4K Ultra HD Action Camera S11s User Manual

1. Introduction

This 4K Ultra HD Action Camera S11s is designed for adventurers, video bloggers, and outdoor enthusiasts. It features 6-axis stabilization technology to provide cinema-grade videos and photos even in dynamic environments. Capture stable and clear shots whether you're mountain biking, surfing, or recording road trips.

Key Features:

• 4K Ultra HD Video & 20MP Photos: Records high-definition video at 4K/60fps and captures 20MP still photos with exceptional clarity. Ideal for professional vlogging, social media content, or preserving high-quality memories.
• 6-Axis Electronic Image Stabilization (EIS): Advanced EIS technology effectively eliminates blurriness and jitter during rapid movements, such as cycling, running, and diving, ensuring smooth and stable visuals without the need for a gimbal.
• Waterproof up to 30M: Equipped with a magnetic waterproof shell, allowing for reliable underwater recording.
• WiFi and App Control: Connects to your smartphone via WiFi for real-time preview, easy file sharing, and remote control.
• Wide-Angle Lens: Captures a broader range of images, enriching video content.
• Lightweight and Portable: Compact design (65.5mm x 32.5mm x 23.5mm) and lightweight (approx. 53g) for easy maneuverability.
• Long-Lasting Battery: Built-in rechargeable lithium battery provides approximately 3 hours of recording time on a full charge. Supports simultaneous charging via Type-C port.

2. Safety Information

California's Proposition 65 Warning:

Warning: This product contains Bisphenol A (BPA), a chemical known to the State of California to cause developmental toxicity. For more information go to www.P65Warnings.ca.gov

General Safety Notes:

• Usage: Strictly abide by the relevant laws of the country where you are using this product. Do not use this product for any illegal purposes; otherwise, you will be responsible for the consequences.
• Working Temperature: Use at natural temperatures. Do not use at temperatures that the human body cannot adapt to.
• Shooting Requirements: Use the camera in an environment with sufficient light sources. Do not aim the camera directly at strong light sources such as the sun to avoid damage to the optical components.

3. Parts List

The following components are included in your package:

Figure 3.1: Included Accessories

4. Setup

4.1 Equipment Identification Diagram

Figure 4.1: Camera Controls and Ports

• Power on/Video button: Used to power on/off and start/stop video recording.
• TF card slot: Insert your MicroSD (TF) card here.
• Photo/WIFI button: Used to take photos and toggle WiFi on/off.
• USB charging interface: For charging the device and connecting to a computer.

4.2 Initial Charging

The device is equipped with a rechargeable lithium battery. For first-time use, please charge it fully. The red indicator light will remain on during charging and turn off when fully charged. Charging typically takes 3-4 hours.

You can charge the camera using:

• A computer via the provided USB cable.
• A power adapter or portable power bank.

4.3 Inserting TF Card

Insert a MicroSD (TF) card into the TF card slot. The camera supports up to 256GB memory cards.

Tip: The TF card will be automatically formatted upon first use. The alternating flashing of blue and green lights indicates that the memory card is being formatted. After formatting is complete, the blue light stays on and the green light goes out. If there are important files on the card, please back them up to another device before using the card with the camera.

5. Operating Instructions

5.1 Indicator Light Description

• Blue light:
  • Stays on: Device is turned on, in standby mode.
  • Flashes slowly: Recording video.
  • Flashes rapidly: No TF card inserted or card not read.
• Green light:
  • Stays on: WiFi is enabled.
  • Flashes slowly: WiFi connection is successful.
• Red light:
  • Flashes slowly: Low battery.
  • Stays on: Connected to a computer or charging.
  • Goes out: Fully charged.
• Blue and green lights flashing alternately: Formatting the memory card.

5.2 Power On/Off

• Power On: Press and hold the Power/Video button to turn on the device. The blue light will remain on, indicating standby mode. If inactive for 3 minutes, the device will automatically shut down. If no TF card or an abnormality is detected, the blue light will flash rapidly for 1 minute and then automatically shut down (WiFi will not automatically shut down with or without a card).
• Shutdown: Press and hold the Power/Video button to turn off the device. The indicator light will turn off.

5.3 Video Recording

• In standby mode, short press the Power/Video button. The blue light will flash slowly to indicate recording has started.
• To stop recording, short press the Power/Video button again. The blue light will remain on, and the camera will return to standby mode.

5.4 Photography

• In standby mode, briefly press the Photo/WiFi button. The blue light will flash once, indicating a photo has been taken.

5.5 WiFi Connection

• Turn on WiFi: Long press the Photo/WiFi button to turn WiFi on or off. The green light will turn on when WiFi is enabled and turn off when disabled.
• Connect to WiFi:
  1. First, ensure the WiFi switch on the device is turned on (green light is on).
  2. On your phone or tablet, search for the WiFi network starting with 'S' or 'M' (e.g., Sxx_XXXX or Mxx_XXXX) in your WiFi settings.
  3. The initial password is 12345678.
  4. The green light will flash when the connection is successful.
• To restore the initial WiFi password, press and hold the Photo/WiFi button for 10 seconds.

5.6 APP Operation

Download the companion app by scanning the QR code on the homepage, or searching for "Wind Recorder" on Google Play or App Store.

Figure 5.1: Real-time preview via App

• Recording/Photo: Click the record icon to start/stop recording, and the camera icon to take a photo and save.
• File Download: Open the video file in the app that needs to be downloaded and click the download icon in the bottom left corner.
• APP Settings: Click the settings icon on the preview interface to enter the recorder settings.

5.7 Reset

If the machine crashes, buttons are invalid, or it cannot be used normally, you can press the "R" reset button (if available) to force a reset and restart. If there is no "R" reset button, press and hold the Power/Video button for more than 10 seconds to force a reset and restart.

5.8 Time Setting

After connecting to a hotspot WiFi and entering the app, the device will automatically synchronize the time. The time watermark can be turned on or off in the app settings.

6. Maintenance

Cleaning:

Do not use the camera in environments with high dust density to prevent the lens and other components from being contaminated. If there are fingerprints or dust on the lens or lens surface, use a clean, soft, dust-free cloth to wipe it off.

7. Troubleshooting

• Device not powering on: Ensure the battery is charged. Connect to a power source and try again. If still unresponsive, perform a reset (see section 5.7).
• TF card not recognized: Ensure the TF card is inserted correctly. If the blue light flashes rapidly, the card is not read. Try re-inserting or using a different compatible TF card. The camera will format the card on first use; ensure important data is backed up.
• Unstable video footage: Ensure the 6-axis electronic image stabilization (EIS) is enabled in the camera settings via the app.
• WiFi connection issues: Verify that WiFi is enabled on the camera (green light on). Check the WiFi password (default is 12345678). If issues persist, try resetting the WiFi password (long press Photo/WiFi button for 10 seconds).
• Short battery life: Ensure the camera is fully charged before use. Avoid extreme temperatures which can affect battery performance.

8. Specifications

Physical Dimensions:

Figure 8.1: Product Dimensions

• Overall Size: 65.5mm (Height) x 32.5mm (Width) x 23.5mm (Depth)
• Bare Weight: Approximately 53g

9. User Tips

• For optimal stability, ensure the camera is securely mounted using the appropriate accessories for your activity (e.g., bicycle stand for cycling, magnetic suspension rope for hands-free recording).
• Regularly check the battery level, especially before long recording sessions, to avoid interruptions.
• When using the waterproof case, always ensure it is properly sealed before submerging the camera to prevent water damage.
• Experiment with different mounting angles and accessories to achieve unique perspectives for your videos and photos.

10. Warranty and Support

For detailed warranty information and technical support, please refer to the official product documentation or contact the seller directly. A comprehensive user manual in PDF format is available for download: User manual (PDF).

11. Compliance Information

FCC Warning:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC's RF Exposure guidelines, this equipment should be installed and operated with minimum 20cm distance between the radiator and your body. Use only the supplied antenna.