AIBOMAN A320M

Contents

AIBOMAN A320M Motherboard User Manual

Model: A320M

Introduction

This manual provides detailed instructions for the installation, setup, and operation of your AIBOMAN A320M ATX Motherboard. Please read this manual thoroughly before proceeding with installation to ensure correct setup and optimal performance.

AIBOMAN A320M Motherboard
Figure 1: AIBOMAN A320M Motherboard Overview

Specifications

The AIBOMAN A320M motherboard is designed for desktop applications, offering robust performance for various computing tasks. Key specifications are listed below:

Feature Description
ModelA320M Motherboard
Plate TypeATX (180mm x 215mm)
ChipsetAMD A320
CPU SocketAM4 (Supports AMD Ryzen 4000 Series-R3, 3000 Series-R9, 2000 Series-R5)
RAM Slots2*DDR4 SDRAM slots (Supports DDR4 2000/2666/3200)
Max RAM Capacity64 GB
Storage Interface TypeM.2 (NVMe), 4x SATA 3.0 (6Gb/s) ports
PCI-E StandardsPCI-E 3.0 (1x PCI-Ex1 slot)
Onboard LAN1x RJ45 (Realtek 100/1000 Mbps)
Back I/O PortsPS/2, 1x HDMI, 1x VGA, 4x USB 3.0, Gigabit Ethernet, 1x 3-in-1 Audio port (line in/line out/MIC in)
Power Port2x12-pin ATX power connector, 2x4-pin ATX 12V power connector
TDP50-70W
A320M Motherboard Specifications Diagram
Figure 2: Motherboard with detailed specifications and port overview.
A320M Motherboard Dimensions
Figure 3: Motherboard dimensions (21.5 cm x 18.0 cm).

Setup and Installation

1. CPU Installation

Ensure your CPU is compatible with the AM4 socket and has thermal paste applied (if not pre-applied on the cooler).

  1. Open the CPU socket retention hook.
  2. Pull up the retention rod to its fully open position.
  3. Carefully remove the plastic cover from the CPU socket.
  4. Align the CPU with the socket, matching the golden triangle on the CPU with the triangle on the socket. Gently insert the CPU into the slot. Do not force it.
  5. Press the retention rod gently down onto the bearing plate and close the hook to secure the CPU.
CPU Socket and ATX Power Connector
Figure 4: Close-up of the CPU socket and ATX power connector.

2. Memory (RAM) Installation

The motherboard has two DDR4 SDRAM slots. Ensure you use DDR4 memory modules.

  1. Locate the memory slots. Note that there is only one gap in the center of the memory module.
  2. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot.
  3. Vertically insert the RAM module into the DIMM slot.
  4. Push down firmly on both ends of the memory module until the clips on the sides of the slot automatically close and lock the module in place. The gold finger part should be completely inserted and not visible.

Note: DDR2 and DDR3 memory cannot be mixed. Only use DDR4 modules with this motherboard.

3. CPU Fan and System Fan Installation

The cooling fan power interfaces support 12V. If your motherboard has an integrated system hardware monitor chip, you can use CPU fan control functions.

  1. For the CPU fan, ensure the four screws are in the correct position on the fan and the mainboard.
  2. Press the fan down firmly until the four screws are correctly inserted and secured.
  3. Connect the CPU fan power line to the designated CPU_FAN header on the mainboard.
  4. For system fans, connect them to any available SYS_FAN header. If a fan cannot be connected to the motherboard, it can be connected directly to the power supply.

4. Connecting Front Panel Headers

Connect the cables from your PC case's front panel to the corresponding headers on the motherboard.

USB PIN (USB 2.0/3.0)

This interface is compatible with the I/O front panel connection specification and can be connected to USB peripheral interfaces such as USB HDDs, digital cameras, MP3 players, and printers.

USB PIN Layout
10. USBOC9. No Pin
8. Ground7. Ground
6. USBD+5. USBD+
4. USBD-3. USBD-
2. VCC1. VCC

Audio (Front Panel Audio Slot)

Audio PIN Layout
10. Head Phone Detection9. Head Phone L
8. No Pin7. SENSE SEND
6. MIC Detection5. Head Phone R
4. PRESENCE#3. MIC R
2. Ground1. MIC L

Power/Reset/HDD LED Headers

Connect the power switch, reset switch, power LED, and HDD LED cables from your case to the corresponding pins on the motherboard's front panel header. Refer to the motherboard diagram for exact pin locations.

A320M Motherboard Labeled Ports and Connectors
Figure 5: Motherboard layout with labeled ports and connectors, including front panel headers.

5. Jumper Settings

Jumpers are used to configure certain motherboard settings. A jumper cap inserted over two pins creates a "short circuit" or "closed" connection.

  • **Pin Connector**: Inserting the jumper cap into two pins will close it (short circuit).
  • **Example**: A jumper cap can be inserted into pins 1-2 or 2-3 to make a closed connection.

How to Identify the First Pin:

Look carefully at the motherboard. Any pin marked with "1" or a white thick line indicates the 1-pin position. Alternatively, the square pad on the backplane usually signifies the first leg.

Operating Instructions: BIOS Setup

The BIOS (Basic Input/Output System) is firmware that initializes hardware during the booting process and provides runtime services for operating systems. You can access the BIOS setup utility to configure system settings.

Accessing BIOS Setup

  1. Power on your computer.
  2. During the Power-On Self-Test (POST), when information appears on the screen, press the DEL key to enter the BIOS setup program.
  3. To quickly boot from a U disk, press F11 during POST.

If the screen information disappears too quickly, you may need to restart your system. You can do this by pressing the reset button on your case or by pressing Ctrl + Alt + Delete simultaneously.

Note: For better system performance, the BIOS may be updated periodically. The descriptions and screenshots in this manual are for reference only and may differ slightly from the latest BIOS version.

BIOS Navigation (General)

The BIOS utility typically features several main menus for configuration:

  • **Main Page**: Provides basic system configuration options such as time and date.
  • **Advanced Menu**: Contains settings for special enhancements and hardware configurations, including hard disk quick start steps.
  • **Boot Menu**: Allows you to set the boot order and configure options for booting from devices like USB drives.

Serial Port Interface (COM)

The motherboard includes a 16550A communication port (serial port) that supports 16 characters per second of FIFOs. This port can be used to connect serial devices.

Maintenance

  • **Keep it Clean**: Regularly clean dust from the motherboard and components using compressed air. Dust buildup can lead to overheating and component failure.
  • **Proper Ventilation**: Ensure your PC case has adequate airflow to prevent overheating.
  • **Handle with Care**: When handling the motherboard, always hold it by the edges and avoid touching components or connectors directly. Use anti-static precautions.
  • **BIOS Updates**: Check the manufacturer's website for BIOS updates. Only update the BIOS if necessary and follow the instructions carefully. Incorrect BIOS updates can damage the motherboard.

Troubleshooting

If you encounter issues with your motherboard, consider the following common troubleshooting steps:

  • **No Power/No POST**:
    • Check all power connections (24-pin ATX, 8-pin CPU, GPU if applicable).
    • Ensure the CPU and RAM are correctly seated.
    • Try booting with only essential components (CPU, one RAM stick, GPU if no integrated graphics).
    • Clear CMOS (refer to motherboard manual for jumper location or battery removal).
  • **Display Issues**:
    • Ensure the monitor cable is securely connected to the correct port (motherboard or discrete GPU).
    • Verify the GPU is properly seated and powered.
    • Test with a different monitor or cable.
  • **Memory Errors**:
    • Reseat RAM modules.
    • Test RAM modules one by one in different slots.
    • Ensure RAM is compatible (DDR4, correct speed).
  • **Peripheral Not Detected**:
    • Check cable connections (USB, SATA).
    • Ensure drivers are installed for the peripheral.
    • Check BIOS settings to ensure ports are enabled.

User Tips

  • **Ryzen Compatibility**: This motherboard works well with AMD Ryzen 5 2600 processors, providing a stable and reliable platform for your system.
  • **BIOS Updates**: While the manual states BIOS updates are for reference, always check the official AIBOMAN support page for the latest BIOS versions and update instructions to ensure compatibility with newer CPUs or to fix potential issues.
  • **Cable Management**: Good cable management not only improves the aesthetics of your build but also enhances airflow, contributing to better cooling and system stability.
Example PC build with A320M motherboard installed
Figure 6: An example of a PC build utilizing the A320M motherboard.

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AIBOMAN website. Keep your proof of purchase for warranty claims.

A PDF version of this user manual is available for download: AIBOMAN A320M Motherboard User Manual (PDF)

© 2023 AIBOMAN. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.