SONGGER DZ47S-63

Contents

DZ47S-63 Three Phase Motor Protection Switch

User Instruction Manual

1. Introduction

The DZ47S-63 Motor Phase Loss Protection Switch is a robust motor protection device designed for three-phase electrical systems. It provides essential protection against common electrical faults such as phase loss, overload, and short circuits. This ensures the safe and reliable operation of industrial motors and significantly reduces the risk of equipment damage and costly downtime. This manual provides detailed instructions for the proper installation, operation, and maintenance of your DZ47S-63 switch.

DZ47S-63 Three-Phase Breaker product overview, highlighting short circuit/overload protection, phase loss/failure protection, 12 kW motor power, AC 380V rated voltage, 50Hz rated frequency, and DIN rail mounting.
Figure 1: DZ47S-63 Three-Phase Breaker with key features.

2. Specifications

Below are the technical specifications for the DZ47S-63 Motor Protection Switch:

Feature Detail
Product Name Motor Phase Loss Protection Switch (DZ47S-63 Series)
Power Supply AC system
Rated Voltage AC 380V
Motor Power Capacity Up to 12 kW
Rated Current Options 16A, 32A, 63A
Rated Frequency 50 Hz
Number of Poles 3P
Phase-Loss Trip Time ≤ 0.3 seconds
Protection Functions Phase loss, overload, short circuit
Installation Method DIN rail mounting
Material Flame-retardant insulating housing
EU LVD Voltage High voltage: Above 50Vac or 75Vdc
Type Mini
Origin Mainland China
Product size diagram showing dimensions: 102mm (4.02 in) length, 96mm (3.78 in) height, 76mm (2.99 in) width, and specific internal measurements.
Figure 2: Product Dimensions.

3. Package Contents

The package typically includes:

  • 1x DZ47S-63 Motor Protection Switch Unit

4. Safety Precautions

WARNING!

  • Risk of Electric Shock: Always ensure complete disconnection from the power supply before any installation, maintenance, or servicing.
  • High Voltage Equipment: Improper handling of this high voltage equipment can result in serious injury or severe equipment damage.
  • Live Parts: Do not touch live parts during operation.
  • Children: Keep out of reach of children.
  • Qualified Personnel: Installation and servicing must be performed by qualified personnel only.
  • Operating Limits: Do not operate the device beyond its rated voltage and motor capacity.
  • Environmental Conditions: Avoid using the device in environments with excessive moisture, dust, or corrosive gases unless adequate protection is specifically provided.
  • Disposal: Follow WEEE directives for proper disposal of electronic waste.

5. Installation (Setup)

Follow these steps for proper installation of the DZ47S-63 Motor Protection Switch:

  1. Disconnect Power: Before beginning any installation, ensure that the main power supply to the circuit is completely disconnected and locked out.
  2. Mounting: Securely mount the device onto a standard DIN rail. Ensure it is firmly seated and cannot be easily dislodged.
  3. Wiring: Connect the line input and line output terminals according to the wiring diagram provided below. Ensure all connections are tight and secure.
  4. Initial Reset: Before switching on the power, press the blue reset button on the device.
Detailed view of the DZ47S-63 switch with labeled components including Wiring Diagram, Indicator Window, Test Button, Leakage Indicator, Line Input Terminal, Operating Handle, and Line Output Terminal.
Figure 3: Component Labels and Wiring Diagram.

6. Operation

Once installed, the DZ47S-63 switch operates as follows:

  1. Energize System: After installation and initial reset, energize the electrical system.
  2. Continuous Monitoring: The switch will continuously monitor the circuit for phase loss, overload, or short circuit conditions.
  3. Automatic Trip: In the event of any detected fault (phase loss, overload, or short circuit), the device will automatically trip, disconnecting power to the motor to prevent damage.
  4. Fault Indication: If the reset button pops up, it indicates that the switch has tripped due to a fault.
  5. Resetting: After a trip, identify and resolve the underlying fault condition before attempting to reset the switch. Once the fault is cleared, press the reset button to restore operation.
  6. Functional Testing: Use the yellow "T" test button monthly to verify the proper operation of the protection mechanism. This ensures the device is functioning correctly.

7. Maintenance

To ensure the longevity and reliable performance of your DZ47S-63 switch, follow these maintenance guidelines:

  • Storage: Store the product in a dry, well-ventilated environment, away from direct sunlight and corrosive substances.
  • Cleaning: Clean the exterior of the device with a soft, dry cloth. Do not use solvents or spray water directly on the device.
  • Periodic Inspection: Inspect the switch periodically for any signs of wear, physical damage, or loose electrical connections. Address any issues promptly.
  • Regular Testing: Perform the monthly functional test using the yellow "T" button as described in the Operation section.

8. Troubleshooting

If you encounter issues with your DZ47S-63 switch, consider the following:

  • Switch Trips Frequently: If the reset button pops up repeatedly, it indicates a persistent fault (phase loss, overload, or short circuit) in the protected circuit. You must identify and resolve the root cause of the electrical fault before resetting the switch. Do not repeatedly force the switch to reset without addressing the fault.
  • Switch Does Not Trip During a Fault: If you suspect a fault condition but the switch does not trip, perform the monthly functional test using the yellow "T" button. If the test button does not cause the switch to trip, the protection mechanism may be faulty, and the device should be inspected by qualified personnel or replaced.
  • No Power After Reset: Ensure the main power supply to the circuit is active and all connections are secure. If the issue persists, consult a qualified electrician.

9. User Tips

  • Regular Testing: Make it a habit to press the yellow 'T' test button monthly. This simple check confirms that the internal protection mechanisms are still functional and ready to protect your motor.
  • Control Cabinet Integration: When installing in a control cabinet, ensure adequate ventilation to prevent overheating, especially in high-load applications.

10. Warranty and Support

For specific warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase records handy when contacting support.

A digital version of this user manual is available for download. You can reference the PDF document for further details: View User Manual (PDF)

11. Compliance Disclaimer

This document is provided for product instruction purposes only. It does not constitute legal advice. The seller is responsible for ensuring compliance with destination market regulations.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.