1. Introduction
Thank you for purchasing the Aramox Pocket Digital Inclinometer. This device is designed for precise angle and slope measurements in various applications, including woodworking and home projects. Its compact size, magnetic base, and clear digital display make it an essential tool for accurate measurements.
2. Safety Information
- WARNING: CHOKING HAZARD – This product contains small parts and is not suitable for children under 3 years of age.
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping the device or subjecting it to strong impacts.
- Do not attempt to disassemble or modify the inclinometer, as this will void the warranty and may cause damage.
- Use only the provided USB cable for charging.
3. Package Contents
Please check the package for the following items:
- 1 x Pocket Digital Inclinometer
- 1 x USB Type-C Charging Cable

Figure 1: Inclinometer and USB Charging Cable
4. Product Overview
Familiarize yourself with the components of your digital inclinometer:

Figure 2: Inclinometer Features and Controls
- On/Off Key: Powers the device on or off.
- Function Key (M): Toggles between relative and absolute measurement modes, and angle/slope units.
- Display: Shows measurement readings, battery level, and mode indicators.
- Battery Level Indicator: Shows remaining battery charge.
- Relative Measurement Indicator (REF): Appears when in relative measurement mode.
- Data Retention Indicator (H): Appears when data hold function is active.
- Measuring Range Indicator: Shows the current measurement unit (degrees or percentage).
- Type-C Charging Port: For connecting the USB charging cable.
- Magnetic Base: Allows strong adsorption to metal surfaces for stable measurements.
5. Setup
5.1 Charging the Device
The inclinometer is powered by a built-in 3.7V lithium battery. Before first use, or when the battery indicator is low, charge the device:
- Locate the Type-C charging port on the side of the inclinometer.
- Connect the provided USB Type-C cable to the inclinometer and the other end to a standard USB power adapter (not included) or a computer USB port.
- The battery indicator on the display will show charging status. Charge until the battery icon indicates full charge.

Figure 3: Lithium Direct Charge via Type-C Port
6. Operating Instructions
6.1 Power On/Off
- Press the On/Off Key (power symbol) to turn the device on.
- Press and hold the On/Off Key for a few seconds to turn the device off.
6.2 Measurement Units
The inclinometer supports two units of measurement: degrees (°) and percentage (%).
- Press the Function Key (M) briefly to switch between degree (°) and percentage (%) display modes.

Figure 4: Angle/Slope Two Units of Measurement
6.3 Relative and Absolute Measurement
The device can measure angles relative to a set zero point (relative measurement) or relative to the true horizontal plane (absolute measurement).
- Absolute Measurement: When powered on, the device defaults to absolute measurement. Place the inclinometer on a horizontal surface, and it will display the angle relative to true horizontal.
- Relative Measurement: To measure an angle relative to a specific surface, place the inclinometer on that surface and briefly press the Function Key (M). The display will show 'REF' and reset to 0.00°. Subsequent measurements will be relative to this new zero point. Press the Function Key (M) again to return to absolute measurement.
6.4 Data Hold Function
To freeze the current measurement on the display:
- Briefly press the On/Off Key while the device is on. The 'H' indicator will appear, and the reading will be held.
- Press the On/Off Key again to release the hold and resume live measurement.
6.5 Using the Magnetic Base
The inclinometer features a strong magnetic base for convenient and stable measurements on ferrous metal surfaces.
- Simply place the magnetic base onto the metal workpiece to be measured. The device will adhere firmly, allowing for hands-free operation and accurate readings.

Figure 5: Built-in Magnet for Strong Adsorption
7. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Storage: When not in use, turn off the device and store it in a dry place, away from direct sunlight and extreme temperatures. Keep away from children.
- Battery: For long-term storage, ensure the battery is partially charged (around 50%) to prolong its lifespan.
8. Troubleshooting
8.1 Device Turns Off Automatically
The inclinometer features intelligent power-saving functions:
- The screen backlight will turn off after 30 seconds of inactivity.
- The device will automatically shut down after 3 minutes of no response or activity.
This is normal operation to conserve battery life. Simply press any key to reactivate the screen or power on the device again.

Figure 6: Intelligent Power Saving Features
8.2 Inaccurate Readings
- Ensure the measurement surface is clean and free of debris.
- Check if the device is stable on the surface being measured.
- Recalibrate the absolute zero by placing the device on a known level surface and restarting it, or by using the relative measurement function.
9. Specifications
| Parameter | Value |
|---|---|
| Measuring Range | 4 x 90° |
| Display Resolution | 0.05° |
| Accuracy | ±0.2° |
| Repeatability | 0.1° |
| Battery | 3.7V Lithium Battery 260mAh |
| Operating Temperature | -10℃ ~ 50℃ |
| Work Humidity | ≤85% |
| Material | ABS |
| Product Size | Approx. 36 x 36 x 20mm (1.42 x 1.42 x 0.79in) |
| Certifications | CE, RoHS, FC |

Figure 7: Device Specifications
10. User Tips
No specific user tips are available at this time.
11. Warranty and Support
For warranty information or technical support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.