Zigbee ZBM-MG24

Contents

Y43A-EFR32MG24 Zigbee 3.0 USB Dongle User Manual

Model: ZBM-MG24

1. Introduction

The Y43A-EFR32MG24 Zigbee 3.0 USB Dongle (Model: ZBM-MG24) is a compact and powerful USB adapter designed to serve as a stable Zigbee coordinator for your smart home network. It offers broad compatibility with popular smart home platforms such as Zigbee2MQTT, Home Assistant, and ZHA, enabling seamless integration of various Zigbee devices.

Y43A-EFR32MG24 Zigbee 3.0 USB Dongle with antenna
Figure 1: Y43A-EFR32MG24 Zigbee 3.0 USB Dongle with its omnidirectional antenna.

2. Safety & Warnings

Warning!

  • This product is only for adult use.
  • Please keep out of reach of children and pets to avoid accidental injury or ingestion.
  • Always check if the installation is correct before use.
  • If there is abnormal noise or equipment error after installation, immediately stop using the device.
  • Follow all instructions for proper use; misuse may cause harm.
  • Store the product in a dry and shady place, away from high temperatures, humidity, and direct sunlight.

3. Package Contents

Please ensure all items are present and undamaged upon unboxing:

  • 1x Zigbee 3.0 USB Dongle (Model: ZBM-MG24)

4. Key Features

  • Compact Design: Ultra-compact Zigbee 3.0 to USB adapter.
  • Broad Platform Compatibility: Fully compatible with Zigbee2MQTT, Home Assistant, and ZHA.
  • High-Performance Chipset: Utilizes the EFR32MG24 chipset for reliable RF communication and network management.
  • Enhanced Signal: Equipped with a 5dBi external omnidirectional antenna for stronger signal strength and wider coverage (up to 250 meters in open environments).
  • Rotatable Antenna: Supports adjustment at multiple angles (90° and 360° rotation) for optimal signal reception.
  • Easy Plug-and-Play: Simple USB connection for quick setup.
  • Detachable Antenna: Features an SMA interface for a detachable external antenna.
Feature overview of the Zigbee USB Dongle
Figure 2: Overview of key features including signal reach, platform compatibility, high gain, coordinator firmware (EZNet 7.4.5), rotatable antenna, EFR32MG24 chipset, and hardware compatibility.
Antenna comparison and signal range diagram
Figure 3: The 5dBi high-gain omnidirectional antenna (20cm) provides further signal reach, with a signal coverage range of more than 250 meters in an open environment, being 5cm taller than ordinary 15cm antennas.

5. Setup Instructions

Before first use, ensure the product is free from any damage.

  1. Connect the Dongle: Plug the Zigbee 3.0 USB Dongle into an available USB port on your server, mini PC, NAS, or Raspberry Pi.
  2. Antenna Adjustment: Adjust the rotatable antenna to an optimal position for best signal reception. The antenna supports 90° and 360° rotation.
  3. Platform Integration:
    • For Home Assistant (ZHA): The dongle should be automatically detected. Follow Home Assistant's ZHA integration setup guide to add it as a new Zigbee coordinator.
    • For Zigbee2MQTT: Configure your Zigbee2MQTT instance to use the serial port assigned to the dongle. Refer to the Zigbee2MQTT documentation for specific configuration details.
    • For OpenHAB: Follow the OpenHAB Zigbee binding documentation to integrate the dongle as your Zigbee gateway.
  4. Firmware: The dongle comes with coordinator firmware based on EZNet 7.4.5.
Zigbee 3.0 USB Dongle supporting various platforms
Figure 4: The Zigbee 3.0 USB Dongle is based on EFR32MG24 and supports Zigbee, Zigbee2MQTT, Home Assistant, and openHAB platforms.

6. Operating Instructions

Once the dongle is successfully integrated with your chosen smart home platform, it acts as the central coordinator for your Zigbee network.

  1. Device Pairing: Initiate the pairing mode on your smart home platform. Then, put your Zigbee end devices (sensors, switches, lights, etc.) into their respective pairing modes. The coordinator will discover and add them to your network.
  2. Network Management: Use your smart home platform's interface to manage your Zigbee devices, create automations, and monitor their status.
  3. Child Devices: The dongle supports a maximum of 32 direct child devices. The total number of child devices is not limited by firmware but depends on the capabilities of the smart home platform used.
Diagram of wide range of supported devices
Figure 5: The dongle is compatible with a wide range of smart home platforms and devices, connecting various Zigbee devices to your smart home system. It supports a maximum of 32 direct children, with no firmware limit on total children, depending on the platform.

7. Maintenance

  • After use, store the product in a dry place and keep it away from children.
  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to extreme temperatures or humidity.

8. Troubleshooting

  • Device Not Detected: Ensure the dongle is firmly plugged into the USB port. Try a different USB port or restart your host system.
  • Zigbee Devices Not Pairing: Ensure the dongle is correctly configured in your smart home platform and that the platform is in pairing mode. Check that your Zigbee end devices are within range and in their pairing mode.
  • Poor Signal/Range: Adjust the antenna position. Ensure there are no major obstructions (e.g., thick walls, metal objects) between the dongle and your Zigbee devices. Consider using Zigbee router devices to extend your network's mesh coverage.
  • Interference: Keep the dongle away from other wireless devices (Wi-Fi routers, Bluetooth devices) that might operate on similar frequencies.

9. Specifications

FeatureDetail
ModelZBM-MG24
Wireless ProtocolZigbee 3.0
ChipsetEFR32MG24
Coordinator FirmwareEZNet 7.4.5
Antenna Type5dBi High Gain Omnidirectional, Detachable (SMA interface)
Antenna Length20 cm
Signal Coverage>250 meters (open environment)
Output Power+20dBm (max)
USB-Serial ChipCP2102N
Input VoltageDC 5V (200mA Max)
Working Temperature-20℃ to 60℃
ColorBlack
MaterialPlastic
Dongle Dimensions (L x W)40mm x 19mm (approx.)
Total Length (with antenna)255mm (approx.)
Max Direct Child Devices32
Dimensions and technical details of the Zigbee USB Dongle
Figure 6: Dimensions of the dongle (40mm length, 19mm width) and total length with antenna (255mm). It is based on EFR32MG24, provides +20dBm output power, features an SMA interface for a detachable external antenna, and uses Zigbee coordinator firmware based on EZNet 7.4.5.

10. Compliance Information

This product is designed to comply with relevant safety, electromagnetic compatibility (EMC), and environmental regulations. Conformity marking (e.g., CE) and related documentation may be required depending on the market where it is sold. This product must comply with all applicable safety and regulatory requirements in the market where it is sold.

11. Manufacturer & EU Representative Information

Manufacturer:

Nanchang sheyu electronic products co., ltd
Room 408, Building C, Ziyang Mingzhu Office Building
No.2999 Ziyang Avenue, Nanchang High-tech Industrial Development Zone
Nanchang City, Jiangxi Province, China
Postal Code: 330000
Email/Telephone: pXhxTIqO3k6xVsIS@163.com / +86 18198434970

EU Authorized Representative:

CET PRODUCT SERVICE LTD.
Osterholzallee 144
Email/Telephone: info@cetproduct.com / +49 15738616277

12. Warranty & Support

For warranty information and technical support, please contact your point of purchase or the manufacturer directly using the contact details provided above. Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.