1. Introduction
The Wenzhi B100 is a ZigBee 24G mmWave radar human presence sensor designed for smart home automation. It accurately detects human presence, static states, micro-motions, and larger movements within a specified area. This sensor integrates with Tuya Smart Life and other ZigBee platforms, enabling intelligent scene linkages for lighting, security, and comfort.
Figure 1: Wenzhi B100 Sensor with its mobile application interface.
2. Package Contents
Please check the package for the following items:
- Human Presence Sensor (Wenzhi B100) x 1
- User Manual x 1
Note: AAA batteries and a ZigBee gateway (hub) are not included and must be purchased separately.
3. Product Overview
The Wenzhi B100 sensor features a compact design with advanced 24Ghz radar technology for precise detection. It includes an illuminance sensor for ambient light monitoring and is powered by AAA batteries for flexible placement.
Figure 2: Key features and applications of the Wenzhi B100 sensor.
3.1 Sensor Components
- Reset Button: Used for pairing and factory reset.
- PIR Sensor: Passive Infrared sensor (for motion detection).
- Light Sensor: Detects ambient illuminance.
- Battery Compartment: Holds 2x AAA batteries.
- LED Indicator: Shows status (pairing, initialization).
- Angle Adjustment Bracket: Allows for flexible mounting and aiming.
Figure 3: The sensor's adjustable angle bracket for versatile positioning.
4. Setup
4.1 Battery Installation
- Locate the battery compartment on the back of the sensor.
- Open the battery cover.
- Insert two (2) AAA batteries, ensuring correct polarity (+/-).
- Close the battery cover securely.
Upon successful battery installation, the LED indicator will flash once, then twice after approximately 5 seconds, indicating successful initialization.
Figure 4: Battery installation for the Wenzhi B100 sensor.
4.2 Mounting the Sensor
The sensor comes with an adjustable bracket for flexible mounting options:
- Wall Mount: Attach the bracket to a wall using appropriate screws (not included). The sensor can then be angled as needed.
- Tabletop Placement: The sensor can also be placed on a flat surface without mounting, using its base for stability.
Choose a location that provides an unobstructed view of the area you wish to monitor. Avoid placing it near sources of interference like fans, curtains, or swaying plants that could cause false detections.
4.3 Pairing with ZigBee Gateway (Tuya Smart Life App)
A ZigBee gateway (hub) is required to connect the sensor to your smart home system.
- Ensure your ZigBee gateway is powered on and connected to your home network.
- Open the Tuya Smart Life app (or your compatible ZigBee hub app).
- Put the sensor into pairing mode: Press and hold the reset button on the sensor for more than 5 seconds until the LED indicator starts flashing rapidly.
- In the app, tap the '+' icon (usually in the top right corner) to add a new device.
- Select 'Add Device' or 'Scan' and follow the on-screen prompts to discover the sensor.
- Once detected, confirm the device addition. The LED indicator on the sensor will turn off when successfully paired.
- You can then rename the sensor and assign it to a room within the app.
5. Operating Instructions
Once paired, you can manage and configure your sensor through the Tuya Smart Life app.
5.1 App Interface Overview
The app interface for the sensor typically displays:
- Product Name: Customizable name for your sensor.
- Status Display: Shows current presence status (e.g., 'Existence state').
- Parameter Display: Current settings for detection distance, sensitivity, delay, etc.
- Logs/History: Records of presence detection and illuminance changes.
- Linkage/Automation: Section to create smart scenes.
- Settings: Access to detailed sensor configurations.
5.2 Parameter Settings
You can adjust various parameters to optimize the sensor's performance for your specific needs:
- Detection Distance: Adjustable from 1 to 6 meters (default 5m).
- Trigger Sensitivity: Adjustable from 1 to 10 (default 6). Higher values mean more sensitive detection.
- Presence Sensitivity: Adjustable from 1 to 10 (default 6). Controls sensitivity for static presence.
- Delay Time: Sets the duration (10-180 seconds, default 10s) before the sensor reports 'no presence' after detection ceases.
- Illuminance Sensor: Provides readings from 0 to 10000 lux, which can be used in automations.
- Lower Battery Alert: Toggle to receive notifications when battery is low.
- Motion Alarm: Toggle to enable/disable motion-based alarms.
Figure 5: Adjusting detection parameters within the mobile application.
Note: After adjusting parameters, it may take 5-10 seconds for the sensor to report the modified settings to conserve power.
5.3 Scene Linkage and Automation
Leverage the sensor's capabilities to create smart automations:
- Lighting Control: Turn lights ON when presence is detected and OFF after a set delay, or adjust lighting based on ambient illuminance.
- Security: Trigger an alarm or send notifications if presence is detected in an unoccupied area.
- Comfort: Activate HVAC systems when a room becomes occupied.
Figure 6: The sensor working in conjunction with a ZigBee hub for home automation.
6. Maintenance
6.1 Battery Replacement
When the app indicates a low battery, replace the two AAA batteries following the installation steps in Section 4.1.
6.2 Cleaning
Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the device.
7. Troubleshooting
- No Detection / Inconsistent Detection:
- Check battery level and replace if low.
- Ensure the sensor is aimed correctly at the detection area.
- Increase 'Detection Distance' and 'Trigger Sensitivity' in the app.
- Remove any obstructions in the sensor's field of view.
- False Detections:
- The 24Ghz radar is highly sensitive. Avoid placing the sensor near moving objects like swaying curtains, fans, air conditioning vents, or pets.
- Decrease 'Trigger Sensitivity' and 'Presence Sensitivity' in the app.
- Adjust the sensor's angle to exclude areas with potential interference.
- Sensor Offline in App:
- Check if the ZigBee gateway is online and functioning correctly.
- Ensure the sensor is within range of the ZigBee gateway.
- Replace batteries if they are low.
- Try re-pairing the sensor (Section 4.3).
- Battery Compartment Not Closing Tightly:
- Ensure batteries are inserted correctly and not obstructing the cover.
- Check for any debris in the compartment.
8. Specifications
Figure 7: Detailed specifications and dimensions of the sensor.
| Feature | Specification |
|---|---|
| Model Number | B100 |
| Network | ZigBee 3.0 |
| Radar Frequency | 24Ghz |
| Input Power | 2 x AAA Batteries (DC 3V) |
| Working Temperature | -20℃ to +70℃ |
| Detection Angle | L: 120°, H: 100° |
| Detection Distance | 1 - 6 meters (Default 5m) |
| Trigger Sensitivity | 1 - 10 (Default 6) |
| Presence Sensitivity | 1 - 10 (Default 6) |
| Illuminance Sensor Range | 0 - 10000 lux |
| Delay Time | 10 - 180 seconds (Default 10s) |
| Dimensions (L x W x H) | 72 x 32 x 20 mm (2.83 x 1.26 x 0.79 in) |
9. User Tips
- Battery Compartment: Ensure batteries are correctly seated and the cover is fully closed to prevent issues. If the cover doesn't close tightly, check for any obstructions or misaligned batteries.
- Optimizing Detection Range: For best results, place the sensor in a central location within the desired detection area, free from large obstructions. Experiment with different mounting heights and angles to achieve optimal coverage.
- Minimizing False Triggers: Fine-tune the sensitivity settings in the app. If you experience frequent false detections, try reducing the 'Trigger Sensitivity' and 'Presence Sensitivity' values.
10. Warranty and Support
Wenzhi products are manufactured to high-quality standards. For any issues or support inquiries, please refer to your purchase platform or contact the seller directly. Keep your proof of purchase for warranty claims.
11. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or moisture.
- Do not attempt to disassemble or repair the device yourself.
- Keep the device out of reach of children.
- Dispose of batteries according to local regulations.