Bileeko Front View Camera for Honda

Contents

Bileeko Front View Camera for Honda

User Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko Front View Camera designed for various Honda models. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Bileeko Front View Camera installed in a Honda logo and a Honda Pilot

Figure 1: Bileeko Front View Camera overview, showing installation within a Honda logo and a compatible vehicle.

2. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your vendor.

  • Bileeko Front View Camera
  • Video Cable (6 meters)
  • Power Cable
  • Instruction Manual (this document)

3. Specifications

Below are the technical specifications for the Bileeko Front View Camera:

FeatureSpecification
BrandBileeko
Alarm TypeFront
Wire or WirelessWire
Video Cable Length6 Meters
Power Supply (Camera)DC 12V / DC 12-24V
Operating Voltage≤36V
Video SystemPAL/NSTC (Auto-switching)
Video Capture Resolution480p
Pixel Resolution480*272 / 800*480
Dimensions (Approx.)Height: 4.8cm (1.89in), Width: 4.7cm (1.85in)
CertificationsCE, FCC, RoHS
OriginMainland China
Product dimensions and multiple views of the camera

Figure 2: Camera dimensions and various angles.

4. Installation

Professional installation is recommended. Disconnect the vehicle's battery before starting any electrical work.

4.1 Installation Location

This camera is designed to be embedded within the front logo emblem of compatible Honda vehicles. Ensure your vehicle's front logo has an open space or a suitable cavity for camera placement. If your logo is closed or does not have an appropriate mounting point, this camera may not fit.

Installation location in Honda logo, modern Civic, camera views

Figure 3: Example of camera installation location within a Honda front emblem.

Compatible Honda models include, but are not limited to: CRV, URV, Civic 11 Mk11, Odyssey, Elysion, Fit, Jazz, City, Ballade (GE, GG, GK, GH, GP, GM 2008~2020).

4.2 Wiring Diagram

The camera requires power and a video signal connection to a compatible display unit (monitor not included). The wiring is straightforward:

  1. Power Connection: Connect the red wire from the camera's power cable to a 12V power source (e.g., ACC power or a dedicated front camera power supply). Connect the black wire (GND) to a vehicle ground point.
  2. Video Connection: Connect the yellow RCA video output cable from the camera to the video input (e.g., AV1 or AV2) on your car's display unit.
  3. Trigger Wire (Optional/If applicable): Some display units may have a trigger wire for front cameras. If your monitor supports automatic switching to the front camera view, connect the trigger wire from the monitor to a suitable trigger signal (e.g., a switch or specific vehicle signal). For basic operation, manual selection of the video input on your monitor will be required.

Refer to the diagram below for a visual representation of the wiring. Note that the diagram shows connections for both a monitor and a camera; focus on the "Only Camera" section for this product.

Wiring diagram for camera and monitor

Figure 4: General wiring diagram for camera connection. For this product, refer to the "Only Camera" section of the diagram.

Detailed Camera Wiring (from manual): The camera has a power input (red wire for +12V, black wire for GND) and a video output (yellow RCA connector). This video output connects to your display unit's video input. There is also a "Wire to Reverse Lights Positive" shown in the diagram, which is typically for rear cameras to trigger when reversing. For a front camera, this wire is usually not connected or connected to a manual switch if you want to activate the camera on demand.

5. Operation

Once the camera is correctly installed and wired to your display unit:

  1. Turn on your vehicle's ignition.
  2. Power on your display unit (car stereo, dedicated monitor, etc.).
  3. Select the appropriate video input channel (e.g., AV1, AV2) on your display unit where the camera is connected.
  4. The front view from the camera should now be displayed on your screen.

The camera provides a wide-angle view to assist with parking, navigating tight spaces, or observing obstacles directly in front of the vehicle.

6. Maintenance

  • Cleaning: Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners or solvents.
  • Inspection: Periodically check the camera's mounting and wiring for any signs of looseness or damage.
  • Environmental Factors: While designed for automotive use, extreme temperatures or prolonged exposure to harsh chemicals can affect the camera's lifespan.

7. Troubleshooting

If you encounter issues with your front view camera, refer to the following common problems and solutions:

  • No Image on Screen / Black or Blue Screen:
    • Ensure the camera and monitor are correctly connected and powered on.
    • Verify that the correct video input channel is selected on your display unit.
    • Check all power connections to the camera and display unit.
    • Inspect the video cable for any damage or loose connections.
  • Flickering or Distorted Image:
    • Check for loose video cable connections.
    • Ensure the power supply to the camera is stable (not fluctuating).
    • Verify proper grounding of the camera.
    • Check for electromagnetic interference from other vehicle electronics.
  • Image is Upside Down or Mirrored:
    • Some cameras have a small loop wire that can be cut to change image orientation (mirror/normal, up/down). Refer to specific camera features if available. This model does not explicitly state this feature, so ensure correct mounting.

If problems persist, consult a professional automotive electronics technician.

8. User Tips

  • Pre-Installation Check: Before fully installing, connect the camera and test its functionality with your display unit to ensure all components are working correctly.
  • Cable Routing: Route cables carefully to avoid pinching, chafing, or interference with moving parts. Use zip ties or cable clips to secure wiring.
  • Waterproofing: Ensure all connections exposed to the elements are properly sealed or protected to prevent water ingress.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.