1. Introduction
The XMSJ Smart Tag Wireless Locator is a compact and efficient device designed to help you track and locate your important items using Google's Find Hub application. This manual provides detailed instructions on how to set up, operate, maintain, and troubleshoot your Smart Tag.
Key Features:
- Locator functionality
- One-click search (voice prompt)
- Replaceable battery
- Lost Reminder
- Works with Android devices (Android 9.0 and above)

Figure 1: Smart Tag features overview
2. Safety Information
Please read and understand all safety information before using this product.
Battery Safety:
- KEEP BATTERIES OUT OF REACH OF CHILDREN.
- Keep in original package until ready to use.
- Dispose of used button batteries promptly and safely. Flat batteries can still be dangerous.
- Risk of fire and burns.
- Do not recharge, disassemble, heat (-20°C to +70°C), or incinerate.
- Do not use if the battery compartment is not secure.
General Safety:
- Without permission, no company, firm, or user shall alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery.
- The application of low power frequency electric machineries shall not affect navigation safety nor interfere with legal communication. If interference is found, the service will be suspended until improvements are made and the interference no longer exists.
3. Setup and Pairing
3.1. Turn on Pairing Broadcast
- Insert the battery or remove the insulating sheet.
- After hearing two "beep" sounds, the device will automatically power on and activate pairing broadcast.
- The pairing broadcast lasts for 2 minutes. If no pairing is completed within 2 minutes, the broadcast will automatically turn off.
3.2. Pair Device with Android Phone
The Smart Tag is compatible with most Android phones running Android 9.0 and above. It is not compatible with iPhone or Huawei devices.

Figure 2: Android Compatibility

Figure 3: Official Google Authorized Listing
- Open Google's "Find My Device" or "Find Hub" application on your Android phone.
- Bring the Smart Tag device close to your Android phone.
- In the app, navigate to the "Items" tab (or equivalent section for adding devices).
- Select the option to add a new device, typically indicated by a "+" icon or "Add Other Item".
- If prompted, select the "Locator Tag" or similar option and tap "Connect".
- Fill in a "Name Item" to give your device a recognizable name and select an emoticon.
- Agree to register the device with your Google ID.
- Tap "Finish" to complete the pairing process successfully.
Video: Pairing and Setup Guide
This video demonstrates the process of pairing your Smart Tag with your Android device and navigating the Find My Device app.
4. Operation
4.1. Locating Nearby Items (Voice Prompt)
When your Smart Tag is within Bluetooth range, you can make it emit a sound to help you find your item quickly.
- Open Google's "Find My Device" or "Find Hub" app on your Android phone.
- Select the Smart Tag you wish to locate from your list of devices.
- Tap the "Play Sound" button. The Smart Tag will emit a sound, guiding you to its location.

Figure 4: Voice Prompt to Locate Items

Figure 5: One-touch Device Call
4.2. Locating Far Away Items (Map Navigation)
If your Smart Tag is outside of Bluetooth range, you can still locate it using the Google Find Hub app's map feature.
- Open Google's "Find My Device" or "Find Hub" app.
- Select the Smart Tag you are looking for.
- The app will display the last known location of your tag on a map.
- Use the map to get directions and navigate to the item's location.

Figure 6: Find Far Away Items

Figure 7: Map Navigation to Find Items
4.3. Enabling Lost Mode
If an item with your Smart Tag is lost, you can enable "Lost Mode" to help recover it.
- Open Google's "Find My Device" or "Find Hub" app.
- Click on "Items" at the bottom of the screen, then click on the name of your Smart Tag.
- Under the "Lost Mode" section, click "Enable".
- Follow the on-screen instructions and click "Continue" to enter your contact phone number or email settings.
- After clicking "Next" to review the information, click "Enable" again to complete the setting.
4.4. Sharing Your Smart Tag
You can share access to your Smart Tag with up to 5 people, allowing friends and family to help track your items.

Figure 8: Share Tag with Up to 5 People
5. Maintenance
5.1. Battery Replacement
The Smart Tag uses a replaceable battery. Refer to the safety section for battery handling precautions.
5.2. Entering Sleep Mode
If the device does not connect to a paired device within 2 minutes after enabling pairing broadcast, it will automatically enter sleep mode after emitting three "beep" sounds. To exit sleep mode, remove and reinsert the battery. The device will then re-enter pairing broadcast mode.
5.3. Restore Factory Settings
To restore the Smart Tag to factory settings:
- Remove and reinsert the battery three consecutive times.
- Ensure there is an interval of ≤3 seconds between each removal/reinsertion. Exceeding this time limit will invalidate the operation.
- Upon hearing a long "beep" tone, the product has successfully restored to factory settings.
- After restoring factory settings, the product will automatically enter pairing broadcast mode.
5.4. Removing a Device
If you wish to unpair or remove a Smart Tag from your account:
- Open Google's "Find My Device" or "Find Hub" app.
- Click on "Items" at the bottom of the screen, then click on the name of the Smart Tag you wish to remove.
- Find "Remove Item" at the bottom of the list and tap "Remove" to complete the operation.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Smart Tag does not pair. | Pairing broadcast timed out. | Remove and reinsert the battery to re-enter pairing broadcast mode. Ensure pairing is completed within 2 minutes. |
| Cannot hear the voice prompt. | Smart Tag is out of Bluetooth range or battery is low. | Move closer to the Smart Tag. Check and replace the battery if needed. |
| Smart Tag is not visible on the map. | Smart Tag is out of range or has not updated its location recently. | Ensure the Smart Tag is within range of an Android device with Google Find Hub. Check battery level. |
| Device is not compatible. | Using an unsupported phone model. | Ensure your phone is Android 9.0 or above. Not compatible with iOS or Huawei devices. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | XMSJ |
| Origin | Mainland China |
| Certification | CE |
| Waterproof | No |
| Range | Other (Bluetooth dependent) |
| Rated Voltage | 3V |
| Rated Current | 175 mAh |
| Package Dimensions (L x W x H) | 17 cm x 13 cm x 1 cm |
| Package Weight | 0.064 kg |
8. User Tips
- Always ensure your Android phone is running Android 9.0 or above for optimal compatibility and performance with the Google Find Hub app.
- Attach your Smart Tag to items you frequently misplace, such as keys, wallets, bags, or even pet collars.
- Utilize the "Play Sound" feature for quick retrieval of items that are nearby but out of sight.
- For items lost further away, rely on the map navigation feature within the Google Find Hub app to guide you to their last known location.
- Consider using the "Share Tag" feature with trusted family members or friends to allow multiple people to track important shared items.
- Regularly check the battery status of your Smart Tag within the app to ensure continuous tracking capability.

Figure 9: Protect Important Items

Figure 10: Smart Bluetooth Tracker Applications

Figure 11: Hook Design for Easy Installation
9. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through the platform where the product was purchased. Keep your purchase records for reference.
10. Frequently Asked Questions (FAQ)
Q: Is the Smart Tag waterproof?
A: No, the Smart Tag is not waterproof. Please avoid exposing it to water or extreme moisture.
Q: What kind of battery does it use?
A: The Smart Tag uses a replaceable button battery. Please refer to the safety section for proper handling and disposal.
Q: Can I use this with an iPhone?
A: No, the XMSJ Smart Tag Wireless Locator is designed to work exclusively with Android phones running Android 9.0 or above and Google's Find Hub application. It is not compatible with iOS devices.
Q: How many Smart Tags can I connect to my phone?
A: The number of Smart Tags you can connect may depend on your phone's capabilities and the Google Find Hub app. Please refer to the app's settings for specific limits.