seconds between each removal/reinsertion). Exceeding this time limit will invalidate the operation.
  2. Upon hearing a long "beep" tone, the product has successfully restored to factory settings.

After restoring factory settings, the product will automatically enter pairing broadcast mode.

6. Troubleshooting

Problem Solution
Device does not pair within 2 minutes. The device will automatically turn off pairing broadcast. Remove and reinsert the battery to re-enter pairing broadcast mode and try pairing again.
Device is unresponsive or not functioning correctly. Try restoring factory settings (see Section 5.2). Ensure the battery is correctly inserted and has sufficient charge.
Cannot hear the locator's sound. Ensure the device is within range and that your phone's volume is up. Check the battery level.

7. Specifications

Feature Detail
Brand Name XMSJ
Compatibility iOS Find My App (iPhone, iPad)
Waterproof No
Rated Voltage 3V
Rated Current 175 mAh
Dimensions (approx.) 85mm (Height) x 39mm (Width) x 9.91mm (Thickness)
Origin Mainland China
Certification CE
Diagram showing the dimensions of the XMSJ Portable Locator: 85mm (3.34in) height, 39mm (1.53in) width, and 9.91mm (0.39in) thickness.
Product dimensions for the XMSJ Portable Locator.

8. User Tips

  • Versatile Use: The lightweight and convenient design makes it suitable for various items like keys, bags, backpacks, luggage, and even pet collars.
  • Find My Network: Leverage the vast Apple Find My network to locate your belongings, even if they are far away.
  • Siri Integration: Use Siri for quick item searches by activating it through the one-tap search in the Find My app.
  • Battery Life: The device features a long battery life, reducing the frequency of battery replacement.
Image showing the XMSJ Portable Locator attached to a handbag, keys, backpack, pet collar, and luggage, demonstrating its versatility.
The XMSJ Portable Locator is a gentle, lightweight, and convenient companion for various items.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where you purchased the device. Keep your purchase records for faster service.

For information regarding battery ingestion or other emergencies, please contact your local poison control center:

  • Australia: 13 11 26
  • Canada: 1-800-268-9017 (Ontario), 1-800-567-8911 (BC), 1-800-463-5060 (Quebec)
  • US: 800-498-8666

Please verify suitable emergency call numbers for your country.

A PDF version of this user manual is available for download: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.