1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of the CARABC Wireless CarPlay Android Auto Module (Model: CX-MIB2A6). This module is designed to integrate wireless CarPlay and Android Auto functionalities into compatible Audi A6 and A7 vehicles from 2012-2018, while retaining original car features.
Figure 1: CARABC Wireless CarPlay Android Auto Module and included tools.
2. Compatibility Check
Before installation, it is crucial to confirm your car's system version to ensure compatibility. This module supports specific Audi A6/A7 models from 2012-2018 with RMC, MMI3G HN+, or MMI3G MHI2 systems.
How to Check Your Car System Version:
- Press the 'Settings' or 'Menu' button on your car's radio.
- Navigate to [Settings].
- Scroll down to 'Version Information'.
- Note the first letters and numbers of the software version.
Refer to the images below to identify your system type:
Figure 2: MMI3G+ system check (Beginning of HN+).
Figure 3: MIB2 system check (Beginning of MHI2).
Figure 4: RMC system check (Beginning of RMC).
The module is compatible with the following systems:
- A6 A7 RMC: 2012-2016
- A6 A7 MMI3G HN+: 2011-2015
- A6 A7 MMI3G MHI2: 2016-2018
3. Product Information
The CARABC module enhances your driving experience by integrating advanced smartphone connectivity into your Audi's infotainment system. It supports both wireless Apple CarPlay and Android Auto, along with screen mirroring capabilities.
Key Features:
- Wireless Apple CarPlay
- Wireless Android Auto
- MirrorLink: AirPlay (for iPhone) & AutoLink (for Android)
- Support for original car camera
- Integration with original steering wheel buttons and knob control
- Voice control functionality (Siri)
Figure 5: Wireless Apple CarPlay, Android Auto, and Mirroring features.
Package Contents:
The package includes the main module and necessary accessories for installation. Note that specific cables may vary slightly depending on the car model and system version.
Figure 6: Product components including the main module and cables.
- Main Module (CX-MIB2A6)
- LVDS Cable
- Power Cable
- CAN Gateway Cable
- WiFi Antenna
- USB Cable
- AUX Cable
4. Specifications
| Technical Specifications | |
|---|---|
| Operating Voltage | 9-16V |
| Operating Temperature | -30°C to +75°C |
| Stored Temperature | -30°C to +85°C |
| Environment Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Power Consumption | 500mA (rated), 3A (Max) |
| Shutdown Current | 3 mA (Clock is on) |
| Quiescent Current | Less than 3 mA |
| Charging Current | ≤2A (When USB charging current > 1A, the host activates circuit protection to control current below 1.5A to avoid burning the product.) |
5. Installation and Setup
This section provides general guidance for installing the module. Professional installation is recommended due to the complexity of car electronics. Ensure the car's power is disconnected before starting installation.
5.1. Dip Switch Configuration
The dip switches on the module must be configured correctly according to your car's screen size and model year. CAUTION: Ensure the CarPlay POWER is disconnected when adjusting the dip switches.
Figure 7: Dip Switch Configuration for MIB2 Audi Setting.
| MIB2 AUDI SETTING | Car Model | Screen Size | ||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 4 | 5 | ||
| ON | ON | OFF | OFF | OFF | 16-18 A6/A7 | 5.8" (400x240) |
| OFF | OFF | ON | OFF | OFF | 6.5"/7"/8" (800x480) | |
5.2. Wiring Diagram and Connections
Follow the wiring diagram carefully to connect the module to your car's system. Ensure all connections are secure.
Figure 8: CX-MIB2A6 Installation Wiring Diagram.
- (1) WiFi Antenna: Connect the WiFi antenna.
- (2) LVDS: Connect to the original car's LVDS.
- (3) Connect to the original cable end.
- (4) Connect to the original car's main unit.
- (5) Connect the original car power terminal male.
- (6) USB port: For connecting phone, USB disk, or software updates.
- (7) AUX: Audio output.
- (8) Connect the original car power terminal female.
- (9) REAR-CVBS: Rear view input (Connect the rear-view, front-view camera power supply).
- (10) FRONT-CVBS: Front view input.
- Power Wires: Yellow (B+), Red (ACC), Black (GND).
- Camera Power Supply: Blue wire.
- Reverse Detection Wire: Brown wire (Connect to the rearview light cable or 360 panoramic detection line).
- 360 Panoramic Box TXD: White-TX.
- 360 Panoramic Box RXD: White-Black-RX.
Attention: When plugging in the host end, ensure all connections are securely fastened.
5.3. Adding Reversing Video Input
The module supports adding a reversing camera input.
- Cam-power: Connect to camera power.
- Rear-CVBS/AHD720P (25FPS/30FPS): Connect to camera input.
Note: If a reverse camera is added, the original camera function might be turned off.
6. Operation
Once installed, the module allows you to use Wireless CarPlay and Android Auto, control functions via voice, and utilize original car controls.
6.1. Wireless CarPlay Connection
To connect your iPhone wirelessly to CarPlay:
- On your iPhone, enable Wi-Fi and Bluetooth.
- On the car's screen, navigate to the module's settings and click "Discover and connect device".
- Select the Bluetooth device named "CX_BT....." and pair it with your iPhone.
Figure 9: Wireless CarPlay Connection Steps.
Note: Before entering the installation system, connect your phone to the original car's Bluetooth and select both call and media. Also, select the original car audio on the BT stereo interface. Alternatively, switch the original car sound channel to the AUX channel.
6.2. Wireless Android Auto Connection
To connect your Android phone wirelessly to Android Auto:
- On your Android phone, enable Wi-Fi and Bluetooth.
- On the car's screen, navigate to the module's settings and click "CX-BTXXXX".
- Pair your Android phone with the device.
Figure 10: Wireless Android Auto Connection Steps.
6.3. Voice Control
The module supports voice control (e.g., Siri) for hands-free operation of navigation, music, calls, and other functions.
Figure 11: Voice Control functionality.
6.4. Original Car Function Control
The module is designed to retain the functionality of your original car's controls, including steering wheel buttons and the central control knob.
Figure 12: Original car controls integration.
Figure 13: Original Vehicle Button Control functions.
- Steering Wheel Buttons: Use for volume up/down, voice awakening, call answering/ending.
- Central Control Knob:
- Long press to switch systems.
- Rotate to move the cursor.
- Short press to confirm.
- Long press to confirm to activate speech control.
Note: Due to different car models, the exact operation method may vary. Consult customer service if needed.
6.5. Product Demonstration Video
Video 1: Demonstration of CarPlay functionality and wiring connections in an Audi vehicle.
7. Maintenance
To ensure the longevity and optimal performance of your CARABC module, follow these general maintenance guidelines:
- Keep the module and connections dry and free from dust.
- Avoid exposing the module to extreme temperatures or direct sunlight for prolonged periods.
- Do not attempt to open or modify the module, as this will void the warranty.
- Regularly check cable connections to ensure they remain secure.
- For cleaning, use a soft, dry cloth. Avoid harsh chemicals or abrasive materials.
8. Troubleshooting
If you encounter issues with your CARABC module, refer to the following troubleshooting steps:
Figure 14: Car Settings for Reverse Camera and Audio.
- Screen Not Displaying Normally: Check the LVDS cable connection and verify the DIP Switch settings are correct for your car model and screen size.
- Sound Problems: Ensure the Multimedia and install system settings of the original car are correctly configured. Specifically, check the audio settings to ensure the original Bluetooth audio is set to "off" and the original multimedia selection is "AUX" (if using the module's audio output).
- Mainframe Pilot Lamp Not Working: Check the power cable connection to the module and inspect the fuse for any damage.
If the issue persists after following these steps, please contact customer support.
9. User Tips
- Verify Compatibility: Always double-check your Audi's model year and MMI system version against the product's compatibility list before purchasing and installing to avoid issues.
- Professional Installation: While this manual provides guidance, professional installation by a qualified technician is highly recommended to prevent damage to your vehicle's electronics.
- Audio Source: Ensure your car's audio source is set to AUX for the module's audio to play through the car speakers.
10. Frequently Asked Questions (FAQ)
- Q: Is this module compatible with an Audi Q3 2020?
- A: No, this specific module (CX-MIB2A6) is designed for Audi A6 and A7 models from 2012-2018. Please refer to the compatibility section (Section 2) to confirm your vehicle's system version and model year.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact CARABC customer service through the retailer where you purchased the product. Keep your proof of purchase for warranty claims.
A detailed user manual (PDF) is available for download: View User Manual PDF