1. Introduction
The LECART USB Dynamic Devil Eyes Light is an innovative LED matrix panel designed to add a unique and dynamic visual element to your vehicle's windshield. Featuring dual colors (Red & White) and 11 distinct light modes, this plug-and-play device enhances your car's appearance and can be used for expressive signaling. This manual will guide you through the proper installation, operation, and care of your new Devil Eyes Light.
Video: Demonstration of the Devil Eyes Light's dynamic modes and dual-color functionality.
2. Safety Information
- Ensure the device is securely attached to prevent detachment during vehicle operation.
- Avoid obstructing the driver's view or any vehicle safety features (e.g., airbags, sensors).
- Do not attempt to modify or disassemble the LED panels or wiring.
- Ensure the USB power source provides a stable 5V output to prevent damage to the device.
- Avoid prolonged operation in extremely high temperatures, although the product is designed for high-temperature resistance.
3. Product Features
- Dual-Color Design: Features both Red and White LEDs for striking visual effects.
- Dynamic Light Modes: Offers 11 distinct light modes for personalized expression.
- Easy Installation: USB Plug & Play design with double-sided adhesive tape for quick setup.
- Universal Fit: Compatible with most cars, trucks, and SUVs.
- Durable Construction: Made from premium ABS+LED materials for long-lasting performance.
- Power Input: Operates on 5V via a standard USB port.
- High-Brightness: 151 LED chips provide clear and visible illumination.
- Versatile Use: Suitable for both interior and exterior vehicle applications.
4. Package Contents
- Devil Eyes LED Light Panels (2 units)
- USB Connection Cable (approx. 157 inches / 4 meters)
- Double-sided Adhesive Tape (2 pieces)
- User Manual (PDF, available for download at PDF Manual)
Image: Illustration of the Devil Eyes Light package contents, including the LED panels, USB cable, and adhesive tape.
5. Setup and Installation
- Prepare the Surface: Choose a clean, dry, and flat area on your car's windshield (front or rear) where you wish to install the Devil Eyes Light. Ensure the surface is free from dust, grease, or moisture for optimal adhesion.
- Apply Adhesive Tape: Peel the protective film from the double-sided adhesive tape on the back of each Devil Eyes LED panel.
- Position and Attach: Carefully position each LED panel onto the chosen area of your windshield. Press firmly for several seconds to ensure secure adhesion.
- Connect Power: Connect the USB plug of the Devil Eyes Light to a compatible 5V USB power source. This can be a car's built-in USB port, a car USB charger, or a portable power bank.
Image: Visual guide for applying the double-sided tape and connecting the device to a portable USB power source.
Image: Examples of compatible 5V USB power sources for the Devil Eyes Light.
6. Operating Instructions
The Devil Eyes Light is controlled via a single button located on the USB connector.
- Power On / Switch Modes: A short press of the control button will turn the light ON and cycle through the 11 available dynamic light modes.
- Power Off: A long press (approximately 2 seconds) of the control button will turn the light OFF.
Image: Details of the 'One Key Control' button on the USB connector.
7. Maintenance
- Cleaning: Gently wipe the LED panels with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the surface or LEDs.
- Adhesive Check: Periodically check the adhesion of the panels to ensure they remain securely attached to the windshield.
- Cable Inspection: Inspect the USB cable for any signs of wear or damage. Replace if necessary.
8. Troubleshooting
- Light does not illuminate:
- Verify that the USB cable is securely connected to a functional 5V power source.
- Ensure the control button has been short-pressed to turn the light ON.
- Check if the power source itself is working correctly.
- Light dims or flickers:
- This may indicate an unstable or insufficient power supply. Try connecting to a different USB port or power source.
- Ensure the USB connection is firm and free from debris.
- Device feels warm during operation:
- It is normal for LED devices to generate some heat. However, if the device becomes excessively hot to the touch, disconnect it immediately and contact support. Ensure proper ventilation around the device.
9. Specifications
| Feature | Detail |
|---|---|
| Model Name | Devil Eyes Light for Car Windshield |
| Item Type | Atmosphere lamp |
| Material | ABS+LED |
| Voltage | 5V |
| Item Weight | 0.15kg |
| Special Features | Dual Colors, USB Plug & Play |
| LED Chips | 151 |
| Light Modes | 11 |
| Cable Length | 157 inches (4 meters) |
| Light Unit Dimensions | Width: 6.18 inches (157mm), Height: 2.48 inches (63mm) |
| Certification | CE |
| Origin | Mainland China |
10. User Tips
No specific user tips are available from provided reviews or Q&A content.
11. Warranty and Support
This product comes with a one-year warranty. Replacement will be provided for non-man-made defects within this period. For support or warranty claims, please contact your retailer or the manufacturer directly.