FYQCLBJYX Magnetic Oil Drain Plug M18 M20

Contents

FYQCLBJYX Aluminum Alloy Magnetic Oil Drain Plug User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your FYQCLBJYX Aluminum Alloy Magnetic Oil Drain Plug. This product is designed to attract and hold metal particles from your engine oil, helping to prevent engine wear and extend engine service life.

2. Warning & Safety Information

  • Never remove or install while the engine is running.
  • Ensure the engine is fully cooled before operation.
  • Avoid contact with hot components to prevent burns.

3. Setup & Installation

Installation Instructions:

  1. Clean the area around the old oil drain bolt and the oil pan surface thoroughly.
  2. Carefully remove the old oil drain bolt.
  3. Install the new FYQCLBJYX magnetic oil drain plug with the provided washer.
  4. Tighten the mounting bolt evenly and securely to the manufacturer's recommended torque specifications for your vehicle. Avoid overtightening.

Precautions:

  • Do not reuse old oil drain bolts.
  • Inspect the oil pan for any cracks or damage before installing the new plug.
  • Always use OEM or compatible-specification parts for your vehicle.

4. Operating Principles & Features

The FYQCLBJYX magnetic oil drain plug is designed to enhance engine protection by:

  • Reducing Engine Wear: The integrated powerful magnet attracts and holds ferrous metal particles that are suspended in the engine oil, preventing them from circulating and causing further wear.
  • Capturing Harmful Pollutants: It effectively captures metal debris that results from normal engine component wear over time.
  • Excellent Sealing Performance: Designed to provide a secure seal, preventing engine oil leakage.
  • Durability: Constructed from heat-resistant and oil-resistant aluminum, suitable for various operating conditions.
  • Extends Engine Service Life: By removing abrasive metal particles from the oil, the plug contributes to a cleaner lubrication system and potentially longer engine life.

5. Maintenance

During each oil change, inspect the magnetic tip of the drain plug. Any accumulated metal particles should be wiped clean before reinstalling the plug with a new washer. Regularly check for any signs of leakage around the plug.

6. Troubleshooting

  • Oil leakage after installation: This may result from improper installation, such as insufficient tightening, an old or damaged washer, or damage to the oil pan threads. Ensure proper torque and a new washer are used.
  • Gasket/Washer damage: This can be caused by excessive torque during installation. Always adhere to your vehicle's recommended torque specifications.

7. Specifications

FeatureDescription
Product NameMagnetic Oil Drain Plug
MaterialAluminum Alloy
Item TypeNuts & Bolts
Thread Sizes AvailableM18 x 1.5 (18mm / 0.7in), M20 x 1.5 (20mm / 0.79in)
Compatibility (M18)BMW 118 (and other vehicles with M18x1.5 thread)
Compatibility (M20)Most 2003-2010 Land Rover Range Rover 2.0/2.5/2.5T, 2009-2012 Land Rover Range Rover 2.5T, 2005-2009 Range Rover Sport, 2010-2014 Range Rover Evoque 3.6, 2008-2010 Geely vehicles (and other vehicles with M20x1.5 thread)

Note: Always verify the thread size of your original oil drain plug before purchasing.

Two magnetic oil drain plugs with dimensions

Figure 1: Magnetic Oil Drain Plugs with Approximate Dimensions (18mm and 20mm)

8. User Tips

No specific user tips were available from reviews or Q&A for this product. Always ensure the correct thread size is selected for your vehicle and use a new crush washer with each oil change to prevent leaks.

9. Warranty & Support

For warranty information and customer support, please refer to the details provided by your seller at the time of purchase. Keep your proof of purchase for any warranty claims.

A PDF version of this user manual may be available from the seller: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.