1. Introduction
Thank you for purchasing the WDXSKY DC40V Retro Handheld Game Console. This device combines classic gaming with modern features, offering a portable and immersive experience. This manual provides essential information for setting up, operating, and maintaining your console. Please read it thoroughly before use.

2. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the device to strong impacts.
- Keep the device away from water and other liquids.
- Do not attempt to disassemble or repair the device yourself. Contact support if issues arise.
- Use only the provided charging cable and a compatible 5V-2A power adapter.
- Please exit the game properly before shutting down the console. Do not press any buttons when the system is starting up.
3. Package Contents
Ensure all items are present in your package:
- DC40V Gaming Console
- Protective Holdall/Case
- Type-C Data Cable
- Screen Protector
- Long Joystick Caps (pair)
- Short Joystick Caps (pair)
- User Manual (this document and PDF)

4. Device Overview
The DC40V console features an ergonomic design with a 4-inch IPS screen and customizable RGB lighting on the joysticks. It is available in multiple colors.

4.1. Button Layout and Ports

- Front: VXAB buttons, START key, FN key, SELECT key, Arrow keys, Left/Right Joystick (with ambient lighting), Power indicator light.
- Top: R1/R2 keys, L1/L2 keys, Power button, Restart button.
- Bottom: TF card socket, Volume button, Headphone jack (Standard 3.5mm), Lanyard hole, Charging port (Type-C), OTG interface (Type-C data port).
- Back: Vibration Motor, Ventilation hole, Battery compartment.
4.2. Key Features
- Display: 4.0-inch IPS OCA full-fit HD screen, 720*720 resolution.
- Processor: RK3326 professional gaming chip, 1.5 GHz 64-bit ARM quad-core Cortex A35 CPU, Mali-G31MP2 GPU (supports OpenGL ES 3.2).
- Operating System: Open Source Linux.
- Storage: 1GB RAM, supports 16GB-256GB TF Card.
- Battery: Built-in Li-Po 3.7V 4000mAh, offering 4-6 hours of gameplay.
- Connectivity: 2.4G WiFi 802.11B/G/N for online multiplayer.
- Haptics: Built-in vibration motor (rated speed 13000 ± 2000 rpm, Vibration Level 1G).
- Audio: Built-in BOX cavity horn.
- Joysticks: Hall effect joysticks with RGB lighting, replaceable caps (long and short included).

5. Setup
5.1. Initial Charging
Before first use, fully charge the console using the provided Type-C data cable and a 5V-2A power adapter. The charging time is approximately 2 hours.
5.2. Inserting the TF Card
Locate the TF card socket on the bottom of the console. Gently insert your game-loaded TF card until it clicks into place.
5.3. Powering On/Off
- Power On: Press and hold the Power button located on the top of the console until the screen lights up.
- Power Off: Ensure you have exited any running games. Then, press and hold the Power button until the shutdown options appear, and select to power off.
6. Operating Instructions
6.1. System Navigation
Use the joysticks or arrow keys to navigate through the system menus. Press the 'A' button to select an option and 'B' to go back.
6.2. Game Controls and Shortcuts
The DC40V supports various emulators and offers convenient in-game shortcuts:
General Game Shortcuts (except PSP and NDS):
- Save Game Progress: SELECT + R1
- Load Saved Game Progress: SELECT + L1
- Exit the Game: (SELECT + START) * 2
- Game Acceleration (Toggle): SELECT + R2
- Display FPS: SELECT + B
- RA Menu: SELECT + X
- Game Screenshot: SELECT + Y
- Pause the Game: SELECT + A
- Adjust Screen Brightness: FN + Volume Keys
PSP Game Button Instructions:
- PSP Menu: SELECT + B
- Save Game: Press SELECT + R to enter the PSP menu, then navigate to 1.Settings > 2.System > 3.Auto load/save state > 4.Slot 1 > 5. Back > 6. Save state for successful saving > 7. Exit to menu to exit.
NDS Game Button Instructions:
- Switch Screen Display (Vertical/Horizontal): Press R2
- Full-screen Switch: Press L2
- Right Joystick: Use as stylus to click
- Left Joystick: Enter the game background menu
6.3. Joystick Customization
The DC40V features replaceable joystick caps, allowing you to switch between long and short styles for different operational sensations.

6.4. Wi-Fi Multiplayer
The console supports Wi-Fi for LAN online battles, allowing you to play with friends. (Note: Games need to support two-player fighting and be set up within the game's options).

6.5. External Controller Support
The DC40V can connect to 2.4G dual wireless controllers for an alternative gaming experience. (Additional purchase of controllers is required).

7. Game Management
7.1. Emulator Settings
The EmuELEC system offers three methods for setting up games:
- Global Settings: Adjust settings in the 'Game Settings' section of the ES menu.
- Emulator Configuration: Access 'PER SYSTEM ADVANCED CONFIGURATION' for specific emulator settings.
- Single Game Settings: Press and hold the 'A' button on a game name and set options in the 'Advanced Game Options' menu.
Note: The priority for settings is Individual Game Settings > Emulator Settings > Global Settings.
7.2. Child Mode
To unlock Child Mode, press the START key, select 'UNLOCK USER INTERFACE MODE', press 'A', and then input 'AAABA' in sequence.
7.3. Joystick Light Settings
To adjust joystick light settings, press START to enter the menu and then press 'A' at 'LEDS SETTINGS'. Note that brightness cannot be adjusted in 'SCROLLING' mode but can be adjusted in all other modes.
8. Specifications
| Feature | Description |
|---|---|
| Brand Name | WDXSKY |
| Model | DC40V |
| System | Open Source Linux |
| Emulators Supported | MAME, N64, PS1, PSP, DC, NDS, GBC, SFC, GBA, IFC, CPS1, CPS2, CPS3 (30+ simulators) |
| Screen | 4.0 inch IPS OCA full fit HD screen |
| Screen Resolution | 720*720 |
| CPU | ARM quad core Cortex A35 CPU up to 1.5GHz |
| GPU | Mali-G31MP2 (supports OpenGL ES 3.2) |
| RAM | 1GB |
| TF Card Support | 16GB-256GB |
| Games Included | 64G with 18000+ Games / 128G with 22000+ Games |
| Audio | Built-in BOX cavity horn |
| Vibration Motor | Rated speed 13000 ± 2000 rpm, Vibration Level 1G |
| WiFi | 2.4G WiFi 802.11B/G/N |
| Battery Type | Built-in Li-Po 3.7V 4000mAh |
| Input Power | 5V-2A |
| Maximum Power Consumption | 5W |
| Battery Life | 4-6 hours (up to 6H) |
| Charging Time | 2 hours |
| Charging Interface | Type-C |
| OTG Data Port | Type-C (Support) |
| Earphone Jack | Standard 3.5mm interface |
| Dimensions (Depth x Width x Height) | 148mm x 85mm x 35mm |
| Material | Plastic |
| Certifications | CE, RoHS, FCC |
9. Maintenance
9.1. Cleaning
- Use a soft, dry cloth to clean the console's exterior.
- For the screen, use a microfiber cloth specifically designed for electronics.
- Avoid using harsh chemicals or abrasive cleaners.
9.2. Storage
- Store the console in a cool, dry place away from direct sunlight.
- When not in use, store it in the provided protective holdall to prevent scratches and damage.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
10. Troubleshooting
10.1. Common Issues
- Console not turning on: Ensure the battery is charged. Connect to a power source and try again.
- Games lagging or not running smoothly: Some demanding games, especially from Dreamcast, N64, and PSP emulators, may experience performance issues. This is a normal phenomenon due to CPU limitations and game compatibility.
- System freezing: If the system becomes unresponsive, press the restart button located on the top of the console.
- Joystick lights not adjusting: Ensure you are not in 'SCROLLING' mode when attempting to adjust joystick light brightness.
10.2. Important Notes
- Always exit games properly before shutting down the console to prevent data corruption.
- Avoid pressing any buttons during system startup.
11. User Tips
- The EmuELEC software is generally simple to use and comes with many preinstalled games.
- The 4-inch IPS screen offers vivid colors and good contrast for an enjoyable visual experience.
- While many emulators run well, be aware that performance for more demanding systems like Dreamcast, N64, and PSP can be inconsistent.
- Experiment with the interchangeable long and short joystick caps to find your preferred operational sensation.
12. Warranty & Support
For detailed warranty information and further support, please refer to the official user manual PDF available online. You can access the PDF manual by scanning the QR code provided in the physical instruction booklet or by visiting the following link:
For any product-related inquiries or technical assistance, please contact your retailer or the manufacturer's customer service.
13. Frequently Asked Questions (FAQ)
Q: How do I add more games to the console?
A: Games are typically added by transferring ROM files to the TF card. Ensure the files are in the correct format and placed in the appropriate emulator folders on the TF card.
Q: Can I connect external controllers?
A: Yes, the DC40V supports connection with 2.4G dual wireless controllers. These are sold separately.
Q: What is the battery life?
A: The console features a 4000mAh battery, providing approximately 4-6 hours of gameplay, depending on screen brightness, game type, and usage settings.
Q: Is the screen touch-sensitive?
A: No, the DC40V does not feature a touch screen.