M5Stack C126-Echo

Contents

M5Stack ATOM EchoS3R Smart Speaker Dev Kit User Manual

Model: C126-Echo

1. Introduction

The M5Stack ATOM EchoS3R is a compact, programmable IoT voice interaction controller designed for intelligent voice control and human-computer interaction scenarios. Powered by the ESP32-S3-PICO-1-N8R8 main control chip, it supports 2.4GHz Wi-Fi communication and features an integrated audio system for clear voice capture and high-fidelity audio output.

This manual provides essential information for setting up, operating, and maintaining your ATOM EchoS3R device.

2. Package Contents

Ensure all items are present in your package:

  • 1 x ATOM EchoS3R Device

The ATOM EchoS3R comes in a compact blister package.

ATOM EchoS3R in retail packaging

Figure 2.1: ATOM EchoS3R in its retail blister packaging.

3. Hardware Overview

Familiarize yourself with the components and interfaces of your ATOM EchoS3R:

ATOM EchoS3R labeled diagram showing components

Figure 3.1: Labeled diagram of the ATOM EchoS3R device.

  • Button (G41): User-programmable button.
  • IR-TX (G47): Infrared transmitter.
  • Reset: Device reset button.
  • USB-C (Power/Prog.): For power supply and programming.
  • Ext. Pin: General purpose expansion pins.
  • PORT.A HY2.0-4P: Grove-compatible port for external modules.
  • M2-Screw Hole: For mounting.
  • Audio System: ES8311 mono audio codec, NS4150B power amplifier, MEMS microphone, 8Ω@1W speaker.
  • Main Controller: ESP32-S3-PICO, with 8MB Flash and 8MB PSRAM.

4. Setup and Getting Started

4.1. Accessing Tutorials and Documentation

M5Stack provides extensive documentation and tutorials for the ATOM EchoS3R. Follow these steps to access them:

  1. Visit the official M5Stack website: https://m5stack.com/
  2. Click on the "DOCUMENT" section.
  3. Search for "ATOM EchoS3R" or your specific product.
  4. Scroll down the product page to find the "Tutorial" section.
Steps to access M5Stack tutorials

Figure 4.1: Guide to accessing online tutorials.

4.2. Entering Download Mode for Firmware Flashing

To flash new firmware onto your ATOM EchoS3R, you need to put it into download mode:

  1. Connect the ATOM EchoS3R to your computer via the USB-C port.
  2. Press and hold the Reset button on the device.
  3. Continue holding the Reset button for approximately 2 seconds until the internal green LED lights up.
  4. Release the Reset button. The device is now in download mode and ready for flashing.
Image showing how to enter download mode

Figure 4.2: Entering download mode by holding the reset button.

4.3. Software Development Platforms

The ATOM EchoS3R supports various development environments:

  • UiFlow2: A graphical programming platform for easy control.
  • Arduino IDE: For C/C++ programming and control.
  • Home Assistant: Integrate your device into Home Assistant for smart home voice control.
  • XiaoZhi Voice Assistant: Build a personal voice assistant application.

Refer to the M5Stack documentation for detailed guides on using each platform.

5. Operating the Device

5.1. Basic Functionality

The ATOM EchoS3R is designed for a range of voice interaction applications:

  • Audio Playback: Play audio through the integrated speaker.
  • Human-Computer Interaction: Engage in voice-based interactions.
  • Smart Home Control: Integrate with smart home platforms like Home Assistant for voice commands.
  • AI Voice Assistant: Develop and deploy AI voice assistant functionalities.
ATOM EchoS3R application scenarios

Figure 5.1: Visual representation of ATOM EchoS3R application scenarios.

5.2. Audio System

The device features a robust audio system for clear communication:

  • ES8311 Mono Codec: Provides 24-bit resolution audio processing via I2S protocol.
  • MEMS Microphone: High-sensitivity microphone with 65dB Signal-to-Noise Ratio (SNR) for clear voice capture.
  • NS4150B Power Amplifier: Drives the integrated 8Ω@1W speaker for high-fidelity audio output.

5.3. Connectivity and Expansion

  • Wi-Fi: Supports 2.4GHz Wi-Fi for network connectivity.
  • Expandable I/O: Features Ext. Pin and PORT.A HY2.0-4P for connecting external sensors, actuators, and modules.

6. Maintenance

To ensure the longevity and optimal performance of your ATOM EchoS3R, follow these general maintenance guidelines:

  • Keep Dry: Avoid exposure to moisture or liquids.
  • Clean Gently: Use a soft, dry cloth to clean the device. Do not use harsh chemicals or abrasive materials.
  • Avoid Extreme Temperatures: Operate and store the device within the specified operating temperature range (0 ~ 40°C).
  • Handle with Care: Avoid dropping or subjecting the device to strong impacts.

7. Troubleshooting

If you encounter issues with your ATOM EchoS3R, consider the following basic troubleshooting steps:

  • No Power: Ensure the USB-C cable is securely connected to a working power source (DC 5V).
  • Device Unresponsive: Try pressing the Reset button.
  • Programming Issues: Verify the device is in download mode (green LED on) before attempting to flash firmware. Check your development environment settings and cable connections.
  • Audio Problems: Ensure the microphone and speaker are not obstructed. Verify software configurations for audio input/output.
  • Wi-Fi Connectivity: Check your Wi-Fi network credentials and ensure the device is within range of a 2.4GHz network.

For more detailed troubleshooting, refer to the official M5Stack documentation and community forums.

8. Specifications

Detailed technical specifications for the ATOM EchoS3R:

SpecificationParameter
SoCESP32-S3-PICO-1-N8R8 @ Dual-core Xtensa LX7 processor, up to 240MHz
PSRAM8MB
Flash8MB
Power InputDC 5V
Audio CodecES8311: 24-bit resolution, I2S protocol
MicrophoneMEMS microphone, Signal-to-Noise Ratio (SNR): 65dB
SpeakerNS4150B amplifier chip + 8Ω@1W 1318 cavity speaker
Operating Temp0 ~ 40°C
Product Size24.0 x 24.0 x 16.8mm
Product Weight9.3g
Specifications table for ATOM EchoS3R

Figure 8.1: Detailed specifications of the ATOM EchoS3R.

For physical dimensions and weight:

ATOM EchoS3R dimensions

Figure 8.2: ATOM EchoS3R dimensions (24mm x 24mm x 16.8mm).

ATOM EchoS3R weight on a scale

Figure 8.3: ATOM EchoS3R weight (9.3g).

9. User Tips

  • Home Assistant Integration: Users have found success integrating the ATOM EchoS3R with Home Assistant for smart home voice control. Refer to the official M5Stack tutorials for detailed setup instructions.

10. Warranty and Support

For warranty information, technical support, and further resources, please visit the official M5Stack website: https://m5stack.com/.

You can also refer to the comprehensive user manual PDF available at: ATOM EchoS3R User Manual (PDF).

11. Product Demonstration Video

Watch the official product demonstration video for a visual overview of the ATOM EchoS3R's features and capabilities:

Video 11.1: Official product demonstration of the ATOM EchoS3R.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.