1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ABRIGHT Car Interior LED Lights. These high-quality LED bulbs are designed to replace original halogen bulbs, offering superior brightness and a modern aesthetic for your vehicle's interior. Please read this manual carefully before installation and use to ensure proper function and safety.
2. Warning & Safety Information
- Do not operate while driving to ensure driving safety.
- Avoid contact with high-temperature areas to prevent burns.
- For indoor use only; not intended for exterior vehicle lighting.
3. Package Contents
The package includes a set of LED bulbs tailored for specific Hyundai Santa Fe models. Please verify the contents against your vehicle's model year:
For Santa Fe SM (2000-2006) - 8PCS
- Dome Light (2 pieces)
- Vanity Mirror Light (2 pieces)
- Glove Box Light (1 piece)
- Trunk Light (1 piece)
- License Plate Light (2 pieces)
For Santa Fe CM (2007-2012) - 13PCS
- Map Light (2 pieces)
- Dome Light (2 pieces)
- Vanity Mirror Light (2 pieces)
- Glove Box Light (1 piece)
- Door Light (2 pieces)
- Footwell Light (2 pieces)
- License Plate Light (2 pieces)
For Santa Fe DM (2013-2017) - 10PCS
- Map Light (2 pieces)
- Dome Light (2 pieces)
- Vanity Mirror Light (2 pieces)
- Glove Box Light (1 piece)
- Trunk Light (1 piece)
- License Plate Light (2 pieces)
For Santa Fe TM (2018-2021) - 9PCS
- Map Light (2 pieces) (Not needed for skylight models)
- Dome Light (1 piece) (Not needed for skylight models)
- Vanity Mirror Light (2 pieces)
- Glove Box Light (1 piece) (For 2018-2020/2021 models)
- Trunk Light (1 piece)
- License Plate Light (2 pieces)
For Grand Santa Fe (2013-2019) - 9PCS
- Map Light (2 pieces)
- Dome Light (1 piece)
- Vanity Mirror Light (2 pieces)
- Glove Box Light (1 piece)
- Trunk Light (1 piece)
- License Plate Light (2 pieces)
4. Specifications
| Attribute | Value |
|---|---|
| Model Name | Car Interior LED Lights |
| Item Type | Atmosphere lamp, reading light |
| Voltage | 12 V |
| Material | LED |
| Brightness | 300% Brighter than original bulb (white color) |
| Lifetime | Over 50,000 hours |
| Warranty | 2 years |
| Canbus Compatibility | 100% No Error |
| Installation | Plug and Play |
| Item Weight | 0.1kg |
| Package Length | 11 cm |
| Package Width | 9 cm |
| Package Height | 4 cm |
| Package Weight | 0.055 kg |
5. Installation Instructions
Follow these steps to install your ABRIGHT Car Interior LED Lights:
- Turn off the vehicle's power supply before installation.
- Carefully open the interior dome light cover or the cover of the light you are replacing. A pry tool (often included) can assist with this.
- Remove the original halogen bulb. Be cautious as the bulb may be hot.
- Insert the new LED bulb into the light slot and secure it in place.
- If the LED light does not illuminate, remove it, rotate it 180 degrees, and reinsert it. LED bulbs are polarity-sensitive.
- Ensure the metal pin holder is snug to ensure a tight fit for the bulb.
- Replace the light cover.
Watch the installation demo video for a visual guide:
Video: Demonstration of LED bulb installation in a car's interior light fixture.
Visual comparison of original halogen vs. ABRIGHT LED interior lighting:
Image: Side-by-side comparison showing the significant brightness improvement from original halogen bulbs to ABRIGHT LED bulbs in a car interior.
6. Operation
After successful installation, simply power on your vehicle to illuminate the new LED interior lights. The lights are designed for instant-on functionality.
7. Precautions
- Turn off the vehicle's power supply before installation.
- Avoid use in humid environments.
- Do not disassemble or modify the lamp arbitrarily.
8. Feature Highlights
- Energy-efficient: Consumes less power than traditional bulbs.
- Long service life: Up to 50,000 hours of operational life.
- Uniform illumination: Soft, flicker-free light output.
- Super bright: All bulbs are high quality and super bright.
- Canbus Error Free: 100% compatible with your vehicle's system, preventing ECU errors.
- Easy Installation: Plug and Play design for direct fit in original sockets.
- Perfect Heat Resistance: Designed for optimal heat dissipation.
9. Troubleshooting
- Light does not turn on: Check whether the power connection is secure and normal. Ensure the bulb is inserted with the correct polarity (try rotating 180 degrees).
- Low brightness: The LED strip may be improperly positioned. Re-seat the bulb firmly.
- Heat generation: Some heat is normal for LED components and is not a cause for concern.
10. User Tips
- Fitting: While designed for direct fit, some users have noted that certain bulbs (e.g., turn signals or specific models like the 2019 Santa Fe TM) might require gentle force or slight adjustment to fit securely.
- License Plate Lights: For some specific models, the included license plate light might differ from the original. Verify compatibility before attempting installation.
- Polarity Check: If a newly installed LED bulb does not light up, remove it, flip it 180 degrees, and reinsert it. LED bulbs are polarity sensitive and will only work when inserted correctly.
11. Warranty & Support
Your ABRIGHT Car Interior LED Lights come with a 2-year warranty. If you encounter any issues or require further assistance, please contact the seller or manufacturer directly for support.
For additional documentation, you may refer to the User Manual (PDF).