MYAMi LW-3010-2KD

Contents

MYAMi Dual Output DC Power Supply User Manual

Model: LW-3010-2KD (and other 2KD series models)

1. Introduction

Thank you for choosing a Longwei power series product. To ensure optimal use and longevity of your device, please read these instructions carefully before operation and keep them for future reference.

This series of DC voltage stabilizing power supplies are switch-type power supplies, offering high precision, high efficiency, low weight, energy saving, and environmental protection. They feature comprehensive protection functions, including over-pressure, over-temperature, overload, and current limit, safeguarding both the power supply and your connected devices. The unit provides stable voltage output and automatic conversion to steady current, functioning as both a voltage stabilization and steady flow power supply.

The power supply features two main outputs (CH1 and CH2) with adjustable voltage and current via respective knobs. Additionally, it includes two fixed 5V / 2A output ports (one terminal column, one USB) for user convenience. The two main outputs can be configured for series or parallel operation.

Front view of the MYAMi LW-3010-2KD Dual Output DC Power Supply
Front view of the MYAMi LW-3010-2KD Dual Output DC Power Supply, showing digital displays for voltage, current, and power, along with control knobs and output terminals.
Video demonstrating the multiple output capabilities and adjustment of the DC power supply, including series and parallel modes for CH1 and CH2, and fixed 5V 2A output.

2. Specifications

2.1. Rated Working Conditions

  • Input Voltage: AC 220V ± 10% (50 HZ) or AC 110V ± 10% (60HZ)
  • Working Environment: -10°C to +35°C, Relative humidity < 80%
  • Storage Environment: -20°C to +70°C, Relative humidity < 70%

2.2. Rated Output Parameters (Continuously Adjustable)

Rated Output Voltage and Current for 2KD Series Models
ModelRated VoltageRated Current
3005-2KD30V5A
3010-2KD30V10A
6003-2KD60V3A
6005-2KD60V5A
1003-2KD100V3A
  • Power Supply Effect: CV ≤ 0.5% FS, CC ≤ 0.5% FS
  • Load Effect: CV ≤ 0.5% FS, CC ≤ 0.5% FS
  • Line & Noise: CV ≤ 0.5% FS, CC ≤ 0.5% FS
  • Voltage Display Error: CV ≤ 0.5% FS, resolution 0.1V
  • Current Display Error: CC ≤ 0.5% FS, resolution 0.01A
  • Voltage and Current Display: 4-bit LED digital voltmeter and ammeter

2.3. Fixed Power Supply Output Parameters

  • Rated Output Voltage: 5V ± 1%
  • Rated Output Current: 2A ± 1%
  • Power Supply Effect: CV 0.5% FS, CC 0.5% FS
  • Load Effect: CV 0.5% FS, CC 0.5% FS
  • Line & Noise: CV 0.5% FS, CC 0.5% FS

2.4. Overall Dimensions

  • Dimensions: 370mm (L) x 260mm (W) x 165mm (H)
  • Weight: 8KG
Detailed specifications table for various 2KD series models
Image showing detailed specifications for various 2KD series models, including voltage and current ratings.

3. Product Overview

3.1 Front Panel Components

The front panel features the display screen, indicator lights, adjustment knobs, function buttons, output terminals, and the power switch.

  1. Output Value Display (CH1): Shows voltage, current, and power for the first circuit (CH1) when operating independently. In series or parallel mode, it displays total output voltage, current, and power.
  2. Output Value Display (CH2): Shows voltage, current, and power for the second circuit (CH2) when operating independently. This display is extinguished in series or parallel mode.
  3. CC Indicator Light (CH1): Illuminates when CH1 is in a steady flow (constant current) state.
  4. CV Indicator Light (CH1): Illuminates when CH1 is in a voltage stabilizing (constant voltage) state.
  5. Power Switch: Turns the unit on/off.
  6. CH1 Output Terminals: Positive (+) and negative (-) poles for the first circuit.
  7. CC Indicator Light (CH2): Illuminates when CH2 is in a steady flow (constant current) state.
  8. GND Terminal: Connects to the metal housing and input ground wire.
  9. CV Indicator Light (CH2): Illuminates when CH2 is in a voltage stabilizing (constant voltage) state.
  10. CH2 Output Terminals: Positive (+) and negative (-) poles for the second circuit.
  11. Fixed 5V/2A Terminal: Output terminals for fixed 5V, 2A.
  12. Fixed 5V/2A USB Terminal: USB port for fixed 5V, 2A output.
  13. Series Button: Press to connect CH1 and CH2 in series, doubling the voltage range. The button will illuminate when active.
  14. Parallel Button: Press to connect CH1 and CH2 in parallel, doubling the current range. The button will illuminate when active.
  15. Independent Key: Press to operate CH1 and CH2 independently, allowing separate voltage and current adjustments. The button will illuminate when active.
  16. Voltage Regulation Knob (CH2): Adjusts voltage for the second circuit.
  17. Current Regulation Knob (CH2): Adjusts current for the second circuit.
  18. Voltage Regulation Knob (CH1/Total): Adjusts voltage for the first circuit. In series/parallel mode, adjusts total output voltage.
  19. Current Regulation Knob (CH1/Total): Adjusts current for the first circuit. In series/parallel mode, adjusts total output current.

3.2 Rear Panel Components

Rear view of the DC Power Supply showing fans, power input, and voltage switch
Rear view of the DC Power Supply, highlighting the heat dissipation fans, 110V/220V switch, and power input interface with fuse.
  1. Heat Dissipation Fan: Used for air cooling. Features intelligent temperature control; starts rotating above 45°C internal temperature and stops below 40°C. Ensure at least 10cm clearance for proper airflow.
  2. 110V/220V Switch: Selects input voltage (AC110V or AC220V). Caution: Never switch this while the unit is powered on or without verifying the correct voltage, as it may damage the power supply.
  3. Power Input Interface: Includes safe ground wire, zero line, and fire line input. The fuse is located at the lower part and can be replaced by prying out the power plug with a screwdriver. Note: Only replace with a fuse of the same specification.

4. Setup and Operation

4.1. Prepare Before Power-On

  1. Verify Input Voltage: Ensure the input voltage switch (2 on rear panel) matches your local power supply (AC110V or AC220V). Incorrect setting will damage the unit.
  2. Placement: Allow at least 10cm of clear space around the power supply for heat dissipation. The working environment temperature should not exceed 40°C, and relative humidity should be below 80%. Avoid using in environments with acid/alkali gas, excessive dust, rain, direct sunlight, or severe vibrations.
  3. Power Cable: Ensure the three-core power cable is reliably grounded for safety. The line diameter of input and output cables should be sufficient for the expected current to prevent overheating. Regularly check that connection terminals are tightened to avoid loose connections and hot contact resistance.

4.2. Operation Method

4.2.1. Dual Output Independent Mode (Example: CH1)

  1. Connect the input power cord and turn on the power switch (5). The indicator light will illuminate, and the LED display will show readings.
  2. Voltage Stabilization Setting:
    • If the Independent key (15) is not lit, press it until it illuminates to enter independent output mode.
    • Turn the Current knob (19) clockwise to its maximum.
    • Adjust the Voltage knob (18) to the desired voltage value.
    • Connect your load to the CH1 output terminals (6).
    • The power supply is now operating in constant voltage (CV) mode, indicated by the CV indicator light (4) being on. The voltage will remain constant, and the current will vary with the load.
  3. Steady Current Setting:
    • Ensure the Independent key (15) is lit.
    • Adjust the Voltage knob (18) to output 3-5V (or any low safe voltage).
    • Turn the Current knob (19) counter-clockwise to its minimum.
    • Short-circuit the CH1 output terminals (6) with a suitable wire.
    • Adjust the Current knob (19) clockwise to the required current value.
    • Remove the short-circuit wire.
    • Adjust the Voltage knob (18) to the required voltage value.
    • Connect your load to the CH1 output terminals (6).
    • The power supply is now operating in constant current (CC) mode, indicated by the CC indicator light (3) being on. The current will remain constant, and the output voltage will vary with the load.
    • Note: If the CC indicator (3) is not lit and the CV indicator (4) is on, the power supply is not in steady current mode. Increase the Voltage knob (18) clockwise until the CC indicator (3) illuminates. A slight noise during direct short circuit is normal.
  4. The adjustment method for CH2 is identical to CH1. Observe the digital display and indicator lights for CH2.

4.2.2. Series or Parallel Output Mode

  1. Connect the input power cord and turn on the power switch (5). The indicator light will illuminate, and the LED display will show readings.
  2. Wiring for Series Mode: Connect the negative (-) terminal of CH1 to the positive (+) terminal of CH2. The positive (+) terminal of CH1 becomes the overall positive output, and the negative (-) terminal of CH2 becomes the overall negative output. Do not connect the middle GND terminal.
    Wiring diagram for series connection of CH1 and CH2
    Diagram illustrating the series connection of CH1 and CH2. The negative of CH1 connects to the positive of CH2. The overall output is from CH1 positive and CH2 negative.
  3. Wiring for Parallel Mode: Connect the positive (+) terminal of CH1 to the positive (+) terminal of CH2. Connect the negative (-) terminal of CH1 to the negative (-) terminal of CH2. The overall positive output is from either positive terminal, and the overall negative output is from either negative terminal.
  4. Mode Selection:
    • Press the Series button (13) for series operation. The button will illuminate. In this mode, the voltage range is doubled.
    • Press the Parallel button (14) for parallel operation. The button will illuminate. In this mode, the current range is doubled.
    • When in series or parallel mode, the output voltage, current, and power are displayed only in the first channel (CH1) window; the second channel (CH2) display will be extinguished.
    • The Voltage knob (18) and Current knob (19) of the first circuit (CH1) become the overall voltage and current adjustment knobs. The CC indicator (3) and CV indicator (4) lights function as constant current and constant voltage indicators for the combined output.
  5. Voltage Stabilization Setting (Series/Parallel): Adjust the Current knob (19) clockwise to maximum. Adjust the Voltage knob (18) to the required voltage value. Connect the load. The CV indicator (4) will light up, indicating constant voltage.
  6. Steady Current Setting (Series/Parallel): Adjust the Voltage knob (18) to 3-5V. Turn the Current knob (19) counter-clockwise to minimum. Short-circuit the output terminals. Adjust the Current knob (19) to the required current value. Remove the short-circuit wire. Adjust the Voltage knob (18) to the required voltage value. Connect the load. The CC indicator (3) will light up, indicating constant current.

5. Maintenance

  1. Fuse Replacement: If the fuse is blown, identify the cause before replacing it. The safety fuse is located at the lower part of the power input interface (2) on the rear panel. Use a screwdriver to pry out the power plug and replace the fuse with one of the same specification.
  2. Cleaning: Regularly dust the power supply and wipe the shell with a dry cloth. Do not use organic solvents. Use high-pressure dry air to blow dust out of the ventilation holes, but do not open the shell to avoid accidents.
  3. Long-Term Storage: If the power supply will not be used for an extended period, unplug it completely from the power supply. Store it in a ventilated, dry place away from direct sunlight. Every six months, power on the unit for more than 30 minutes to empower the internal capacitors.
  4. High Voltage Warning: The machine contains high voltage components. Non-professional personnel are strictly prohibited from opening the casing for maintenance to avoid electric shock and other hazards.

6. Troubleshooting Common Faults

Troubleshooting Guide
SymptomPossible CauseExclusion Method
No electricity1. The fuse is fused.
2. The input power cord is open.
3. The plug is loose.
1. Refer to section 5.1 for fuse replacement.
2. Check and repair input line problems.
3. Plug it in tightly.
No voltage output1. Constant flow set to minimum.
2. Overtemperature protection.
1. Adjust the current knob (17 or 19) to the middle position.
2. Turn off the power supply and allow it to cool down before restarting.
Power supply keeps starting (cycling)1. Overtemperature protection.
2. The fan does not turn.
1. Improve the working environment of the power supply.
2. Check if the fan is stuck or damaged, leading to poor heat dissipation. Replace if necessary.

Note: If the fault persists after attempting the above solutions, please contact the dealer for support.

7. User Tips

  • Always double-check the input voltage switch (110V/220V) on the rear panel before powering on to prevent damage.
  • When using the series or parallel function, ensure the correct wiring is followed as described in section 4.2.2 to avoid unexpected behavior or damage.
  • For precise current or voltage settings, it's recommended to set the desired value with no load connected, then connect your device.
  • Keep the ventilation areas clear to ensure proper cooling and prevent overheating, especially during prolonged use.

8. Packing List

  • 1 x Power Supply Unit
  • 1 x User Manual
  • 1 x Power Line
  • 1 x Qualification Certificate

Note: For any printing errors or discrepancies with the latest information, the manufacturer reserves the right to update the manual without prior notice.

9. Warranty and Support

For warranty claims, technical support, or any questions not covered in this manual, please contact your seller or the MYAMi Official Store directly. Provide your product model number (e.g., LW-3010-2KD) and a detailed description of the issue for efficient assistance.

Certificate of Conformity for MY-K5020 Power Supply
Certificate of Conformity, indicating compliance with European Directive for power supply models including MY-K5020.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.