1. Product Introduction
This air purifier is designed for indoor air quality improvement, adopting a multi-stage filtration system (HEPA filter + activated carbon filter + pre-filter) to effectively capture PM2.5, dust, pollen, pet dander, formaldehyde, volatile organic compounds (VOCs), smoke, and odors. With low noise operation, intelligent air quality detection, and adjustable wind speed, it provides clean, fresh air for homes, offices, bedrooms, and other enclosed spaces, creating a healthy living environment for you and your family.
2. Product Specifications
| Feature | Specification |
|---|---|
| Product Name | Desktop Air Purifier |
| Product Model | EJ-JHQ08 |
| Rated Voltage | 5V |
| Rated Power | 5W |
| Power Supply Method | Type-C direct plug |
| Coverage Area | 20-60㎡ (suitable for small to medium rooms) |
| Filtration System | 3-in-1 composite filter (Pre-filter + True HEPA H13 Filter + Activated Carbon Filter) |
| HEPA Grade | H13 |
| Function | Deodorization, Filter PM2.5 particles, remove secondhand smoke, dust, aromatherapy, blue light, and odors. |
| CADR (Clean Air Delivery Rate) | 150-300 m³/h (dust/pollen/smoke) |
| Noise Level | 25-55 dB(A) (from sleep mode to high speed) |
| Control Mode | Touch panel / Remote control / APP intelligent control (varies by model) |
| Display Functions | Air quality indicator (PM2.5 value / pollution level LED light), filter replacement reminder, timer setting (1/2/4/8 hours) |
| Product Dimension | Approx. 124.5mm (Diameter) x 189mm (Height) |
| Net Weight | 0.557 kg |
| Origin | Mainland China |
3. Component Names
- Front panel (detachable for filter replacement)
- Air inlet grille (pre-filter built-in)
- Multi-stage composite filter cartridge
- Control panel (touch-sensitive buttons: Power, Wind Speed, Timer, Mode, Child Lock)
- Air quality sensor (detects PM2.5 and pollutant concentration)
- Air outlet (top/bottom, with adjustable air direction)
- Power cord interface
- Remote control (included in applicable models)
- Non-slip base
- Filter replacement indicator light
4. Initial Setup
- Unpack the air purifier and remove all packaging materials (including plastic films on the filter and surface).
- Open the front panel, take out the filter cartridge, and remove the protective plastic bag from the filter (do not wash or modify the filter).
- Reinstall the filter cartridge correctly and close the front panel firmly.
- Place the purifier on a flat, dry surface, away from walls, curtains, or other obstacles (keep at least 30cm of space around for air circulation).
- Insert the power cord into a grounded socket.
5. Basic Operation
A. Power On/Off
- Press the "Power" button for 2 seconds to turn on/off the device. The air quality indicator will light up when powered on.
- If not operated for 12 hours, the purifier will automatically shut down (energy-saving mode).
B. Wind Speed Adjustment
- Press the "Wind Speed" button to switch between modes: Sleep (lowest speed) → Low → Medium → High → Turbo (highest speed).
- The corresponding indicator light will illuminate to confirm the selected speed.
C. Intelligent Mode (Auto Mode)
- Press the "Mode" button to switch to Auto Mode. The purifier will automatically adjust the wind speed based on the detected air quality:
- Green light: Excellent air quality (PM2.5 < 5µg/m³) → Sleep/Low speed
- Yellow light: Moderate pollution (35µg/m³ ≤ PM2.5 < 75µg/m³) → Medium speed
- Red light: Severe pollution (PM2.5 ≥ 75µg/m³) → High/Turbo speed
D. Timer Setting
- Press the "Timer" button repeatedly to set the auto-shutoff time: 1h → 2h → 4h → 8h → Cancel.
- The timer indicator will show the selected duration.
E. Child Lock
- Press and hold the "Child Lock" button for 3 seconds to activate/deactivate the lock.
- When locked, all touch buttons and remote control functions (except Power) will be disabled to prevent misoperation by children.
6. Remote Control Operation (Applicable Models)
- Ensure the remote control has installed batteries (2× AAA, not included).
- Point the remote control at the air quality sensor area (top/front of the purifier) within 5 meters.
- Use the same function buttons as the control panel to operate (Power, Wind Speed, Mode, Timer, Child Lock).
7. Cleaning & Maintenance
A. Regular Cleaning
- Pre-filter Cleaning: Remove the front panel and take out the pre-filter (washable). Rinse with clean water, air-dry completely (do not expose to direct sunlight), and reinstall. Clean every 1-2 weeks (frequency depends on air quality).
- Surface Cleaning: Wipe the purifier surface and control panel with a dry, soft cloth. Do not use water, alcohol, or abrasive cleaners to avoid damaging the surface.
- Air Inlet/Outlet Grille: Use a soft brush to remove dust from the grilles every 2 weeks.
B. Filter Replacement
- The filter replacement indicator will turn red when the filter is saturated (usually after 6-12 months of use, depending on usage frequency and air quality).
- Turn off the purifier and unplug the power cord before replacing the filter.
- Open the front panel, take out the old filter, and dispose of it according to local waste management regulations.
- Install the new original filter cartridge correctly (ensure the air flow direction matches the mark on the filter).
- Close the front panel, plug in the power, and press and hold the "Filter Reset" button (or "Mode" button) for 3 seconds to reset the indicator.
C. Storage
- If not used for a long time, unplug the power cord, clean the pre-filter and surface, and store the purifier in a cool, dry place (avoid humidity and direct sunlight).
- Remove the filter cartridge, seal it in a plastic bag, and store it separately to prevent moisture and contamination.
8. Troubleshooting
This section provides solutions to common issues you might encounter. If the problem persists, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Purifier does not turn on | No power, power cord not properly connected, or device malfunction. | Ensure power cord is securely plugged into a grounded socket. Check power outlet. If problem persists, contact support. |
| Weak airflow or no purification effect | Blocked air inlet/outlet, dirty pre-filter, or saturated main filter. | Check for obstructions around air inlet/outlet. Clean the pre-filter. Replace the main filter if the replacement indicator is red. |
| Unusual noise | Foreign object inside, unstable placement, or fan issue. | Ensure purifier is on a flat, stable surface. Check for any loose objects. If noise persists, contact support. |
| Filter replacement indicator remains red after filter change | Filter reset not performed. | Press and hold the "Filter Reset" button (or "Mode" button) for 3 seconds to reset the indicator. |
9. User Tips
- For optimal performance, ensure the air purifier is placed in a central location within the room, away from walls and furniture that might obstruct airflow.
- Regularly check the air inlet and outlet grilles for dust accumulation to maintain efficient operation.
- Consider using aromatherapy scented pads for an enhanced environment, placing them into the filter cover before turning on the machine.
- While the device has a low noise mode, for maximum air purification in highly polluted environments, utilize higher fan speeds during times when noise is less of a concern.
(Note: No specific user reviews or Q&A were provided to generate additional tips.)
10. Safety Precautions (Must Read)
- Keep the purifier out of reach of children and pets. Do not allow children to climb on or play with the device.
- Do not use the purifier in wet environments (e.g., bathrooms, kitchens with heavy steam) to avoid electric shock.
- Keep the purifier away from water sources, flammable, and explosive materials (e.g., gasoline, alcohol, aerosol cans).
- Unplug the power cord before cleaning or replacing the filter. Do not touch the internal components with hands or metal tools.
- Use only the original filter cartridge. Using non-original filters may reduce purification efficiency and cause safety hazards.
- Do not block the air inlet or outlet during operation, as this may overheat the device and damage the motor.
- If the power cord is damaged, stop using it immediately and replace it with a qualified cord provided by the manufacturer.
- Do not disassemble, modify, or repair the purifier by yourself. Contact the after-sales service for professional maintenance if there is a malfunction.
- This product is for indoor household and office use only. Do not use it outdoors or in industrial environments.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Do not attempt to repair the device yourself, as this may void your warranty.
A user manual in PDF format is available for download: User Manual (PDF)