1. Introduction
This document provides instructions for the Focus Mini Wireless PIR Motion Sensor (Model MC-565R-868MHz). This sensor is designed to detect human body movement within a protected area. It features advanced digital processing for high immunity to false alarms and outstanding stability. The sensor performs regular auto-testing and reports its condition to the alarm system for full supervision. It also includes pet immunity for animals up to 25kg.
This sensor is compatible with various alarm panels, including ST-IIIB, ST-VGT, HA-VGW, HA-VGT, ST-IVB, ST-VB, ST-V, ST-IV, FC-300, ST-III, FC-7664, FC-7688, FC-7540, and FC-7504.
2. Package Contents
- 1x Wireless Pet Friendly PIR Motion Sensor (includes 1x CR123A 3.0V Lithium Battery)
- Mounting bracket
- Screws and wall plugs
- User Manual (this document)
3. Setup and Installation
Follow these steps to set up and install your PIR motion sensor:
- Battery Installation: Open the sensor casing to access the battery compartment. Insert the provided CR123A 3.0V Lithium Battery, ensuring correct polarity.
- Mounting Location: Choose a suitable location for the sensor. For optimal performance, it is recommended to mount the sensor at a height of 2 to 2.3 meters from the floor. Avoid direct sunlight, heat sources, or areas with strong air currents that might cause false alarms.
- Attach Mounting Bracket: Secure the mounting bracket to the desired wall or surface using the provided screws and wall plugs.
- Attach Sensor: Slide the PIR sensor onto the mounted bracket, ensuring it is firmly in place.
- Testing: After installation, perform a walk test to ensure the sensor detects movement within the desired area and communicates with your alarm panel.
4. Operating Instructions
The Focus Mini Wireless PIR Motion Sensor operates by detecting infrared radiation emitted by moving bodies. When motion is detected within its coverage area, it transmits a signal to the connected alarm panel.
- Detection: The sensor has a 110° wide-angle detection and a range of approximately 12 meters at 25°C.
- Pet Immunity: The advanced pet-immunity recognition technology differentiates between human intruders and pets up to 25kg, minimizing false alarms caused by household animals.
- Supervision: The sensor regularly performs auto-testing and reports its status to the alarm system, ensuring continuous functionality and full supervision.
5. Maintenance
- Cleaning: Gently wipe the sensor's lens and casing with a soft, dry cloth to remove dust and debris. Avoid using abrasive cleaners or solvents.
- Battery Replacement: The sensor includes a low-voltage check function. When the battery is low, the sensor will report its condition to the alarm system. Replace the CR123A 3.0V Lithium Battery promptly to ensure continuous operation.
- Tamper Switch: The sensor is equipped with a tamper switch. Ensure the sensor is securely attached to its mounting bracket to prevent tamper alerts.
6. Troubleshooting
- False Alarms:
- Ensure the sensor is not facing direct sunlight, heat sources (e.g., radiators, vents), or strong air currents.
- Verify that pets exceeding 25kg are not entering the detection area.
- Check for any moving objects (e.g., curtains, balloons) within the detection zone.
- No Detection:
- Check the battery level and replace if necessary.
- Ensure the sensor is properly powered on and communicating with the alarm panel.
- Verify that the detection area is clear and not obstructed.
- Confirm the sensor is mounted at the recommended height (2-2.3m).
- Connectivity Issues:
- Ensure the sensor is within the effective wireless range of your alarm panel.
- Check for potential sources of wireless interference (e.g., large metal objects, other wireless devices).
- Re-pair the sensor with your alarm panel if necessary (refer to your alarm panel's manual for pairing instructions).
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | MC-565R-868MHz |
| Product Name | Wireless PIR Motion Sensor |
| Wireless Frequency | 868MHz |
| Detection Range | 12 meters @ 25°C |
| Detection Angle | 110 degrees |
| Pet Immunity | Up to 25kg |
| Power Source | 1x CR123A 3.0V Lithium Battery |
| Dimensions (approx.) | 95mm x 43mm (width not specified, assuming length x width) |
| Chip Technology | Self-designed MASK chip with DMT technology |
| Optics Design | Spherical lens and sealed optics (anti-interference) |
| Features | Tamper supervised, low-voltage check, status report function |
| Certification | CE |
| Origin | Mainland China |
8. User Tips
- For optimal pet immunity, ensure the sensor is mounted at the recommended height and that pets do not jump onto furniture within the detection zone.
- Regularly check the sensor's status via your alarm panel to ensure it is functioning correctly and to be aware of low battery warnings.
- When testing, walk across the detection pattern rather than directly towards or away from the sensor for more accurate results.
9. Warranty and Support
For warranty information and technical support, please contact the seller, Cuke Security Store, directly. Keep your purchase records for any warranty claims.
A detailed user manual in PDF format may be available. Please refer to the seller's product page or contact them for access to the PDF manual: User manual (PDF)