FENVI AC1200

Contents

FENVI AC1200 WiFi Repeater User Manual

Model: AC1200

1. Introduction

The FENVI AC1200 WiFi Repeater is designed to extend your existing WiFi network coverage, eliminating dead zones and providing a stronger, more reliable wireless signal throughout your home or office. This device supports dual-band operation (2.4GHz and 5GHz) for versatile connectivity and high-speed data transfer.

For detailed visual instructions and diagrams, please refer to the official user manual PDF available at FENVI AC1200 User Manual (PDF).

2. Package Contents

  • FENVI AC1200 WiFi Repeater
  • Quick Installation Guide

3. Setup Instructions (Repeater Mode)

Follow these steps to set up your FENVI AC1200 WiFi Repeater in Repeater Mode:

  1. Power On: Plug the WiFi extender into a power outlet. Wait for approximately 30 seconds. The LED indicator will change color (for AC1200, it changes from Green to Blue) indicating it's ready for setup.
  2. Connect to Extender: On your computer or smartphone, disable mobile data and connect to the WiFi network named "Fenvi-XXXX" (where XXXX is usually the last four characters of the device's MAC address). If your device prompts that the network has no internet, click to continue.
  3. Access Setup Page: Open a web browser (e.g., Chrome, Firefox) and type 192.168.188.1 into the address bar, then press Enter.
  4. Select Main Router: On the setup page, you will see a list of available WiFi networks. Select the SSID (name) of your main router that you wish to extend.
  5. Enter Password: Enter the WiFi password of your main router into the provided box. Click "Next".
  6. Configure Extender SSID (Optional): You can set new wireless names (SSIDs) and passwords for the extended network. By default, it will append "-PRO-2.4G" or "-PRO-5G" to your main router's SSID. If you don't want to modify these, you can proceed to the next step.
  7. Confirm Settings: Review your new wireless names and passwords. Click "Start Connect".
  8. Wait for Connection: The extender will connect to your router. This process may take 30-60 seconds.
  9. Verify Setup: After the setup is complete, observe the signal indicator. A green light indicates a successful relay and a strong signal.
  10. Reconnect to Extended Network: Disconnect from "Fenvi-XXXX" and reconnect your devices to the newly created extended WiFi network (e.g., "YourRouterName-PRO-2.4G" or "YourRouterName-PRO-5G").
FENVI AC1200 WiFi Repeater

Figure 1: FENVI AC1200 WiFi Repeater

4. Operating Modes

4.1. Repeater Mode (Extender Mode)

This is the default mode, as described in the setup instructions above. The device extends the coverage of your existing WiFi network.

4.2. AP Mode (Access Point Mode)

In Access Point (AP) mode, the repeater connects to your wired network and broadcasts a new wireless network. This is useful for adding WiFi capability to a wired-only network or creating a new WiFi hotspot.

  1. Reset Device: If the device is already configured in Repeater Mode, perform a factory reset by pressing the RST button for about 8-10 seconds.
  2. Connect to Extender: Connect your device to the "Fenvi-XXXX" WiFi network.
  3. Access Setup Page: Open a web browser and go to 192.168.188.1.
  4. Select AP Settings: On the setup page, look for and click on "AP Settings".
  5. Set Wireless Password: Configure the wireless name (SSID) and password for your new AP network. Click "Apply".
  6. Connect Ethernet: Plug an Ethernet cable from your router (or network switch) into the LAN port of the FENVI AC1200. Your devices can now connect to the new WiFi network broadcast by the extender.
Wireless Access Point Mode Diagram

Figure 2: Wireless Access Point Mode - Connect to wired internet to create a new WiFi network.

5. Specifications

FeatureDescription
Model NameAC1200
Brand NameFENVI
Wireless Standard802.11ac
Frequency Band ClassDual-Band (2.4GHz & 5GHz)
2.4GHz SpeedUp to 300Mbps
5GHz SpeedUp to 867Mbps
Total Wireless Rate1200Mbps
With Modem FunctionNo
Number of USB InterfacesNone
Plug TypeEU Plug, US Plug (depending on variant)
Package Dimensions (L x W x H)12cm x 8cm x 6cm
Package Weight0.135 kg
FENVI AC1200 Performance Overview

Figure 3: High-speed dual-band performance for various activities.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
  • Ventilation: Ensure the device is placed in a well-ventilated area to prevent overheating. Do not cover the ventilation holes.
  • Environment: Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
  • Resetting: If the device is not functioning correctly or you need to reconfigure it, perform a factory reset by pressing and holding the RST button (usually located in a small pinhole) for 8-10 seconds until the lights flash.

7. Troubleshooting (FAQ)

Q1: My Wi-Fi says connected but I have no internet connection.

  • First, check if your main router's Wi-Fi is actively working and providing internet access.
  • If the Extender's indicator light keeps flashing off, it means the connection failed. This could be due to an incorrect password entered during setup or other issues. Try restoring factory settings (press RST button for about 10 seconds) and set up the Extender again.

Q2: What is the username and password for setting up the Extender?

  • No username or password is required to enter the initial setup webpage of the Extender.
  • After the initial setup, you cannot access the setting page unless you perform a factory reset.

Q3: Why are some devices at home (Printer, CCTV, camera, TV, Phone) unable to connect to the Extender?

  • This usually means the device does not recognize the Extender. Ensure the device you are trying to connect is on the same network as your main router.

Q4: Why am I unable to enter the webpage (192.168.188.1)?

  • If you cannot enter the setup webpage (192.168.188.1) after the extender has been set up, you need to restore factory settings (press RST/WPS button for about 10 seconds) and then try again.
  • Ensure you are connected to the Extender's WiFi network (e.g., "Fenvi-XXXX") during setup.
  • Disable your mobile device's cellular data during setup.
  • Try using a different mobile device or a PC.

8. User Tips

  • Optimal Placement: For best results, place the WiFi repeater roughly halfway between your main router and the area where you experience weak WiFi signals. Avoid placing it in corners or near large metal objects.
  • Avoid Obstructions: Walls, floors, and large appliances can interfere with WiFi signals. Try to place the repeater in a location with minimal physical obstructions between it and your main router, and between it and your devices.
  • Stable Main Router: Ensure your main router is functioning optimally and providing a stable internet connection. The repeater can only extend the quality of the signal it receives.

9. Support

For further assistance, troubleshooting, or warranty inquiries, please refer to the official user manual PDF or contact the seller directly.

Official User Manual (PDF): FENVI AC1200 User Manual (PDF)

© 2023 FENVI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.