1. Product Overview
The SAMZHE multi-function crimping tool is a professional-grade network cable crimping tool designed for crimping, cutting, and stripping RJ45 (8P8C), RJ12 (6P6C), and RJ11 (6P4C/6P2C) modular connectors. It is suitable for Cat5, Cat5e, Cat6, Cat6a network cables, telephone lines, and other communication cables. This tool is ideal for network installation, maintenance, and home wiring scenarios.

Image: SAMZHE Multi-function Crimping Tool.
2. Package Contents
- 1 × SAMZHE multi-function crimping tool
- 2 × Replacement cutting blades
- 1 × User manual (this document)

Image: SAMZHE Crimping Tool with two spare blades.
3. Key Features
- 3-in-1 Multi-function: Integrates crimping, wire stripping, and wire cutting functions, one tool meets all network cable production needs.
- Wide Compatibility: Supports RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C/6P2C) crystal heads, compatible with Cat5/Cat5e/Cat6/Cat6a network cables and telephone lines.
- Durable Material: Made of high-hardness carbon steel, with anti-rust and wear-resistant treatment, ensuring a long service life.
- Ergonomic Design: Features a non-slip rubber handle and labor-saving lever structure, reducing hand fatigue during long-term use.
- Replaceable Blades: Equipped with 2 spare blades, easy to replace, ensuring long-term sharp cutting performance.
- Safe & Reliable: Built-in positioning structure ensures accurate crimping, avoiding poor contact or crystal head damage.

Image: Product Function Analysis, showing 6P and 8P ports, flat wire stripping port, round wire stripping port, wire cutting port, non-slip handle, and retaining ring.
4. Product Specifications
| Item | Parameter |
|---|---|
| Brand Name | SAMZHE |
| Model Number | GD-187 |
| Type | Cable Crimper |
| Applicable Crystal Heads | RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C/6P2C) |
| Applicable Cables | Cat5, Cat5e, Cat6, Cat6a network cables, telephone lines |
| Material | High-hardness carbon steel + non-slip rubber handle |
| Weight | About 350g |
| Color | Black + Blue |
| Package Size | 22 × 10 × 3cm |
| Battery Included | No |
| High-concerned chemical | None |
| Package | Yes |
| Origin | Mainland China |

Image: Product packaging for the SAMZHE crimping tool.
5. Setup and Preparation
5.1 Prepare Tools & Materials
- SAMZHE crimping tool
- Network/telephone cable (Cat5/Cat5e/Cat6/Cat6a, etc.)
- Corresponding crystal head (RJ45/RJ12/RJ11)
- Wire stripper (optional, this tool has built-in stripping function)
6. Operation Steps
6.1 Strip the Cable Insulation
- Insert the end of the network cable into the wire stripping slot of the tool (located near the crimping die).
- Hold the handle tightly and rotate the tool 1-2 times to cut through the outer insulation.
- Pull out the cable, remove the cut insulation layer, exposing the 4 pairs of twisted wires inside (about 1.5cm-2cm is appropriate).

Image: Demonstrating how to strip the outer insulation of a network cable using the tool's built-in stripper.
6.2 Arrange the Wires
- Untwist the 4 pairs of twisted wires and arrange them in the standard line sequence. The T568B standard is most commonly used: White-Orange, Orange, White-Green, Blue, White-Blue, Green, White-Brown, Brown. For cross cables, use T568A: White-Green, Green, White-Orange, Blue, White-Blue, Orange, White-Brown, Brown.
- Straighten the wires. Use the cutting slot of the tool to cut the end flat, keeping the length of the exposed wires about 1.2cm-1.5cm. This ensures the wires can be fully inserted into the crystal head.

Image: Connection Standard diagram showing T568A and T568B color codes for network cable wiring.

Image: Fast Wire Cutting, showing the cable being trimmed evenly.
6.3 Insert the Wires into the Crystal Head
- Insert the arranged wires into the crystal head (RJ45/RJ12/RJ11, matching the model). Ensure each wire is inserted to the end of the crystal head, and the copper contacts of the crystal head are in contact with the wires.
- Check that the outer insulation of the cable enters the crystal head by about 0.5cm to avoid loose wires.
6.4 Crimp the Crystal Head
- Select the corresponding crimping die slot (8P for RJ45, 6P for RJ12/RJ11).
- Insert the crystal head with the cable into the die slot, ensuring the crystal head is fully seated.
- Hold the handle tightly with both hands until the two handles are closed completely. The copper contacts of the crystal head will be pressed into the wires to form a firm connection.
- Release the handle and take out the crimped network cable. The production is complete.

Image: Precision Crimping in One Step, showing the crimping interface and the post-crimping display of a crystal head.

Image: Crystal Head Thread Pressing Tutorial, a 6-step visual guide for preparing and crimping a network cable.
6.5 Test the Cable (Optional)
Use a network cable tester to test the connectivity of the crimped cable. Ensure all 8 wires are connected normally, with no open circuit or short circuit.
6.6 Video Demonstration
Video: A demonstration of the SAMZHE multi-function crimping tool, showcasing its stripping, cutting, and crimping capabilities, along with the safety buckle feature.
7. Maintenance & Storage
- After use, wipe the tool with a clean cloth to remove dust and oil stains.
- Store in a dry, cool place to avoid moisture and rust.
- Regularly check the tightness of screws and the sharpness of blades. Replace accessories in time if needed.
8. Blade Replacement Guide
- Use a screwdriver to loosen the fixing screws of the blade on the tool.
- Take out the old blade and insert the new replacement blade into the slot, aligning its position.
- Tighten the fixing screws, ensuring the blade is fixed firmly without looseness.
Note: Be careful of the sharp blade during replacement to avoid cutting your hands.

Image: Diagram showing the dimensions of the sharp and wear-resistant blade (13.9mm length, 10mm width, 0.6mm thickness).
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor cable connection, network disconnection | Wires not inserted to the end of the crystal head; crimping not in place; line sequence wrong | Re-arrange the line sequence, reinsert the wires, re-crimp firmly |
| Blade not sharp, difficult to cut wire | Blade worn; blade loose | Replace the new blade; tighten the fixing screw |
| Crystal head deformed after crimping | Wrong die slot selected; excessive force | Select the correct die slot (8P/6P); use moderate force |
| Cable insulation not cut through | Insulation too thick; blade worn | Adjust the stripping position; replace the new blade |
10. User Tips
- Ensure the wires are fully seated and correctly aligned in the crystal head before crimping to achieve a perfect connection.
- For optimal performance and longevity, regularly clean the tool and apply a small amount of lubricating oil to moving parts.
- When stripping, apply firm but not excessive pressure to avoid damaging the internal wires.
11. Warranty & Support
- This product supports a 12-month quality warranty. If there is any quality problem, please contact our customer service for replacement or refund.
- If you have any questions during use, please contact us through the AliExpress store. We will reply within 24 hours.
12. Safety Precautions
- Do not use for non-designated purposes: This tool is only for crimping RJ series crystal heads. Do not use it to cut hard objects such as steel wire, to avoid damaging the tool.
- Keep away from children: The blade is sharp. Please place the tool out of reach of children.
- Do not over-force: When crimping, use moderate force. Do not use excessive force to avoid damaging the tool or crystal head.