MARPOU Smart LED Fan Light

Contents

MARPOU Smart LED Fan Light User Manual

Model: Smart LED Fan Light

Brand: MARPOU

1. Introduction

Thank you for choosing the MARPOU Smart LED Fan Light. This product combines modern lighting with a powerful, quiet fan, offering smart control options and versatile features for your home. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Component List

  • Ceiling light main body × 1
  • Install mounting panel × 1
  • Screw accessories × 1
  • Remote control × 1
  • Product Installation Manual × 1 (This document)

3. Safety Notice

  1. The power supply must be disconnected before installation to ensure operational safety. Professional electricians are recommended for installation.
  2. Lamps must be fixed to load-bearing structures such as concrete or thick wooden boards, and should not be directly installed on soft ceiling layers like gypsum boards.
  3. Wiring must correspond: connect the live wire to the L terminal and the neutral wire to the N terminal, ensuring proper insulation.
  4. Do not disassemble or modify lamps without authorization, as this may damage internal circuits or create safety hazards.

4. Installation Instructions

Follow these steps for safe and correct installation of your Smart LED Fan Light:

  1. Power outage safety preparation: Please make sure to disconnect the main power switch before operation to prevent electric shock.
  2. Fixed coupler base: Align the coupler base with the ceiling mounting position and screw it in place to ensure a stable fit between the base and the ceiling.
  3. Line connection: Refer to the wiring diagram and connect the live wire (L) of the coupler base to the live wire of the power line, and connect the neutral wire (N) to the neutral wire of the power line, ensuring that the wiring is secure and insulated properly.
  4. Install the main body of the fan light: Hold the main body of the fan lamp, align it with the interface of the coupler base, rotate it clockwise to lock the buckle structure between the main body and the base, and complete the mechanical installation.
  5. Power on test: After confirming that all installation steps are correct, restore the power and test whether the fan and lighting functions are functioning properly.
Installation Instructions Diagram
Figure 1: Step-by-step diagram for installing the Smart LED Fan Light.

5. Operating Instructions

5.1. General Control Methods

The Smart LED Fan Light can be controlled via the included 2.4GHz remote control, the FanLamp Pro App on your smartphone, or a standard wall switch. The device features a memory function, retaining your last settings.

5.2. Lighting Functions

  • Stepless Dimming & CCT Adjustment: Adjust brightness from 0% to 100% and color temperature from 2700K (warm white) to 6500K (cool white) to suit any mood or activity.
  • Amber Night Light Mode: A soft, warm golden backlight provides non-glaring illumination for nighttime use, ideal for bedrooms.
Smart LED Fan Light with adjustable color temperature and airflow
Figure 2: The Smart LED Fan Light demonstrating various light color temperatures and fan operation.
Different light modes for different rooms
Figure 3: Example lighting modes for different spaces: Warm White for Bedroom, Cold White for Living Room, Neutral Light for Study Room.

5.3. Fan Functions

  • 6 Adjustable Wind Speeds: Choose from 6 fan speeds: Speeds 1-2 for gentle 'Sleeping Wind', Speeds 3-4 for 'Natural Wind', and Speeds 5-6 for 'Strong Wind' cooling.
  • Dual Season Modes: Switch between Summer Mode (downward airflow for cooling) and Winter Mode (upward airflow to circulate warm air).
  • 360° Rotating Airflow: The fan features a 360° rotatable design, providing wide-angle airflow that covers every corner of the room, eliminating stuffy dead zones.
  • Ultra-Quiet Operation: The fan motor operates at a low noise level of 30-40dB, ensuring a peaceful environment, especially suitable for bedrooms.
6 Adjustable Wind Speeds Diagram
Figure 4: Illustration of the 6 adjustable wind speeds and their typical uses.
360 degree rotatable airflow diagram
Figure 5: Diagram showing the 360° wide-angle rotating airflow.
Winter and Summer mode airflow diagram
Figure 6: Illustration of switchable Winter Mode (upward airflow) and Summer Mode (downward airflow).

6. Remote Control Instructions

The included 19-key remote control allows for easy management of all fan light functions. (Note: The battery is not within the warranty range. If the remote control is not used for a long time, please remove the battery to avoid damage.)

Remote Control Diagram with button functions
Figure 7: Layout of the 19-key remote control and its functions.

6.1. Remote Control Button Functions:

  • Light on/off: Turns the light on or off.
  • ALL OFF: Turns off all functions (light and fan).
  • Auxiliary light/starry sky: Toggles auxiliary lighting or starry sky effect (if available).
  • Little Night Light: Activates the night light mode.
  • Brightness+: Increases light brightness (long press for continuous increase).
  • Brightness-: Decreases light brightness (long press for continuous decrease).
  • Color temperature+: Increases color temperature towards cooler white (long press to whiten light color).
  • Color temperature-: Decreases color temperature towards warmer white (long press to warm light color).
  • 2H: Sets a 2-hour timer for timed off.
  • F/R (Forward/Reverse): Switches between summer (forward) and winter (reverse) fan modes.
  • Shake your head: Activates the 360° rotating airflow function (Note: If the fan light does not have a shake head function, this button will not work).
  • Fan stop: Stops the fan.
  • Gear adjustment (1-6): Selects fan speed (1 is lowest, 6 is highest).
  • SETUP: Used for code matching the remote control.

6.2. Remote Control Code Matching:

To pair the remote control with the fan light:

  1. Press the SETUP button once within 10 seconds of the lamp being powered on.
  2. The light will flash once to indicate successful code matching.
  3. If matching fails, turn off the main power supply of the light fixture and repeat the steps until the light flashes once and the code is successfully matched.

7. APP Control

The Smart LED Fan Light can also be controlled via the FanLamp Pro App, offering convenient network matching and control over various functions.

7.1. Download the FanLamp Pro App

Scan the QR code below to download the FanLamp Pro App:

QR code for FanLamp Pro APP download
Figure 8: QR Code for FanLamp Pro App Download.

7.2. APP Matching & Teaching Video

Scan the QR code below to view an official video demonstrating the APP matching process and lamp teaching:

QR code for APP matching lamp teaching video
Figure 9: QR Code for APP Matching Lamp Teaching Video.

8. Maintenance

The Smart LED Fan Light is designed for easy assembly and disassembly, facilitating hassle-free cleaning of the fan components.

8.1. Cleaning the Fan

To clean the fan blades and grille:

  1. Ensure the power supply to the fan light is disconnected at the main switch.
  2. Gently rotate the outer ring of the fan light counter-clockwise to detach the power coupler base and separate the fan body.
  3. Carefully remove the fan blades and grille.
  4. Clean the components with a soft, damp cloth. Do not use abrasive cleaners or immerse electrical parts in water.
  5. Once clean and dry, reassemble the fan components and reattach the fan body by aligning and rotating clockwise until locked.
Video 1: Demonstration of easy assembly and disassembly for hassle-free cleaning of the fan light.

9. Troubleshooting

If you encounter any issues with your Smart LED Fan Light, please refer to the following common solutions:

  • Light or Fan not responding: Check if the main power switch is on. Ensure the remote control batteries are not depleted and are inserted correctly. Try re-pairing the remote control (see Section 6.2).
  • App connectivity issues: Ensure your smartphone's Bluetooth or Wi-Fi is enabled and the fan light is within range. Restart the app or the fan light if necessary.
  • Unusual noise from fan: Disconnect power and check for any obstructions in the fan blades. Ensure the fan is securely installed and all components are properly assembled after cleaning.

If the problem persists, please contact customer support for further assistance.

10. Specifications

ParameterValue
Control ModeFanLamp Pro App / 2.4GHz Remote / Wall Control (with memory)
Color Temperature2700K ~ 6500K + Warm Golden Backlight
Size (Diameter)49cm (19.29in)
Size (Height)19cm (7.48in)
Base Diameter23.5cm (9.25in)
Operating VoltageAC 220-240V, 50/60Hz
Max Power84W (Neutral light 58W, Cool/Warm white 29W, Backlight 11W, Fan 15W)
Body MaterialABS + PS
Coverage Area8-15㎡
Suitable Ceiling Height2.4m - 2.8m
Luminous Flux2000-82000
CertificationCE, EMC, LVD, ROHS
Product dimensions and control options
Figure 10: Visual representation of product dimensions and control methods.

11. User Tips

  • For optimal performance, ensure the remote control batteries are fresh. If the remote is stored for extended periods, remove the batteries to prevent leakage.
  • When using the FanLamp Pro App, ensure your device is connected to the internet and Bluetooth is enabled for seamless control.
  • Regularly clean the fan blades and grille to maintain efficient airflow and prevent dust buildup.

12. Warranty and Support

This product comes with a 1-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting, or warranty inquiries, please contact the seller or refer to the official MARPOU website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.