1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko Car Rear View Camera. This camera is designed to enhance safety during reversing and parking maneuvers for various vehicles, including pickups, RVs, vans, campers, and trucks, when connected to compatible multimedia MP5 monitors (4.3, 5, or 7 inches).
Package Contents:
- 1x Car Rear View Camera
- 1x Video Cable (6 meters)
- 1x Power Cable
Video: Overview of the Bileeko Car Rear View Camera and its components.
2. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Bileeko |
| Guiding Line | Yes |
| Video Cable Length | 6M |
| Connection Type | Wire |
| Alarm Type | Rear Side |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| Power Mode | Room electrical/hard wiring |
| Operating Voltage | DC 12V (9-35V for monitor, 12-24V for camera) |
| Placement Option | Rear |
| Driving Position | Universal |
| Battery Properties | Without Battery |
| Applicable Models | Universally Applicable (Pickup, RV, Van, Camper, Truck) |
| Camera Dimensions (approx.) | 3.4cm (1.34 inch) width, 3cm (1.18 inch) height |
| Video System | PAL/NTSC (auto-switching for monitor) |
| Pixel Resolution | 480*272 / 800*480 (depending on monitor) |
| Package Weight | 0.179 kg |
| Package Dimensions | 13cm (L) x 8cm (W) x 5cm (H) |
Image: Camera dimensions for installation planning.
3. Installation and Setup
3.1 Camera Placement
The camera is designed for rear placement. For optimal viewing and to utilize the guiding lines effectively, it is recommended to install the camera above the license plate. Ensure the camera has a clear, unobstructed view of the area behind the vehicle.
Image: Recommended camera installation position.
3.2 Wiring Diagram
Follow the wiring diagram carefully to ensure correct connection of the camera to your vehicle's power supply and monitor. The monitor is not included with the camera.
Image: Wiring diagram for camera and monitor connection.
- **Camera Power Connection:** Connect the red wire from the camera's power cable to the positive (+) terminal of your vehicle's reversing lamp. Connect the black wire to a reliable ground (GND) point on the vehicle chassis. This ensures the camera powers on automatically when the vehicle is put into reverse.
- **Video Signal Connection:** Connect the yellow RCA video output cable from the camera to the video input (typically labeled AV1 or AV2, or 'Video 2 Reverse Prior') on your multimedia MP5 monitor.
- **Monitor Power Connection (if applicable):** If your monitor is not already powered, connect its power input to a suitable DC 12V (or 9-35V) power source in your vehicle. Ensure the monitor's power is also connected to the reversing lamp's positive terminal if you want it to activate automatically with reverse gear.
Important Tips for Setup:
- Confirm that both the monitor and camera are connected correctly and powered on normally.
- If the monitor powers on without a video input, the screen may display black or blue. This is normal. Connect the camera to the monitor to use it.
4. Operation
Once properly installed and connected, the Bileeko Car Rear View Camera operates automatically when your vehicle is shifted into reverse gear. The video feed from the camera will be displayed on your connected monitor.
4.1 Guiding Lines
The camera features integrated guiding lines (parking lines) that appear on the monitor display. These lines assist in judging distance and trajectory while reversing, making parking safer and easier.
4.2 Day and Night Vision
The camera is equipped with night vision capabilities to provide clear images even in low-light conditions. The image quality adapts to ambient light, ensuring visibility during both day and night.
Image: Day and night vision comparison with guiding lines.
5. Maintenance
- **Cleaning:** Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid using abrasive cleaners or solvents that could damage the lens.
- **Cable Inspection:** Periodically check all cables and connections for any signs of wear, damage, or corrosion. Ensure connections remain secure.
- **Environmental Care:** While the camera is designed to be durable and waterproof, avoid exposing it to extreme temperatures or harsh chemicals.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on monitor / Black or blue screen |
|
|
| Distorted or poor image quality |
|
|
| Guiding lines not visible |
|
|
7. User Tips
- **Test Before Finalizing:** Before securing all wiring and panels, perform a full test of the camera system to ensure it functions correctly when the vehicle is in reverse.
- **Professional Installation:** If you are uncomfortable with automotive electrical work, consider professional installation to avoid damage to your vehicle or the camera system.
- **Monitor Compatibility:** Ensure your multimedia MP5 monitor supports standard video input (RCA) and is compatible with PAL/NTSC video systems for optimal performance.
8. Warranty and Support
For any technical assistance or support inquiries, please refer to the official product page or contact the seller directly. A detailed user manual in PDF format is available for download at User manual (PDF).