SMAILWOLF MK87

Contents

SMAILWOLF MK87 Mechanical Keyboard User Manual

Model: MK87

1. Introduction

Thank you for choosing the SMAILWOLF MK87 Mechanical Keyboard. This keyboard features a versatile three-mode connection (Bluetooth, 2.4G Wireless, and Wired USB-C), an 87-key layout, hot-swappable switches, and customizable backlighting, designed for both gaming and office use.

2. Package Contents

  • SMAILWOLF MK87 Mechanical Keyboard
  • USB Type-C Cable (1.5M)
  • 2.4G Wireless Receiver
  • User Manual (this document)

3. Keyboard Layout and Features

The MK87 features an 87-key layout, retaining essential functional keys while offering a more compact design than full-size keyboards.

SMAILWOLF MK87 Keyboard Layout

Figure 1: SMAILWOLF MK87 Keyboard Layout (Green variant shown)

87-Key Column Layout Diagram

Figure 2: 87-Key Column Layout Diagram, illustrating space saving.

Adjustable Support Tripod

The keyboard is equipped with double support tripods, allowing you to adjust the typing angle for improved ergonomics and reduced hand burden during long periods of use.

Adjustable Double Support Tripod

Figure 3: Adjustable double support tripod for ergonomic typing.

4. Setup and Connection

The MK87 keyboard supports three connection modes: 2.4G Wireless, Bluetooth, and Wired USB-C. You can switch between modes using the toggle switch located on the top edge of the keyboard, near the ESC key.

Mode Switch Diagram

Figure 4: Mode switch for Bluetooth, Wireless (2.4G), and Wired connections.

Three-Mode Chaining Diagram

Figure 5: Three-mode chaining adapting to multiple systems (Desktop, Laptop, Mobile/Tablet).

4.1. 2.4G Wireless Connection

  1. Locate the 2.4G wireless receiver.
  2. Switch the mode toggle on the keyboard to the "2.4G" position.
  3. Plug the 2.4G receiver into an available USB port on your computer.
  4. The keyboard should automatically connect. If not, press FN + 4$ to initiate pairing. The indicator light for 2.4G will flash rapidly, then become solid upon successful connection.

4.2. Bluetooth Connection

The keyboard supports Bluetooth 5.1 and can store up to three Bluetooth devices.

  1. Switch the mode toggle on the keyboard to the "BT" position.
  2. To enter pairing mode for a specific slot, press and hold one of the following key combinations:
    • FN + 1! (for BT1)
    • FN + 2@ (for BT2)
    • FN + 3# (for BT3)
    The indicator light for the selected Bluetooth slot will flash rapidly, indicating it's in pairing mode.
  3. On your device (computer, tablet, smartphone), enable Bluetooth and search for new devices.
  4. Select "MK87" (or similar) from the list of available devices to connect.
  5. Once connected, the indicator light on the keyboard will become solid.
  6. To switch between paired Bluetooth devices, short press FN + 1!, FN + 2@, or FN + 3#.

4.3. Wired USB-C Connection

  1. Connect the provided USB Type-C cable to the keyboard's Type-C port.
  2. Connect the other end of the USB cable to an available USB port on your computer.
  3. Switch the mode toggle on the keyboard to the "OFF" position. This activates the wired mode.
  4. The keyboard will be recognized by your computer as a standard USB keyboard.
Connection Mode Instructions

Figure 6: Detailed connection mode instructions.

5. Operating Instructions

5.1. FN Function Shortcut Keys

The FN key, located next to the right ALT key, can be combined with other keys to access various functions, including media control, system shortcuts, and backlight adjustments.

FN Function Shortcut Key Table

Figure 7: FN function shortcut key table.

Table 1: FN Function Shortcut Keys
Key CombinationFunction
FN + F1Musicians (Media Player)
FN + F2Volume -
FN + F3Volume +
FN + F4Sound off (Mute)
FN + F5Stop
FN + F6Previous song
FN + F7Play/Pause
FN + F8Next song
FN + F9Mail
FN + F10Home page
FN + F11The Reckoner (Search)
FN + F12Search
FN + WINLock WIN key
FN + WSwitching Windows systems
FN + QSwitching MAC systems
FN + ESCRestore factory settings (hold for 3 seconds)

5.2. Backlight Control

The keyboard features various backlight effects and adjustments.

  • FN + DEL: Switch backlight effects.
  • FN + ↑: Increase backlight brightness.
  • FN + ↓: Decrease backlight brightness.
  • FN + ←: Decrease backlight speed/direction.
  • FN + →: Increase backlight speed/direction.
  • FN + PRT: Custom lighting 1.
  • FN + SCR: Custom lighting 2.
  • FN + PAU: Custom lighting 3.
  • FN + INS: Light recording on/off.
  • FN + HOME: Switch side light effects.
  • FN + PGUP: Turn off backlight.
Keyboard with RGB Backlighting

Figure 8: Keyboard showcasing RGB backlighting.

Bright Light Effect

Figure 9: Bright light effect illuminating the desktop.

5.3. Full-Key Rollover

The MK87 supports full-key rollover, meaning all keys pressed simultaneously will be registered accurately without conflict. This ensures precise and quick instruction conveyance, preventing input stuck errors.

6. Maintenance

6.1. Cleaning the Keyboard

  • Disconnect the keyboard from your computer before cleaning.
  • Use a soft, lint-free cloth lightly dampened with water or a mild cleaning solution to wipe the keycaps and keyboard surface.
  • For dust and debris between keys, use compressed air or a small brush.
  • Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the keyboard's finish.

6.2. Battery Care

The keyboard is equipped with a 4000mAh large-capacity lithium battery for long endurance.

  • Charge the keyboard using the provided USB Type-C cable connected to a standard USB power source (e.g., computer USB port, USB wall adapter).
  • Avoid fully discharging the battery frequently to prolong its lifespan.
  • If storing the keyboard for an extended period, charge it to about 50% before storage.
  • Do not expose the keyboard to extreme temperatures.
4000mAh Large Capacity Battery

Figure 10: Keyboard highlighting 4000mAh large capacity and long endurance.

6.3. Hot-Swappable Switches

The MK87 features a hot-swappable PCB design, allowing you to change mechanical switches without soldering. This enables customization of the typing feel.

  • To remove a switch, use a switch puller tool (not included) to gently grip the top and bottom of the switch and pull it straight up.
  • To install a new switch, align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure the pins are not bent.
Hot-Swappable PCB Design

Figure 11: Close-up of hot-swappable mechanical switches.

7. Troubleshooting

  • Keyboard not responding:
    • Ensure the keyboard is charged.
    • Check the connection mode switch (2.4G, BT, OFF) matches your intended connection.
    • For wired mode, ensure the USB-C cable is securely connected to both the keyboard and computer.
    • For 2.4G wireless, ensure the receiver is properly plugged in and try a different USB port.
    • For Bluetooth, ensure the keyboard is paired correctly and try re-pairing.
  • Keys not registering:
    • If using hot-swappable switches, ensure they are fully seated in the PCB.
    • Clean any debris that might be under the keycap or switch.
  • Backlight not working:
    • Ensure the backlight is not turned off (FN + PGUP).
    • Adjust brightness using FN + ↑/↓.
  • Keyboard behaving erratically:
    • Perform a factory reset by holding FN + ESC for 3 seconds.

8. Specifications

Keyboard Parameter Table

Figure 12: Keyboard parameter table with detailed specifications.

Table 2: SMAILWOLF MK87 Technical Specifications
FeatureDetail
Product ModelMK87
Operating Voltage5V/DC±5%
Working Current≤480mA
Transmission Mode2.4G Wireless / Bluetooth / Wired (USB-C)
Product Size (L×W×H)363mm × 120mm × 36mm
Weight830g ± 10g
Wire Length1.5M (USB Type-C)
Keyboard TypeThree-mode Wireless Light-Emitting Mechanical Keyboard
Key Layout87 Keys (Russian Layout)
Battery Capacity4000mAh
Compatible SystemWindows 2000 / XP / VSTA / ME / Windows 7 / 10 / 11
Operation StyleMechanical
Interface TypeUSB (Type-C)
Product Parameter Dimensions

Figure 13: Product parameter diagram showing keyboard dimensions.

9. User Tips

  • Switch Sound Profile: This keyboard features mechanical switches that produce an audible click sound, similar to a classic typewriter. This is a characteristic of the switch type (e.g., blue switches) and is preferred by some users for tactile and auditory feedback. If you prefer a quieter typing experience, consider swapping the switches for a different type (e.g., linear or tactile non-clicky switches) due to the hot-swappable design.
  • Battery Life: To maximize battery life in wireless modes, consider turning off the backlight when not needed or reducing its brightness.

10. Warranty and Support

For warranty information, technical support, or any inquiries regarding your SMAILWOLF MK87 keyboard, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.