HTBCCHB Universal

Contents

Motorcycle Handlebar Crossbar Pad User Manual

Model: Universal

1. Introduction

This manual provides essential information for the proper installation, use, and maintenance of your Motorcycle Handlebar Crossbar Pad. Designed for off-road vehicles, this colorful foam anti-collision cover helps protect riders from impacts with the handlebar crossbar.

The HTBCCHB Motorcycle Handlebar Crossbar Pad is a non-original modified part, crafted from environmentally friendly and wear-resistant materials. It is designed to be compatible with a wide range of motorcycles, dirt bikes, ATVs, pit bikes, and scooters.

Black Motorcycle Handlebar Crossbar Pad with 'HTBCCHB' logo
Figure 1: HTBCCHB Motorcycle Handlebar Crossbar Pad (Black)

2. Safety & Warnings

Please read all safety information carefully before installation and use.

  • Handlebar Compatibility: This product is only suitable for handlebar cross tubes with a diameter of 22mm (1-1/8"). Forcefully installing it on handlebars of other sizes may cause the protective pad to fall off and lose its protective function. Cross-specification use is strictly prohibited.
  • Secure Fixation: Ensure the pad is firmly fixed. Use Velcro straps to securely wrap the protective pad around the handlebar crossbar. Always check fixation before riding to prevent detachment during high-speed driving.
  • Temperature and Chemical Exposure: Keep the protective pad away from high-temperature components such as exhaust pipes and engines. Avoid contact with chemicals like gasoline and engine oil, as these can cause plastic shell deformation and sponge aging.
  • Regular Inspection: Before each ride, inspect the protective pad for any cracks, damage, or exposed sponge. If any abnormalities are found, replace the pad immediately to maintain its cushioning and protective function.
  • Children's Supervision: This product is designed for adult off-road use. Children using vehicles equipped with this pad require adult supervision to prevent secondary injury from the pad slipping or falling off.
  • Auxiliary Protection: This product provides auxiliary cushioning protection and is not a substitute for professional off-road chest protectors, helmets, or other safety equipment. Always wear a full set of professional protective equipment when riding.

3. Product Overview

The handlebar crossbar pad is designed to provide an additional layer of safety and style to your off-road vehicle. It features a durable outer shell and a foam core for impact absorption.

Features:

  • Material: Environmentally friendly and wear-resistant materials.
  • Design: Split U-shaped design for easy installation.
  • Impact Absorption: Rigid plastic shell disperses impact force.
  • Color Options: Available in black, red, blue, yellow, green, and orange.
Multiple colored handlebar pads stacked, showing various color options
Figure 2: Available color options for the handlebar pad.

4. Specifications

Attribute Value
Product Name Square Handlebar Bar Pad
Model Universal
Brand Name HTBCCHB
Motobike Make Universal
Compatible Handlebar Diameter 22mm (1-1/8")
Package Length 20 cm
Package Width 15 cm
Package Height 10 cm
Package Weight 0.13 kg
Origin Mainland China

5. Setup and Installation

Follow these steps to correctly install your handlebar crossbar pad:

  1. Clean Handlebars: Before installation, thoroughly clean the surface of the handlebar cross tube. Remove any sediment, dirt, or oil to ensure a clean and smooth contact surface for optimal adhesion and stability.
  2. Position Protective Pad: Place the protective pad in the middle of the handlebar horizontal tube. Ensure it is aligned with the center position of the handlebar for balanced protection.
  3. Secure with Straps: Use the integrated Velcro straps to securely wrap the protective pad around the handlebar crossbar. Make sure the straps are tight enough to prevent the pad from being loose or displaced during operation.
  4. Check Fixation: After installation, gently shake the protective pad by hand. Confirm that it is firmly fixed and does not shake or show any risk of falling off.

6. Maintenance

To ensure the longevity and effectiveness of your handlebar crossbar pad, follow these maintenance guidelines:

  • Cleaning: Wipe the pad with a damp cloth to remove dirt and debris. Avoid using harsh chemicals or abrasive cleaners that could damage the material.
  • Protection from Elements: Store your vehicle in a cool, dry place when not in use to protect the pad from prolonged exposure to direct sunlight, extreme temperatures, and moisture.
  • Chemical Avoidance: As mentioned in the safety warnings, keep the pad away from high-temperature components and corrosive chemicals like gasoline and engine oil.
  • Regular Inspection: Perform a visual inspection before each ride, checking for any signs of wear, tear, cracks, or sponge exposure.

7. Troubleshooting

If you encounter any issues with your handlebar crossbar pad, consider the following:

  • Pad is Loose or Falls Off:
    • Verify that the handlebar cross tube diameter is 22mm (1-1/8"). Incorrect sizing will prevent proper fixation.
    • Ensure the Velcro straps are securely and tightly fastened around the crossbar.
    • Re-check the installation steps to confirm correct positioning and fixation.
  • Pad Shows Signs of Damage (Cracks, Exposed Foam):
    • The pad's protective function may be compromised. Replace the pad immediately to ensure continued safety.
    • Review usage conditions to avoid exposure to high temperatures or corrosive chemicals that could cause premature damage.

8. User Tips

  • Verify Fit: As noted by other users, ensuring the correct handlebar diameter (22mm or 1-1/8") is crucial for a perfect fit and optimal performance.
  • Aesthetic Customization: Take advantage of the multi-color options to match your bike's aesthetic or add a personal touch while enhancing safety.

9. Manufacturer & Support Information

For any inquiries or support, please contact the manufacturer or their authorized representative:

Manufacturer:

Yongkang Hongxu Trading Co., Ltd.
Changcheng Village, Yongkang Economic Development Zone,
Jinhua City, Zhejiang Province Room 302, 3rd Floor, No. 66 Jinbi Road
Email: 841996743@qq.com
Phone: 86-13018090962

EU Authorized Representative:

MJCM SARL
78 avenue des Champs Elysees Bureau 326
Email: mjcm190928@gmail.com
Phone: 33-767213611

A PDF version of the user manual is available for download at this link.

© 2024 HTBCCHB. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.