1. Introduction
Thank you for choosing the KADIXI High-Fidelity Wired Headset. This manual provides essential information for setting up, operating, and maintaining your new headset. Please read it carefully before use to ensure optimal performance and longevity of your device.
2. Package Contents
- KADIXI High-Fidelity Wired Headset (Type-C, 3.5mm, or C to L connector, depending on model)
- User Manual (this document)
3. Setup Instructions
This headset is a wired device that utilizes Bluetooth for initial connection and optimal functionality, especially for C to L (Lightning) and some Type-C models. 3.5mm models typically plug in directly without Bluetooth pairing.
3.1 Initial Connection (C to L and Bluetooth-enabled Type-C models)
- Turn on Bluetooth: On your mobile device (phone or tablet), navigate to Settings and ensure Bluetooth is turned ON.
- Insert Headset: Plug the headset connector firmly into your device's charging/audio port.
- Connect via Prompt: A pop-up window may appear (e.g., "Connect with iCloud" or similar). Click to connect.
- Connection Confirmation: The window will close automatically upon successful connection.
Note: If no window pops up after a few seconds, open your device's Bluetooth settings, look for a device named "Lightning" (or similar, depending on your connector type), and tap to connect. For subsequent uses, the headset should automatically connect to your device within 2-8 seconds.
3.2 Direct Connection (3.5mm and some Type-C models)
For 3.5mm and some Type-C models, simply plug the headset directly into your device's audio port. Bluetooth pairing is not required for these variants.

Figure 3.1: Visual guide for connecting the headset via Bluetooth on a smartphone. Text on image indicates "C to L iPhone14 below series Need to connect Bluetooth" and "Type-c 3.5mm Plug in directly".
4. Operating Instructions
Your KADIXI headset features an in-line remote control with a hidden microphone for easy management of calls and music playback.
4.1 Call Management
- Answer Call: Click the central button once.
- Decline Call: Long press the central button.
- End Call: Click the central button once during a call.
4.2 Music Playback
- Play/Pause: Click the central button once.
- Next Track: Click the central button three times.
- Previous Track: Click the central button two times.
- Volume Up: Press the "+" button.
- Volume Down: Press the "-" button.

Figure 4.1: In-line remote control showing volume buttons (+/-) and central multi-function button with corresponding actions for calls and music.
5. Maintenance and Care
- Cleaning: Gently wipe the earbuds and cable with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the headset in a clean, dry place. Avoid extreme temperatures.
- Cable Care: The headset cable is thin; avoid sharp bends, excessive pulling, or tangling to prevent damage.
- Moisture: This headset is NOT waterproof. Keep it away from water, rain, and excessive humidity.
6. Troubleshooting
6.1 No Sound or Poor Sound Quality
- Check Connection: Ensure the headset is fully plugged into your device. For Bluetooth-enabled models, verify it is successfully paired and connected in your device's Bluetooth settings.
- Volume Levels: Check the volume level on both your device and using the headset's in-line controls.
- Device Output: Ensure your device's audio output is directed to the headset.
- Earwax Buildup: Clean your ears and the earbud mesh gently, as earwax can obstruct sound.
- Cable Damage: Inspect the cable for any visible signs of damage or fraying.
6.2 Microphone Not Working
- Check Connection: Ensure the headset is fully plugged in and connected.
- Device Permissions: On your device, check privacy settings to ensure the application you are using has permission to access the microphone.
- Microphone Obstruction: Ensure the microphone hole on the in-line remote is not blocked.
6.3 Connection Issues (Bluetooth-enabled models)
- Bluetooth On: Confirm Bluetooth is enabled on your device.
- Re-pair: If issues persist, "forget" the headset in your device's Bluetooth settings and repeat the initial setup steps.
- Device Compatibility: Ensure your device's operating system is up to date.
7. Specifications
| Feature | Description |
|---|---|
| Brand | KADIXI |
| Material | Ceramic, ABS |
| Communication | Wired (Bluetooth for initial connection/functionality on some models) |
| Style | Wired In-ear Headphones |
| Vocalism Principle | Hybrid Technology |
| Active Noise-Cancellation | Yes |
| Control Button | Yes |
| Volume Control | Yes |
| With Microphone | Yes |
| Sound Isolating | Yes |
| Waterproof | No |
| Connector Types | 3.5mm, Type-C, C to L (Lightning) |
| Certifications | CE, RoHS |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 16 cm x 15 cm x 1 cm |
| Package Weight | 0.017 kg |

Figure 7.1: Available connector types: 3.5mm (for iPhone 5/5s/6/6plus/6s/6splus, iPad), Type-C (for iPhone 15, Xiaomi, Samsung, Android), and C to L (for iPhone 7/7plus/8/8plus/X/Xr/Xsmax/12/13/14).
8. User Tips
- Optimal Sound: For the best audio experience, ensure your ears are clean, as earwax can affect sound clarity.
- Cable Durability: The headset cable is designed to be lightweight. Handle it with care to avoid damage from excessive pulling or sharp bends.
- Compatibility Check: Always verify the correct connector type (3.5mm, Type-C, or C to L) for your specific device model before purchase and use.
9. Warranty and Support
For any warranty claims, technical support, or inquiries regarding your KADIXI High-Fidelity Wired Headset, please contact your original seller or the point of purchase. Please retain your proof of purchase for warranty services.